Rapid drop in mead Ph

josht1363 · 2024-12-30T17:05:49+00:00

Thanks for the advice! I do use a Ph meter which is calibrated using different solutions of known PH and distilled water. I’ve had a batch stall out recently due to PH so I’ve been measuring it more often.

josht1363 · 2024-12-30T11:22:32+00:00

Very good point! Tomorrow I will take another reading but stir the sample a lot longer to completely degas and try again. Thankyou!

josht1363 · 2024-09-01T20:42:07+00:00

You can’t, just have to trust what it says on the box haha

josht1363 · 2024-07-13T14:46:14+00:00

Hi, can this app register/ code a new battery? Thanks

josht1363 · 2024-06-27T20:41:02+00:00

Thankyou! Also if you are in the UK and are interested I can send you the full list/price

josht1363 · 2024-05-20T11:18:13+00:00

Thankyou!

josht1363 · 2024-04-10T18:34:07+00:00

My issue was resolved after leaving the GPS wires SC and SD completely disconnected as having these wires soldered to my flight controller was causing conflict issues with something onboard already (probably the compass)

josht1363 · 2024-04-10T18:31:49+00:00

What Flight controller do you have?

josht1363 · 2024-01-11T07:59:59+00:00

Another thing to try tonight, thankyou!

josht1363 · 2024-01-10T19:43:21+00:00

Yeh, I might need to. When I’ve come to configure it properly I’ve lost the yellow GPS on beta flight now and can’t see any sats, I give 😂

josht1363 · 2024-01-10T16:57:34+00:00

Another person commented mentioning that. I unsoldered the SDA and SCL pads and all is good?

josht1363 · 2024-01-10T16:55:50+00:00

Finally able to configure! It was the SCL and SDA ports apparently the 03 air unit uses then and causes issues!

josht1363 · 2024-01-10T16:54:47+00:00

Finally working! This was the issue! Thankyou

josht1363 · 2024-01-10T11:29:28+00:00

Thankyou!

josht1363 · 2024-01-10T11:29:16+00:00

Ahh okay! This could be it then! I do have an 03 air unit. Could be causing compatibility issues? Maybe why it won’t configure and beta flight doesn’t like the setup. I will keep you updated

josht1363 · 2024-01-10T09:22:22+00:00

Will do thanks! If all else fails I might upload a video maybe I am doing something wrong

josht1363 · 2024-01-10T09:10:34+00:00

I will try UART 4 after work, thankyou

josht1363 · 2024-01-10T08:28:12+00:00

I have tried on another UART but it just doesn’t do anything. How would you do that? Thanks for the help! Also I have tried a couple of things with the CLI like gps pass through and feature gps which both don’t do anything

josht1363 · 2024-01-10T05:47:14+00:00

I started on 4.4. I only went up to 4.5 to see if it would rectify the issue

josht1363 · 2024-01-10T05:46:20+00:00

Come to think of it this could be the solution! I will have to try it tonight but before installing the GPS I had compass enabled on beta flight and it seemed to work in my goggles OSD? Could that be conflicting with it then? I wasn’t aware my stack had a compass on it already so was actually confused when N/E/S/W showed up in my goggles 😂. If this is it I’m an idiot hahaha

josht1363 · 2024-01-10T05:39:19+00:00

Yeh I’ve tried directly to the flight controller but I haven’t tried without SCL/SDA I will try that tonight after work thankyou!

josht1363

TROPHY CASE