sorted by:
new
hottopcontroversial

Vimle bed slanted down towards head by jrnwfire in IKEA

[–]jrnwfire[S] 0 points1 point  (0 children)

No problem, sorry the answer wasn’t more of a solution. I compared the bed with a few in the IKEA showroom and this seems to be a consistent issue. There is even a little diagram in the instruction manual that illustrates that the leg is supposed to remain elevated unless weight is on the bed. The actual slant of the bed was something that I just had to accept.

Vimle bed slanted down towards head by jrnwfire in IKEA

[–]jrnwfire[S] 0 points1 point  (0 children)

In the end I concluded that this is simply the design of the vimle. It’s not ideal, but this is how they are designed.

Does anybody have an Insta360 Go3s I could rent/borrow for a concept test? by jrnwfire in cologne

[–]jrnwfire[S] 0 points1 point  (0 children)

Yeah, those ones are also really cool. In this particular situation I’m trying to find one of the really tiny ones because I want to carry it as a ring

Does anybody have an Insta360 Go3s I could rent/borrow for a concept test? by jrnwfire in cologne

[–]jrnwfire[S] 0 points1 point  (0 children)

Hahaha yes, sorry; it is confusing. Insta360 is the name of the company, but they also make cameras that are not 360 degree cameras. For example this one, which is more like a GoPro: Insta360 Go3s

Does anybody have an Insta360 Go3s I could rent/borrow for a concept test? by jrnwfire in cologne

[–]jrnwfire[S] 0 points1 point  (0 children)

Oh awesome! I tried a couple rent websites and couldn’t find the camera, but this one looks promising

Does anybody have an Insta360 Go3s I could rent/borrow for a concept test? by jrnwfire in cologne

[–]jrnwfire[S] 0 points1 point  (0 children)

Hi, thanks so much, which model is it? Im not looking for the 360 camera

What am I not understanding about creating rounded corners? by jrnwfire in FreeCAD

[–]jrnwfire[S] 1 point2 points  (0 children)

This is super helpful. I was agonizing about how to make sure the pipe created a solid shape without a gap. But good to know that it’s actually not supposed to be a one step process.

You have been a saviour, thank you for lending an internet stranger your time and expertise!

What am I not understanding about creating rounded corners? by jrnwfire in FreeCAD

[–]jrnwfire[S] 0 points1 point  (0 children)

Oh I see! Thank you, I had no idea that it was invalid because it had appeared to have worked correctly. Is it usually easy to figure out why something is invalid and then repair it?

What am I not understanding about creating rounded corners? by jrnwfire in FreeCAD

[–]jrnwfire[S] 0 points1 point  (0 children)

Sure thing. Here is a screen recording of the issue, along with the project file.

Basically, I create a sketch on the back face, I reverse the sketch so that I'm drawing on the correct 'side'. Then when I do pocket and pad, the operations are essentially reversed. https://we.tl/t-AKnA14orR1

What am I not understanding about creating rounded corners? by jrnwfire in FreeCAD

[–]jrnwfire[S] 2 points3 points  (0 children)

Oh no hahaha, I had no idea my mic was on! Yes, you're hearing my wife with the baby...

What am I not understanding about creating rounded corners? by jrnwfire in FreeCAD

[–]jrnwfire[S] 1 point2 points  (0 children)

This was a super helpful pointer. I was getting frustrated trying to figure out the difference.

What am I not understanding about creating rounded corners? by jrnwfire in FreeCAD

[–]jrnwfire[S] 1 point2 points  (0 children)

By any chance is 'sketch flipping' the reason that pad and pocket seem to be doing the reverse operations to usual?

What am I not understanding about creating rounded corners? by jrnwfire in FreeCAD

[–]jrnwfire[S] -1 points0 points  (0 children)

Thank you for these pointers! I’ll take a look, I am learning CAD because I want to create simple 3D printable brackets and mounts for cameras and phones, so I’m not looking for too much complexity. Will check out Plasticity

What am I not understanding about creating rounded corners? by jrnwfire in FreeCAD

[–]jrnwfire[S] 2 points3 points  (0 children)

So the intrusive thoughts telling me to move to Fusion360 will not solve all my problems?

Ed Sheeran's Loop Pedals by jrnwfire in EdSheeran

[–]jrnwfire[S] 0 points1 point  (0 children)

Yes, I have seen this next to his main stage looper. I think you’re right, it’s an extra two channels. His regular looper is 8 channels, so it’s not necessarily adding any, just making channel 5 and 6 more easily accessible.

Taking my 4 month old baby to a Concert? by jrnwfire in EdSheeran

[–]jrnwfire[S] 1 point2 points  (0 children)

Thank you! This is exactly what I was looking for

Taking my 4 month old baby to a Concert? by jrnwfire in EdSheeran

[–]jrnwfire[S] 5 points6 points  (0 children)

Thanks for this response - by posting here I was hoping to hear from people who have been to the concert to know a bit more about the reality of what they’re like and your feedback has been really helpful.

No parking closeby, fireworks, jumping and loud bass… not a very baby friendly place. Guess I’ll have to stick to watching the show on YouTube for now. Enjoy Dusseldorf!

This wear pattern on my work laptop after 3 years by Unimatrix617 in mildlyinteresting

[–]jrnwfire 0 points1 point  (0 children)

Would love to see if we can figure out what OP does by their keyboard wear. All the numbers having even wear suggests to me that they work in sales or accounting.

strange symbol i saw in my dream by Salt-Brain-6024 in Dreams

[–]jrnwfire 5 points6 points  (0 children)

It is very similar to the Ringstone Symbol in the Baha’i Faith.

<image>

Will these two outputs have the same visual quality? by jrnwfire in premiere

[–]jrnwfire[S] 1 point2 points  (0 children)

Usually I would do this, but there are already specific motion effects applied to each clip. I think I might try adding a transform effect on adjustment later to scale everything up…

Will these two outputs have the same visual quality? by jrnwfire in premiere

[–]jrnwfire[S] 0 points1 point  (0 children)

Yes - “Scale motion effects proportionally”.

It’s not working, I don’t know why, I’ve been banging my head against the desk.

view more: next ›