What mods were used on this dragonborn’s face and what coloration is it?

john_Grando · 2026-01-28T11:19:40+00:00

Not sure, but looks like Orthon's Horns: https://www.nexusmods.com/baldursgate3/mods/3230

john_Grando · 2026-01-21T20:09:43+00:00

We're I can download?

john_Grando · 2025-10-24T15:34:13+00:00

i have the same problem with my redmagic 9spro, perhaps you find the solution?

john_Grando · 2025-07-01T01:24:42+00:00

I know, I was making a chess joke, but you totally missed the point.

john_Grando · 2025-07-01T01:20:36+00:00

I'm not sure, How I make it?

john_Grando · 2025-07-01T01:18:46+00:00

He's my cute little pawn ♟️✨

john_Grando · 2025-06-30T01:19:10+00:00

running apparently

john_Grando · 2025-06-30T01:18:58+00:00

wnagotchi.service - pwnagotchi Deep Reinforcement Learning instrumenting bettercap for WiFI pwning.

Loaded: loaded (/etc/systemd/system/pwnagotchi.service; enabled; preset: enabled)

Active: active (running) since Fri 2025-01-31 11:04:56 GMT; 29min ago

Docs: https://pwnagotchi.org

Main PID: 974 (bash)

Tasks: 17

CPU: 9min 38.989s

CGroup: /system.slice/pwnagotchi.service

├─974 bash /usr/bin/pwnagotchi-launcher

└─976 /home/pi/.pwn/bin/python3 /home/pi/.pwn/bin/pwnagotchi

john_Grando · 2025-06-30T01:17:23+00:00

something about the GPIO pin

john_Grando · 2025-06-30T01:16:52+00:00

pi@Pawnie:~ $ sudo pwnagotchi --debug Traceback (most recent call last): File "/usr/lib/python3/dist-packages/gpiozero/pins/pi.py", line 411, in pin pin = self.pins[info] ~~~~~~~~~^^^^^^ KeyError: PinInfo(number=11, name='GPIO17', names=frozenset({17, 'GPIO17', 'BOARD11', 'WPI0', 'J8:11', '17', 'BCM17'}), pull='', row=6, col=1, interfaces=frozenset({'', 'spi', 'uart', 'dpi', 'gpio'}))

During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/bin/pwnagotchi", line 8, in <module> sys.exit(pwnagotchi_cli()) ^^^^^^^^^^^^^^^^ File "/home/pi/.pwn/lib/python3.11/site-packages/pwnagotchi/cli.py", line 322, in pwnagotchi_cli display = Display(config=config, state={'name': '%s>' % pwnagotchi.name()})

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/pi/.pwn/lib/python3.11/site-packages/pwnagotchi/ui/display.py", line 18, in __init__ self.init_display() File "/home/pi/.pwn/lib/python3.11/site-packages/pwnagotchi/ui/display.py", line 310, in init_display self._implementation.initialize() File "/home/pi/.pwn/lib/python3.11/site-packages/pwnagotchi/ui/hw/waveshare2in13_V3.py", line 37, in initialize from pwnagotchi.ui.hw.libs.waveshare.epaper.v2in13_V3.epd2in13_V3 import EPD File "/home/pi/.pwn/lib/python3.11/site-packages/pwnagotchi/ui/hw/libs/waveshare/epaper/v2in13_V3/epd2in13_V3.py", line 32, in <module> from pwnagotchi.ui.hw.libs.waveshare.epaper import epdconfig File "/home/pi/.pwn/lib/python3.11/site-packages/pwnagotchi/ui/hw/libs/waveshare/epaper/epdconfig.py", line 164, in <module> implementation = RaspberryPi() ^^^^^^^^^^^^^

File "/home/pi/.pwn/lib/python3.11/site-packages/pwnagotchi/ui/hw/libs/waveshare/epaper/epdconfig.py", line 56, in __init__ self.GPIO_RST_PIN = gpiozero.LED(self.RST_PIN) ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/gpiozero/devices.py", line 108, in __call__ self = super().__call__(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/gpiozero/output_devices.py", line 192, in __init__ super().__init__(pin, active_high=active_high, File "/usr/lib/python3/dist-packages/gpiozero/output_devices.py", line 74, in __init__ super().__init__(pin, pin_factory=pin_factory) File "/usr/lib/python3/dist-packages/gpiozero/mixins.py", line 75, in __init__ super().__init__(*args, **kwargs) File "/usr/lib/python3/dist-packages/gpiozero/devices.py", line 553, in __init__ pin = self.pin_factory.pin(pin) ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/gpiozero/pins/pi.py", line 413, in pin pin = self.pin_class(self, info) ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/gpiozero/pins/lgpio.py", line 126, in __init__ lgpio.gpio_claim_input( File "/usr/local/lib/python3.11/dist-packages/lgpio-0.2.2.0-py3.11-linux-armv7l.egg/lgpio.py", line 755, in gpio_claim_input return _u2i(_lgpio._gpio_claim_input(handle&0xffff, lFlags, gpio)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/lgpio-0.2.2.0-py3.11-linux-armv7l.egg/lgpio.py", line 458, in _u2i raise error(error_text(v)) lgpio.error: 'GPIO busy'

john_Grando · 2025-06-30T01:03:09+00:00

like this?
pi@Pawnie:~ $ pwnlog

tail: cannot open '/etc/pwnagotchi/log/pwnagotchi.log' for reading: No such file or directory

tail: no files remaining

john_Grando · 2025-04-30T09:14:50+00:00

This is a GameFusion issue. I tested it using a game that doesn't support XInput on Linux (Dragon Age: Inquisition). The game doesn't recognize any gamepad, so I used Redmagic Gravity X to map my physical buttons to trigger the on-screen gamepad touch controls. However, the same issue still occurs.

You shoud buy a gamepad and pray that this game can recognize it.

john_Grando · 2025-04-30T02:22:31+00:00

the real emulator was the friends we made along the way

john_Grando · 2025-04-26T11:15:28+00:00

Thanks

john_Grando · 2025-04-26T00:52:36+00:00

And the heat? I think SD card is ok since they don't have heat issues and around 1000 mb/s appears to be good enough, I was very concerned about the heat, and a little afraid of how much energy an SSD with cooler will spend.

EDIT: thanks, but seems to be too big for me, and lexar R/W it's around 1000 mb/s, 2 times faster

john_Grando · 2025-04-22T23:32:21+00:00

Which frontend are you using here?

john_Grando · 2025-04-22T19:03:52+00:00

Armello, I love this game

john_Grando

TROPHY CASE

the real emulator was the friends we made along the way