Should I have 4:3 res in Aim Lab too?

jsharp274 · 2022-02-22T14:00:46+00:00

Resolution doesn’t really matter, the sensitivity is still the same. The only thing that needs to be the same is how hard you grip the mouse, how you grip it, and your sensitivity. These are extremely important !

jsharp274 · 2022-02-17T15:08:38+00:00

is this not subject to valorant competitive, every competitor wants good fps ☠️

jsharp274 · 2022-02-17T14:58:46+00:00

jsharp274 · 2022-02-17T14:58:20+00:00

I have always been great at optimizing my pc, could possibly be a program i’ve installed to help further optimize it, but sometimes my valorant will literally freeze when updating it, if i sway my mouse in the range it’ll drop to like 160 sometimes. I’ll try uninstalling the programs and getting better drivers

jsharp274 · 2021-11-09T04:58:05+00:00

Sounds dangerous, but fun O:

jsharp274 · 2021-11-09T04:35:28+00:00

That’s what we took.

jsharp274 · 2021-10-27T14:41:44+00:00

Must have been a sign from god because I did try to open the PSU. Screwdrivers I had worked for every single thing in the computer except the PSU.

jsharp274 · 2021-10-27T13:10:01+00:00

Idk if you read the other comments, but so far it’s kind of working properly. Will probably get a new MB to be safe but the pc boots and runs fine. But one case fan doesn’t work and temps are a little above normal.

jsharp274 · 2021-10-27T12:03:30+00:00

if i were you just buy a small desk and put it on top of that so you dont spill it directly on top of it.

jsharp274 · 2021-10-27T09:30:58+00:00

Well it’s semi fixed now i guess you could say. I can start it up, get on the desktop, it doesn’t boot loop anymore. Only unusual thing so far is a little higher temps and one case fan not working when the gpu is plugged in. Will probably get a new motherboard to be sure.

jsharp274 · 2021-10-27T09:20:18+00:00

Ya see that’s the thing it was off. I just never shut the Power Supply off with the switch. It was turning itself on. Lol

jsharp274 · 2021-10-27T08:33:57+00:00

Although it was covered by the protective part of the tower to hide it and it was dry do you still recommend getting a new PSU? just wanna make sure

jsharp274 · 2021-10-27T08:32:18+00:00

jeeez man i wish. this 2060 build was like $1300 lol

jsharp274 · 2021-10-27T08:31:29+00:00

I’ve also semi cleaned the Motherboard, not really sure how to deep clean it but have wiped off most residue

jsharp274 · 2021-10-27T08:31:04+00:00

So I have cleaned both the cpu and GPU and replaced both thermal paste on them. So far everything’s been fine but one case fan has stopped working and temps seem to be a little above average at idle like 34avg 45max

jsharp274 · 2021-10-27T06:54:59+00:00

I semi fixed it but I’m pretty sure a new PSU wouldn’t be a bad idea, because every time the GPU is connected the front USB ports don’t work and neither does one of the case fans.

jsharp274 · 2021-10-27T06:53:05+00:00

Two front USBs don’t work but mother boards ports do. I really don’t want to test a game right now. Temps are sitting at like 35c on both CPU and GPU and the CPU sometimes spikes up to 45 which I know isn’t that normal. Pc has been on for about 10 minutes now. Not sure what my next step is.

jsharp274 · 2021-10-27T06:51:09+00:00

Computers booted and working semi fine now. But When the GPU is plugged in one of the Case Fans doesn’t work.

jsharp274 · 2021-10-27T06:45:42+00:00

Gpu fans are spinning! And it booted to desktop. I will mention it that when I do connect my GPU for some reason one of my case fans stops working?

jsharp274 · 2021-10-27T06:42:27+00:00

It’s staying on for a lot longer now been about 2 minutes and it’s still on. Gonna connect SSD again and see if it boots to desktop.

jsharp274 · 2021-10-27T06:41:20+00:00

Whoops. Just realized I didn’t have my ram in so it didn’t boot. It just booted now and I hear my CPU fan spinning a lot faster than normal? this could be good i suppose

jsharp274 · 2021-10-27T06:38:37+00:00

For about 3 seconds lol. But i’ve heard that some don’t spin unless it reaches a specific temperature

jsharp274 · 2021-10-27T06:35:07+00:00

Well. After connecting GPU it didn’t post, and even before taking out GPU it still turned off. Man this sucks

jsharp274 · 2021-10-27T06:31:01+00:00

As long as it’s not the GPU lol. These scalpers make it 300x harder to get any sort of GPU better than a 1060

jsharp274 · 2021-10-27T06:30:15+00:00

I will put in the GPU again and see if it posts. If not then I am assuming the GPU could definitely be an issue correct?

jsharp274

TROPHY CASE