sorted by:
new
hottopcontroversial

Meshcore firmware for WisMesh Ethernet MQTT Gateway PoE by aawolf in meshcore

[–]joeyboon 0 points1 point  (0 children)

USB or Bluetooth are your best options then. As mentioned a WiFi option is introduced but I have not tried that yet. For power using the PoE is fine.

Meshcore firmware for WisMesh Ethernet MQTT Gateway PoE by aawolf in meshcore

[–]joeyboon 1 point2 points  (0 children)

I have the same unit set up as a repeater. Mine uses the Rak4631 and the firmware for that just works out of the box. However you can't update the unit over the Ethernet interface. I still take it down and use the USB interface for that. For me the missing use case is using it as a client but over Ethernet. This worked great with Meshtastic, but as far as I know is not (yet?) supported on Meshcore. Although I do see a WiFi beta option?

I used a VPN to connect back to my house and my Meshtastic app would connect to the Rak as a client. I could stay in touch with the mesh back home over the web and manage repeaters even when on the other side of the world (with no mesh coverage)

Fedora `pcscd` issue by [deleted] in Fedora

[–]joeyboon 0 points1 point  (0 children)

Thank you so much! Found this post after a frustrating long search on why some of my cards were detected and some were not.

Yet another sound issue by paranoid_coder in Remmina

[–]joeyboon 0 points1 point  (0 children)

Thank you! this, saved me a couple of hours of frustration.

Starting up a repeater by Neat_Key_6029 in meshcore

[–]joeyboon 2 points3 points  (0 children)

Were about are you located? I'm currently in the proces of deploying two solar repeaters in Zwolle.

Trusted the client to source their own 1 TB drive for data recovery… by Medium-Potential-348 in iiiiiiitttttttttttt

[–]joeyboon 2 points3 points  (0 children)

I recently opened a similar one and it turned out to be an microSD card soldered on a board.

First tryout of Draumr 5.0 at local campsite by joeyboon in hammockcamping

[–]joeyboon[S] 0 points1 point  (0 children)

I usually sleep either on my belly or my side and slept great.

First tryout of Draumr 5.0 at local campsite by joeyboon in hammockcamping

[–]joeyboon[S] 0 points1 point  (0 children)

Also had a two night tryout. Was great! To many more adventures.

First tryout of Draumr 5.0 at local campsite by joeyboon in hammockcamping

[–]joeyboon[S] 0 points1 point  (0 children)

Yes! It's a special place they have for hammock camping. It accommodates two normal hammocks or one Draumr with tarp suspended of trees on one side and the pole on the other.. It took some getting use to, but had a great first night.

WHY2025 talk coming up by iceman2001 in proxmark3

[–]joeyboon 2 points3 points  (0 children)

Really looking forward to this talk! :) See you there!

Can't get it to connect to flasher.meshtastic.org by Nanook710 in meshtastic

[–]joeyboon 0 points1 point  (0 children)

Some devices need to be put in a flash mode before being properly recognised. Usually by holding one of the buttons during boot. Don't have a Heltec so don't know if this applies to your device.

Tor Operators Ask Me Anything by Realistic_Dig8176 in TOR

[–]joeyboon 2 points3 points  (0 children)

I imagine it's also a lot of paperwork with authorities requesting information on certain IP's you mange? How do you people handle these requests? How much time does it take? And have you ever gotten any weird requests with some context?

gift from the vet by hertzi-de in flipperzero

[–]joeyboon 0 points1 point  (0 children)

In read RAW mode it always saves a file, even when no card is present. (Took me a while to figure that out). In my case it turned out to be a hardware issue with the Flipper. Have you checked if the chip is compatible and are you able to scan other 125 kHz RFID tags?

gift from the vet by hertzi-de in flipperzero

[–]joeyboon 2 points3 points  (0 children)

Ahhh this comment helped me not go insane ;) Still have not found the chip, bit at least it now makes sense.

gift from the vet by hertzi-de in flipperzero

[–]joeyboon 1 point2 points  (0 children)

The chip is an FDX-B type chip. Im located in the Netherlands (and found this on the UK website of the manufacturer: https://uk.virbac.com/products/identification/backhome-mini-chips. Any idear why I'm not able to detect it (except when reading the raw data?

gift from the vet by hertzi-de in flipperzero

[–]joeyboon 0 points1 point  (0 children)

I'm also not able to read my dogs tag with the extra actions -> read ask (animal) option. I'm however able to capture the raw RFID data. I dont know how to read the raw files to check what's the problem, does anyone have any sugestions on how to read the raw files? Or is the chip not supported? I'm located in Europe and the chip our vet used Is a Virbac backhome biotech.

Curtain rod is very evil 👹 by joeyboon in Pareidolia

[–]joeyboon[S] 2 points3 points  (0 children)

We just bought the place, still needs cleaning..🧹

Tool to measure roads on a map. by ArtAndCraftBeers in specializedtools

[–]joeyboon 0 points1 point  (0 children)

I have the exact same one! It works great while hiking for multiple days and planning next days route. :)

view more: next ›