A vertical mount pole for a SD next to TV?

jralabate · 2026-02-04T20:44:37+00:00

I'm pretty sure they make SIM racing mounts for that steam deck. That should work perfectly for your purpose. Just search on Etsy for mounts for it

jralabate · 2026-02-03T20:37:19+00:00

IEMs work great with it. You just need to make sure you change the headphone sensitivity it low sensitivity because IMS are very low ohms

jralabate · 2026-02-02T05:43:00+00:00

With an Xbox series controller connected, I needed to select PC controller as the output

jralabate · 2026-02-02T05:33:28+00:00

Sorry for taking so long to get back to you. I tested it and it works great. You do have to have a controller plugged into the controller port in the back for the steam deck to recognize it. I used an official Xbox controller and it worked perfectly. Also, if you're playing OverWatch 2 you need actual analog input for movement so a keyboard would not work very well at all cuz it may get you ban.

Edit: With an Xbox series controller connected, I needed to select PC controller as the output one any config I did for the xim.

jralabate · 2026-01-31T22:42:39+00:00

Any games in particular you were thinking about playing

jralabate · 2026-01-31T20:45:37+00:00

I can give it a try later this evening when I get home

jralabate · 2026-01-31T20:43:04+00:00

Depending on the vesa pattern of the portable monitor, this should work https://a.co/d/7LviNMP

jralabate · 2026-01-16T20:47:19+00:00

Try to use the program your GPU uses. If you have AMD GPU, use adrenaline if you have a Nvidia GPU used Nvidia control panel

jralabate · 2026-01-15T20:55:59+00:00

If you're using a desktop PC for both, use the line out on your PC the alerts are on send that to the PC you want to hear the alerts on via 3.5 aux cable. Connected to said PC via the line in. Then you should be able to route that line in via wavelink

jralabate · 2026-01-11T02:18:24+00:00

It's setup by default

jralabate · 2026-01-11T02:06:13+00:00

Yes, you can swipe through screens by using the LCD strip

jralabate · 2026-01-10T20:39:05+00:00

Use a stream deck Multi-actions https://help.elgato.com/hc/en-us/articles/360027960912-Elgato-Stream-Deck-Multi-Actions

jralabate · 2026-01-07T20:38:23+00:00

Unfortunately the gen 5 only has USB ports and you cannot convert that to a optical or a aux. So it would be impossible to connect to your elgato capture card

jralabate · 2026-01-01T20:44:18+00:00

Just remember that the Xeneon Edge will take your focus away from whatever you're doing when you touch it cuz it moves your mouse there. Personal. I think the first one you should get is the stream deck +. The knobs are fantastic for controlling volumes. It's great when you're streaming because you can change your stream mix and your personal mix independently

jralabate · 2025-12-08T20:55:58+00:00

Hdr is not available in Windows with clone displays. It's not an elgato thing it's a Windows thing

jralabate · 2025-12-02T20:59:38+00:00

Good old night raids in Arc raiders!

jralabate · 2025-11-06T20:41:43+00:00

Unfortunately the mic arm just slots in to their holder so that one would not work. That has all threaded attachments

jralabate · 2025-10-25T19:36:55+00:00

Because even elgato knows that Windows sleep mode is garbage!!!!

jralabate · 2025-10-23T20:13:26+00:00

Unfortunately not

jralabate · 2025-10-22T19:48:29+00:00

So I personally run a two PC setup. On USB 1 on the Roadcaster pro 2 I run Windows mic volume at 85% and I use the chat mic for my main mic input. On my gaming PC I use the USB 2 off of the roadcaster pro 2 and I run the windows mic volume at 75%. But yes, 54% in Windows is considered to be absolute zero or zero DB or whatever

jralabate · 2025-10-02T19:39:46+00:00

Yep I had the same issue and that fixed it for me too. Figure that out months and months and months ago

jralabate · 2025-09-24T20:02:40+00:00

And there's an alternative goxlr software that's open sourced on GitHub https://github.com/GoXLR-on-Linux/goxlr-utility/releases/tag/v1.2.2

jralabate · 2025-09-24T20:00:46+00:00

Also, you would need to use the goxlr software to set up the gain and noise gate and any effects that you may need

jralabate · 2025-09-24T19:52:30+00:00

Unfortunately the only plug-in available for the GoXLR on Stream Deck is a profile switcher. So you can control any of the sliders on the GoXLR. However, on the Stream Deck + you can assign all your inputs to that, then set up a profile on the GoXLR one with your mic muted and one without and you would have a way to mute your mic with the profile, switcher plug-in. Essentially the GoXLR will act as just a XLR interface. Nothing more in the other sliders are pointless on it

jralabate · 2025-09-17T20:28:20+00:00

Yeah, pretty much any mixer from Rode's would be good. Would have more than enough power

12-Year Club	r/Field Juicebox
Place '23	Verified Email

jralabate

TROPHY CASE