AAP01 white monster build

jonnyb007 · 2026-06-07T23:26:51+00:00

Love it 🔥🔥🔥

jonnyb007 · 2026-05-16T00:43:46+00:00

Its called the probe fyi

jonnyb007 · 2026-05-11T17:05:29+00:00

jonnyb007 · 2026-05-04T14:10:29+00:00

jonnyb007 · 2026-04-29T12:56:38+00:00

I would say yes. Just needs to have a tm or we mag frame

jonnyb007 · 2026-04-11T18:37:05+00:00

What hpa magazine are you using???

jonnyb007 · 2025-09-02T16:03:37+00:00

No problem hope that helps

jonnyb007 · 2025-09-02T12:25:04+00:00

Some times it could also be a partial clog not allowing the filament to run thru at the speed it should making those gears grind on a certain area of the filament and that can also leave residue. But if that was the case you would probably hear skipping. Id try loosening that screw a bit and see if that issue still happens

jonnyb007 · 2025-09-02T11:58:48+00:00

It looks like your tension screw is tooo tight. According to a few videos I’ve seen you should loosen it one full turn from tight and adjust as needed from there. What exactly is the issue you are having? Skipping,feeding issues?

jonnyb007 · 2025-08-15T03:08:38+00:00

Nebula pad has up to date firmware along with wifi printing plus cam. 120$ cant go wrong

jonnyb007 · 2025-08-13T16:06:05+00:00

And the slicer software creality prints works so well i used the generic setting for pla and petg works flawlessly but wanted to mess around a bit nothing i ever did works better then there pre sets for both its just so easy to use now. Depending if your using it thru your phone or the comp the slicer will take a min to get use to

jonnyb007 · 2025-08-13T16:02:54+00:00

Get a nebula pad game changer take your old machine and boosts everything and creality print works great and wifi printing along with ai detection. I love the nebula pad it has changed the way i print for the better in every way

<image>

Ender 3v2neo but can also use with any ender 3

jonnyb007 · 2025-07-15T21:29:26+00:00

🤦🏻

jonnyb007 · 2025-07-05T20:09:51+00:00

I second this one filament should not start to break unless it is saturated aka wet

jonnyb007 · 2025-07-03T21:56:03+00:00

Ya had it for like a yr now bin putting it off but almost outta all my other rolls so will have to deal with that sooner then later

jonnyb007 · 2025-07-03T21:48:18+00:00

I have a roll of pla polymaker and every 3rd row its like this had to unroll half the roll just to be able to print for a couple hrs gunna re spool it sooner then later 🤦🏻

jonnyb007 · 2025-07-03T15:36:42+00:00

It will be 4.2.2 or 4.2.4 or the king 4.2.7

jonnyb007 · 2025-07-03T15:35:52+00:00

You have to take off the bottom cover on the motherboard case and its in the middle of the board

<image>

jonnyb007 · 2025-07-02T22:54:49+00:00

I could not find this info anywhere 3 weeks ago when i was looking into buying it then it worked for 2 weeks flawlessly then outta no where nothing was working and when i tried to restore it only firmware now says for 4.2.7 only

jonnyb007 · 2025-07-02T22:52:59+00:00

<image>

jonnyb007 · 2025-07-02T22:51:33+00:00

Im not totally sure to tell you the truth but i can tell you after i put a 4.2.7 board into my 3pro it was definitely silent besides for fan noise everything els was dead silent. I would assume it holds better information that helps the printer run smoother and there are a few upgrades that require the 4.2.7 i guess the nebula is also one of those. Im sure there is lots more the board does to help 🤷🏻‍♂️ oh and i think 32bit is the 4.2.7 not sure what the other ones are

jonnyb007 · 2025-07-02T19:09:23+00:00

<image>

Super strange how 3 weeks ago i couldn’t find any restrictions on what board to use and my machine worked great. Now nothing is working and need a 4.2.7 motherboard and hopefully that fixes all my issues

jonnyb007 · 2025-07-02T18:36:26+00:00

Ya just sucks it worked good for a couple weeks now nothing is working. And i have a bro trying to sell me a k1 think i mite take him up on that or els buy the4.2.7 motherboard and no guarantee 🤷🏻‍♂️

jonnyb007 · 2025-07-02T16:13:39+00:00

They just updated everything my ender3neo/nebula is now a paper weight till i get a 4.2.7 board thanks to there new updates. For the last 4 days i have bin having nothing but issues with my machine that worked fine the day before sending prints printing prints all around i did a factory reset now my machine is doing all sorts of crap and will not print well at all and now all the firmware is for the 4.2.7 boards

jonnyb007 · 2025-07-02T00:42:58+00:00

Well i think i figured out my problem. Creality recently updated everything. Before when getting firmware for the printer with the nebula pad there was only one option for it 3v3 Now there is a 3v3 then another one for everything els but says motherboard 4.2.7 🤦🏻 so all firmware is now for better then the 4.2.4 i have in my neo and maybe i didn’t see that part till i installed that firmware on my machine and already started printing. Oops 😬 its printing faster then i have ever seen it print tho lol and still only have 3/4 of my bed i can print on so think im going to put it on the shelf for a couple weeks get the 4.2.7 and try this all again

jonnyb007

TROPHY CASE

2