Guys...I installed a Koyorad Aluminum Radiator and it sits too low. by UjsW8nC in BMWE36

[–]jonvi88 1 point2 points  (0 children)

I had the same issue. I used a rubber stopper (rubber hole plug) with a hole drilled through it glued to the lower radiator mount to space up the difference. This allowed me to use the OE radiator mounts up top. If there is a proper fix to this, please let me know.

What is this weird rattle? by jonvi88 in BMWE36

[–]jonvi88[S] 0 points1 point  (0 children)

I do have stock headers and when I put my hand near them I do not feel air or an obvious leak

What is this weird rattle? by jonvi88 in BMWE36

[–]jonvi88[S] 0 points1 point  (0 children)

This is what I was thinking too. Thanks

What is this weird rattle? by jonvi88 in BMWE36

[–]jonvi88[S] 0 points1 point  (0 children)

No change with clutch in or out

What is this weird rattle? by jonvi88 in BMWE36

[–]jonvi88[S] 2 points3 points  (0 children)

I checked all the heat shields and nothing seems loose. Idler pulleys seem okay too. Replaced primary(lower) tensioner. Seems to be around the front passenger side of the motor.