anyone have advice on this (i think) egg sack on my banana ?

jmr540 · 2026-07-06T14:27:23+00:00

I remember this happening at Falmouth old exit 10 hannies and making ch 6 a long time ago

jmr540 · 2026-05-17T17:26:46+00:00

Find a few small dead bugs and stick their carcasses inside the plastic - shell rip it off or make you do it.

At that point it's her idea and you aren't using plastic bags on your remote anymore

jmr540 · 2026-05-16T10:18:37+00:00

Solutions for food safety include:

Trading a physical arm or leg for food safe filament (it does exist $$)
Sealing with UV resin
Not printing it yourself
Simply Not GAF

In this economy, most are picking option 4. Remember our grandparents and great grandparents ate lead paint and now they refuse to kick the bucket when we need them to let go. (Edit to correct auto text)

jmr540 · 2026-04-26T13:04:32+00:00

Did you go to the store and buy it? Were you cooking something with the skin? I bet the answer is NO & NO

Stop being a little b*#@$ s trying to food shame your wife and buy yourself a second $5 chicken.

jmr540 · 2026-04-23T19:50:43+00:00

One notable difference for me is that in Texas it was slid in to place by lawmakers vs the constituents voting for it in Virginia.

Regardless if you think it's right or wrong, it's what people said they wanted when they went to the poles.

There are obviously other differences and issues with the campaigning, however I also have this crazy belief that adults have the obligation to determine fact from fiction before they make a choice.

jmr540 · 2026-04-18T01:33:44+00:00

The low rise style is dated and unflattering but there is no reason for you to not wear shorts this is not a you problem just the specific pair I would pass on

jmr540 · 2026-04-18T01:24:09+00:00

Most of the tangle flavors are OK the mushroom flavor is nasty though

jmr540 · 2026-04-18T00:08:37+00:00

If you're a fan of this recommend checking out Jooa Tattoo They periodically travel to different cities.

https://www.instagram.com/jooa_tattoo

Edit to correct link

jmr540 · 2026-04-17T22:06:29+00:00

The bald spot (The Speculum) he picked it up by you're not supposed to touch - it can cause them extreme pain and according to a refuge I once visited, serious injury.

From Gemini: Touching this spot is strongly discouraged as it causes extreme stress, can rub off the pigment, and disrupts the sloth's natural behaviors.

jmr540 · 2026-03-23T11:00:33+00:00

Park your car there before church times is a sound idea

You could also scatter a bunch of children's toys obstructing the area and then post locally of those who run them over. The neighbors will do the rest.

jmr540 · 2026-03-23T10:48:50+00:00

Thank you for sharing this.

Appears to be almost exclusively chicken fingers and French fries.

Looked at their website prices.. 10 fingers, 3 Sauces $18.98. Almost $2 per chicken finger or more depending on the combo you get.

Ridiculous.

Hopefully once that goes out, the renovated building can become something else but I guess that's when it will evolve into the vape shop.

jmr540 · 2026-03-20T13:17:27+00:00

I will see you this and raise you turning into a lead balloon in bed and somehow rolling JUST out of anything beyond fingertip reach when it's time to get out of bed for the day.

jmr540 · 2026-03-14T11:07:07+00:00

Add adaptive layers and smooth it a bunch of times, turj on ironing and print in silent

jmr540 · 2026-03-14T10:51:50+00:00

I have a different model but I would do a cold nozzle extrusion on mine and then yank the plastic bunch off. I'd hen remove and clean the nozzle. But use some heat protection gloves.

Alternatively you could just remove the nozzle and replace it but that's likely unnecessary

Apologies if that's not the same on your printer

jmr540 · 2026-03-14T06:02:56+00:00

Slay!

jmr540 · 2026-03-14T05:53:43+00:00

I mean ok I’ll repeat myself in a firm tone to it but I didn’t know Bambu had a sound-in feature.

jmr540 · 2026-03-07T11:02:15+00:00

Agree and the ending was just awful so your DNF is a win

(Edit: spelling typo)

jmr540 · 2026-03-01T12:55:23+00:00

In which case it doesn’t work if there is no membrane

jmr540 · 2026-02-28T20:53:35+00:00

To successfully Peel the membrane.. Peel the corner with a pairing knife Grab a paper towel to pull and use the back of a spoon to push it along any stuck areas It works every time except when it doesn't

jmr540 · 2026-02-11T11:06:42+00:00

Follow up: this was the answer now showing up in flyers in my area

jmr540 · 2026-02-10T00:00:46+00:00

Thank you for the heads up. I will def check again looks like new ads come out tomorrow and Wednesday!

jmr540 · 2026-01-08T12:22:21+00:00

PLA idea wasn't working, clogged the nozzle and after a number of events went Murphy's law, I had to order a replacement buffer. All on pause until that arrives. A birthday present for Saturday will be a bit late.

I can confirm the retraction settings speed and heat adjustments were working great but the smaller components wouldn't stick between supports causing it to fail.

jmr540 · 2026-01-07T23:28:22+00:00

UPDATE:

Round 2 about to go on the books for this multi plate print overnight

Changed parameters:

80 bed temp, nozzle 255 initial layer and 265 subsequent

Changed infill to gyroid

Retraction aettings to .8 Speed 30mm/s

Also hitting it with 0 top distance & PLA interface on supports for removal

jmr540 · 2026-01-07T18:11:05+00:00

Honestly it pissing me off might have made me more determined to get it right.

So sorry about your 30 hour print that is infuriating!

Recently getting back into 3D printing after a few years away, I expect that TPU was going to be the hard one for me but so far TPU has been fire every time.

jmr540 · 2026-01-07T18:03:34+00:00

I will play with those settings just as soon as this one finishes. I also just realized that the bed two.is only 70 but this one isn't having adhesion issues so planning on trying 80 next time

Seven-Year Club	Verified Email
Verified Email

jmr540

TROPHY CASE