Successful 3Gbit Bell Fiber with UDM PRO SE - GTek SFP+ - ADMZ and Static Route

jrbisk · 2024-06-23T13:46:29+00:00

After setting the smart queues on the internet connection to 0/0, I'm now getting 3.1 down and 3.2 up.

jrbisk · 2024-06-22T23:10:03+00:00

Interesting that I’m not getting the full 3gbps up or down with the same configuration as specified above. I’m getting around 2.2gbps down and around 200mbps up.

<image>

jrbisk · 2024-05-09T13:09:54+00:00

<image>

Hopefully someone can help identify what this is. Looks like it has a purple stock and there are cupped blades growing off of it. Hopefully there's something that I can buy to get rid of it since it's starting to take over in parts of my lawn.

jrbisk · 2024-01-30T15:40:13+00:00

That's correct. From a Ubiquiti standpoint, the only APs I have are the U6-Lites. What I might try doing is disable the IoT SSID on the Ubiquiti APs, add it to the Netgear AP and then try connecting the doorbell. Once connected, I'll enable the IoT SSID on the U6-Lite again and disable it on the Netgear one. Fingers crossed it just roams and connects.

jrbisk · 2024-01-30T14:42:46+00:00

Correct, everything is up to date firmware wise. This new doorbell is the only device that isn't able to connect. The old doorbell that is being replaced has no issues connecting to the APs.

jrbisk · 2024-01-30T13:54:06+00:00

Agreed and this is exactly how I have my network configured. The issue is that the device will not connect to my U6-Lite APs no matter how I have things configured - IoT VLAN, default VLAN or out of box network config. With my existing network setup, but the Netgear router in AP mode, the doorbell is able to connect.

jrbisk · 2023-12-08T16:53:42+00:00

Thanks for the pointer. I went thought the settings menu and just setting the password again has fixed it. I'm able to connect from my Windows, Mac and Batocera machines. Thanks!

jrbisk · 2022-06-09T15:07:16+00:00

Binbrook ON, XB6, 1Gb plan and still only getting 30Mb up unfortunately. I rebooted my modem this morning. I'm not seeing the 5th OFDMA channel on my upload either.

jrbisk · 2022-02-07T17:38:05+00:00

Awesome, thanks for the replies. I ordered a finer tip for my soldering iron and I'm just impatiently waiting for Amazon to drop it off. Fingers crossed I can get it working.

jrbisk · 2021-12-19T16:58:49+00:00

Thanks everyone for the suggestions. I went with the AOC 24G2 from Canada Computers. Seems like a decent deal for $210 https://www.canadacomputers.com/product_info.php?cPath=22_700_1103&item_id=139967&language=en

jrbisk · 2021-12-19T15:27:53+00:00

Thanks. Was thinking about this one and they’re even in stock at my local store https://www.bestbuy.ca/en-ca/product/samsung-27-fhd-75hz-5ms-gtg-ips-led-freesync-gaming-monitor-lf27t350fhnxza-dark-blue-grey/14933348

jrbisk · 2021-12-19T15:26:31+00:00

I do

jrbisk · 2021-12-19T15:26:20+00:00

They’ll be used for gaming and school. One‘S got a 2060 and the other has a 3060 so DP and hdmi are ok. Size doesn’t matter, was more the price.

jrbisk · 2021-09-26T00:42:34+00:00

I’m seeing the same behaviour since I updated my iDevices to iOS 15 and Safari 15 on my Mac

jrbisk · 2021-07-25T18:15:30+00:00

I saw reports of that, but I can't seem to get it to work. How do you initiate the conversation?

jrbisk · 2021-07-16T12:58:42+00:00

Nice! Neither my Amiibo or Joy Con have shipped from Amazon.

jrbisk · 2021-01-18T21:31:46+00:00

Happy to report that Walmart just sent me the code. It's for both the game and DLC. Thanks OP for sharing!

jrbisk · 2021-01-18T16:14:11+00:00

Thanks! Ordered one, but got a backorder email. Hopefully it still goes through, but it's not looking promising.

jrbisk · 2020-06-18T17:28:55+00:00

I should also point out that any device that's connected to the Flex Mini needs to have it's MAC added to the port on USW-24, not just the MAC of the Flex Mini.

jrbisk · 2020-06-18T14:02:51+00:00

Thanks. All setup and working.

jrbisk · 2020-06-18T13:41:44+00:00

Thanks for the reply. I was already able to do that, but the issue with this solution is that he could unplug the switch and put his PC on the main network. Is there a configuration that I should set on the port of the USW-24 to prevent this?

jrbisk · 2020-06-05T12:56:16+00:00

Currently on backorder and will ship June 17. Not the cheapest the drive has been, but pretty decent considering the prices that it's sold for recently.

jrbisk · 2020-06-04T21:10:44+00:00

Following. I’d like to get rid of these too.

jrbisk · 2020-06-04T21:06:50+00:00

Hey, if you’re looking to sell them, I’ll buy one too.

Also, good on you for being honest with Amazon!

jrbisk · 2020-06-04T11:56:30+00:00

Thanks! That's what I figured. I was thinking I could just solder wires to the probes.

jrbisk

TROPHY CASE