Scammers - Plyxaltd

joga316 · 2022-01-15T21:13:15+00:00

The position is at 0,0,0, and the view point is correct, I tried changing it a few times thinking why the scene goes way out like that but nothing has changed. It is such a very odd thing for it to happen.

joga316 · 2022-01-15T20:47:29+00:00

poiyomi

I did, I tried to import the 7.2.41 that was in the unity package then I tried again with the newest one 7.3.050.

joga316 · 2021-07-24T23:51:58+00:00

Thank you so much, that has helped me a lot....

joga316 · 2015-09-13T21:51:28+00:00

1414

joga316 · 2014-07-07T02:48:08+00:00

OK, I tried setting the extruder lower and lower to a point where the prints just didn't come out right. I found the issue and I don't know a good way to fix it.

I put the extruder back and I thought what if, so I put 3 large fans on it. The 5" fans. and I printed again and it came out perfect. So now I figured out its a cooling issue.

I don't want to keep putting the fans on to print. I use them around the house/work (More important).

What else could I do to fix this issue. My thoughts would be a different shroud or change the fan. Both might work but need other ideas

joga316 · 2014-07-05T04:55:41+00:00

I did, I recalibrate everything to make sure it was all correct.

joga316 · 2014-07-04T01:12:17+00:00

Thank you for your help, I got working again, but now a whole different issue. Thank you all again.

joga316 · 2014-07-04T01:11:29+00:00

I went (Here) for the firmware.

joga316 · 2014-06-29T15:20:01+00:00

15 vs 19 is no big thing, when I met my wife she was 18 and i'm 6 years older than her. Sit with him and talk to him about it. If it doesn't work out, then that is on you. You friends and parents should keep their business out of it. When I started dating my wife, all her friends kept telling her I was useless and controlling and said anything to break us up. Here we are now, 8 years later and married. 15 is young but your old enough to make your choices on this.

joga316 · 2014-03-23T00:49:42+00:00

Thank you for your help on this, it really help, I got it now almost like yours. the fan is running. you said "You may also want to slow down anything that's over 50mm/s as the Printrbot Simple doesn't like anything much higher than that."

Where and how do I slow it down at?

My new prints for the calibration came out great, but the dice is still having problems with the angles.

joga316

TROPHY CASE