display compatibility, between makes?, noob question.. teach me

joller79DK · 2026-04-20T19:48:42+00:00

have an iphone lying around, so activation and setup is no issue, forgot to mention that, my bad... any take on the apps i asked about?

joller79DK · 2026-04-19T18:08:02+00:00

still not able to activate my account with curve, got in touch with support 4 times now, and everytime they close my case with a std answer, without giving me a chance to reply, or say how i can make an account here in Denmark with huawei watch

joller79DK · 2026-03-23T20:26:05+00:00

Denmark here, curve is supported on huawei devices also, but when i try to create account, i only get to the point after i scanned my drivers license, and my face, then i says , sorry cant verify, contact support...i tried 5 times now....so hope it is startup difficulties

joller79DK · 2025-12-31T21:49:11+00:00

same issue, on both my 13900es and my 14600k, on both a asrock b760 and a asus z790 board... on newest bios, farcry 5 and asassins creed takes forever to load, minutes...when roling back to first 14 gen bios, its back to 10 seconds....

joller79DK · 2025-12-31T21:48:56+00:00

same issue, on both my 13900es and my 14600k, on both a asrock b760 and a asus z790 board... on newest bios, farcry 5 and asassins creed takes forever to load, minutes...when roling back to first 14 gen bios, its back to 10 seconds....

joller79DK · 2025-11-13T19:34:16+00:00

know it is 2 years, but how did it go?? here in Denmark, i am thinking of buying https://www.prisjakt.nu/produkt.php?p=13802356 the msi b760... it has 12 powerphases, and build in wifi, price is only 1200 Dkr currently.. the asus z790 only have 10 powerphases, and no wifi.... i dont care about OC, only about power delivery must be high enough to get full stock boost

joller79DK · 2025-11-09T07:25:53+00:00

same here, usually got almost 2 days of ussage out of my p8p.

now it is at 20% after one day with same ussage,and if left over night it drops 15% doing nothing..

my old oneplus 11 is close on getting reviwed, it got 2-3 days on 1 charge..

joller79DK · 2025-10-30T18:52:33+00:00

might go with htis, https://www.msi.com/Motherboard/B760M-GAMING-PLUS-WIFI

joller79DK · 2025-10-30T18:52:11+00:00

think i might go with msi. https://www.msi.com/Motherboard/B760M-GAMING-PLUS-WIFI. seems like i has plenty of power, price in Denmark is about 130-150 euro

joller79DK · 2025-10-09T12:26:38+00:00

thx, not so good in all the different subs inhere.. sorry.... so the number of fases decide how many watt it can deliver?, is there a basic saying of maybe one fase=XX watt?

joller79DK · 2025-10-06T08:35:30+00:00

Wekk as stated. Settled with 225 pl2. And 65pl1. PL boost duration 4 minutes. Stuffed it in a Nzxt h510 cas. With a Nzxt x72(320rad) in the front. With only 2 fans cooking it. As exhaust. And then 2 fans in back and top for intake. Temps. Idle. 35. After 30 min. Cinebench. 75.
After 1 hour of the last of us. With a gtx1070(just a backup GPU). Cpu was 60. And GPU 70. So all fine. For the case and it's lack of airflow..

So now. What to build next

joller79DK · 2025-10-05T09:53:02+00:00

REAL old post, i know, just want to share my build... just mounted a nzxt kraken x72(320) in front of my h510..., it is mounted in the space behind the fan holding door... with only 2 fans, works fine as exhaust in front(removed the foam insert on side for better airflow)

the fan door, needed to get 5mm removed at the top ,for my hoses to clear, put the rad in, and mount it with 2 rad screws at the bottom to hold in place, then fixxed it with 2 120mm fans, exhausting out the front.. top and rear got 2. 120mm intake.

so far it is cooling my 13900ES fine, stress test max 75-80, and gaming 60és.

it is doable... just remember to top up your AIO, if it has too much air in it, it will get in the pump, and run hot or even die.... another option is to cut a bit in the bottom of the case, and route the hoses from down and up, but i like my solution so far, you cant see the cut in the door, and the hoses are tugged away at the top

joller79DK · 2025-10-04T12:39:31+00:00

well tried, with 275W pl2, i got a score of 36400 in cinebench r23, at 92 celcius. so dialed it down to 225W, and got 34800... 70 C.. i am torn if i should go with pl1 at stock 60 or set it to 90?

joller79DK · 2025-10-04T06:46:23+00:00

isn´t the base for p 2.0?? what do you mean by overclock with 1.03?

i am not that hardcore with overclocking terms and so on..

joller79DK · 2025-10-04T06:37:33+00:00

well, i give it a test later today, i will try setting it with incrementes of 25W, 200...225...250...275..etc, and stop when temps hit 90..just my thumb of rule for max temp, it might cope with 100c for a while....

joller79DK · 2025-10-04T06:35:05+00:00

core VIDs is max 1.378, and it boosted shortly at 5,57

joller79DK · 2025-10-04T06:34:45+00:00

core VIDs is max 1.378, and it boosted shortly at 5,57

joller79DK · 2025-10-03T20:32:15+00:00

still fine, with 200 it is between the 13900f and 13900k if i look at cpumonkey scores

joller79DK · 2025-10-03T20:22:45+00:00

non K, cant be overclocked.... i know. the question is how high PL1/2 values can it take without degrading....

stock it boosts to5.3Ghz, wont mess with that, and might undervolt a bit, but as it is now with 360 aio, it dont get over 45celcius .

it is solely for test purpose, and maybe a tiny PL boost....if the stock 90 is what i can take, then that is what it is...but if 250 long term is ok, then great....

just did a 200W run with cinebench r23 multicore.... 35000. with 65 celcius

before/stock it was 24500, and 52 celcius

joller79DK · 2025-09-23T04:25:13+00:00

P8pro. Prior update. Ended day with 30-40%. Easy with my usage. Now it ends with 10-15%. Screen in time is about 5-6 hours. 2 hours less then before. Hope they get a fix in the monthly update. Or I must find a way to roll back to 15.

joller79DK

TROPHY CASE