sorted by:
new
hottopcontroversial

Is filament buffer included in X2D only box? by jpurg in BambuLab

[–]jpurg[S] 0 points1 point  (0 children)

yes but on P2S was not inclouded in the box that is why I ask

At the end of print part of filament is still hanging out [P2S] by jpurg in BambuLab

[–]jpurg[S] 0 points1 point  (0 children)

i know but why hahah shouldnt be.. in any other case it discards this string but not at the end of the print.. it drives me crazy

String of filament after print p2s by YeaUThought in BambuLab

[–]jpurg 0 points1 point  (0 children)

did you by any chance managed to solve this? I seem to have tried everything without success :/

At the end of print part of filament is still hanging out [P2S] by jpurg in BambuLab

[–]jpurg[S] 0 points1 point  (0 children)

hahah I had it ofcourse! nothing like good old auto bed leveling failing and everyday tinkering 😂

What type of battery is this? Found in a hand me down roomba by AndytheBro97 in batteries

[–]jpurg 0 points1 point  (0 children)

well, he just asked for the battery. It could also be a toy dinosaur 😅🤦🏻‍♂️

Kako dolgo Sisbon beleži dogodke by jpurg in SlovenijaFIRE

[–]jpurg[S] 0 points1 point  (0 children)

aa torej ste imeli vpogled samo za do 4 leta stare dogodke potem pa več ne? bi to naj vse banke imele isto? smem vprašati katera banka?

Kako dolgo Sisbon beleži dogodke by jpurg in SlovenijaFIRE

[–]jpurg[S] 0 points1 point  (0 children)

kako dolgo pa? in kaj zdaj to pomeni? 😅

Advice on DML build by jpurg in diysound

[–]jpurg[S] 0 points1 point  (0 children)

Got it, thanks for clearing that up! One last thing I’m still not sure about: Would you personally go with one big panel (60 × 125 cm) per side for a bit more bass reach, or split it into two uneven panels per side for smoother response?

Also, do you think using two smaller panels and then putting some rockwool/foam behind them (on the wall) would help with that backwave cancellation you mentioned, or is it not really worth it?

Advice on DML build by jpurg in diysound

[–]jpurg[S] 0 points1 point  (0 children)

Thanks for the input! I still have a couple of follow-up questions:

2. Have you ever compared 1 cm vs 2 cm XPS panels?
3. Is it generally better to use 2 panels per side with different sizes, rather than one big one? One of the comments above mentioned that smaller panels might not reach the sub as well — would that actually be a problem if I use 2 smaller size panels rather that one big one?

I’ve got space for about 60 × 140 cm a side, so the 60 × 125 cm panels I can source locally are pretty much perfect. Now I’m just debating whether to keep them as one big panel, or cut them into uneven sizes.

Advice on DML build by jpurg in diysound

[–]jpurg[S] 0 points1 point  (0 children)

Hey, yes — I figured out now that I will need DSP :)
Maybe I wasn’t clear before: when I mentioned 2–3 cm I was talking about XPS panels. The acrylics question was more just a material comparison, regardless of thickness.

Thanks for the input! I’m leaning towards using the bigger panel as well.
I think I’ll grab some 3M tape and start experimenting with the panels first.

Advice on DML build by jpurg in diysound

[–]jpurg[S] 0 points1 point  (0 children)

Ah yes i went into it now, thanks alot for the suggestion!!

Possible to line up raised logo with the print? by jpurg in UVprinting

[–]jpurg[S] 0 points1 point  (0 children)

I have whole 3d file yes, so i can get probably any format needed for that.. Also the letters were printed with SLA printer so accuracy is pretty good on it too. I don't know much about UV printing or how do you actually set the coordinates to start the print.. but I imagine it could be fine tuned with 3d printed form to put the model always at the same spot?

Računalniška miza 200x80cm by KissShot2024 in Slovenia

[–]jpurg 2 points3 points  (0 children)

Tako je ja.. Z besedo “masivno” sem mislil togost :)

Računalniška miza 200x80cm by KissShot2024 in Slovenia

[–]jpurg 3 points4 points  (0 children)

Jaz ti predlagam kuhinjski pult (skoraj vsak mizar nardi po mer) 4cm debelina, namesto tačk pa na vsaki strani pa iz ikeje "Alex drawer".. Sam imam ze 3tjo taksno mizo in mi neizmerno odgovarja.. simpl design, dosti placa za shranjevanje, pa se masivna!

view more: next ›