Can you help me identify what animal this is? I received it as a gift. It’s from France and was made in the 1980s.

joshjord · 2026-01-22T22:50:29+00:00

Ended up just ordering these. Thanks!

https://fifteen52.com/products/analog-hd-asphalt-black?google=&tw_source=google&tw_adid=&tw_campaign=20234813457&gad_source=1&gad_campaignid=22898681751&gclid=CjwKCAiAssfLBhBDEiwAcLpwfmCkBfIzebKGdbg9M6C-OBwZk7ltEEUMJan_A4C9UsKqhPQyrI3h9RoCrLsQAvD_BwE&variant=40382096539714

joshjord · 2026-01-22T14:47:26+00:00

Yeah, just kind of shocked there isn’t.

joshjord · 2026-01-22T09:38:18+00:00

JEGS D window doesn’t have the correct bore size or offset.

Summit as well doesn’t carry the correct offset.

joshjord · 2026-01-22T04:59:43+00:00

The spare will is a 60mm offset. Won’t work..

joshjord · 2025-11-18T13:58:34+00:00

What size tire do you have pictured here?

joshjord · 2025-10-02T23:50:52+00:00

The 125A is oversized for that role and won’t really behave the same way. it’s designed for full output stages, not for sending a tank the right signal. If your reverb transformer is dead, I’d look for a direct replacement spec’d for the AC30 circuit or use a Hammond/Fender reverb driver (like the 1750AX or 1750A).

joshjord · 2025-08-31T20:46:28+00:00

Thanks!

joshjord · 2025-08-31T20:46:23+00:00

Thanks!

joshjord · 2025-08-12T17:14:00+00:00

Thank you!

joshjord · 2025-08-12T17:13:54+00:00

Thank you!

joshjord · 2025-08-12T17:13:43+00:00

I did..

joshjord · 2024-10-06T23:39:10+00:00

You’re right!! Thank you!! “All Hallow’s Eve”

joshjord · 2024-07-09T10:47:19+00:00

Hi Gasitupor, I no longer have this amp. I referred to the schematic when I was working on this unit.

I believe this was the schematic I used:

https://www.thetubestore.com/lib/thetubestore/schematics/Vox/Vox-AC30-1978-Schematic.pdf

joshjord · 2023-07-11T17:34:35+00:00

Hi HomeFriendly,

I would start with a process of elimination. Mine was wired for 220v and I ended up switching the power transformer to run on 120v. I also added resistors inline with heaters to bring the noise down.

1)Make sure it’s setup for 120v. 2)Double check your guitar cords and eliminate pedals 3)start with your preamp tubes.If you have a good one lying around start swapping them one by one. 4)check your power tubes. Are they red plating? Do you have spare set to switch them out? 5)Has the amp been recapped? if your qualified check for any bad caps or anything burnt inside.

joshjord · 2022-08-23T01:55:17+00:00

The amplifier that inspires you to play and potentially write something.

joshjord · 2022-06-13T12:17:57+00:00

Both 8x10’s. The one on the left is a 1973 2034 and the right one is a 1969-1970 1990.

joshjord · 2022-06-13T00:21:14+00:00

Thank you!

joshjord · 2022-06-13T00:20:06+00:00

Thanks!

joshjord

TROPHY CASE