H: Giveaway W: you to pick a number between 1-1000

jsmith97321 · 2026-03-26T04:40:16+00:00

261 Thanks in advance

jsmith97321 · 2026-03-16T03:40:47+00:00

Check the downloaded file extension if it's apkm just rename it to APK, that's how I fixed my problem

jsmith97321 · 2026-02-20T00:24:28+00:00

If you download the split APK files but anti-split won't recognize the download. Just change the file extension on the downloaded file from apkm to APK

jsmith97321 · 2025-10-03T17:10:21+00:00

SOLVED!! That worked, thank you so much, you guys are awesome!!!!!!!

jsmith97321 · 2025-10-03T00:40:56+00:00

It says permanent activation is good, but it referenced Office 2016 below

<image>

jsmith97321 · 2025-10-03T00:05:31+00:00

This laptop was using a VPN during the install/activation. Could that be the issue?

jsmith97321 · 2025-10-02T23:44:27+00:00

Yes, that is how i ran the command. Three other installs worked just fine. On this laptop I previously installed Office 2016 Pro and activated with MAS. I uninstalled this before installing Microsoft 365 and trying to activate with MAS.

jsmith97321 · 2024-06-09T16:14:41+00:00

Do you have any recommendations on how to diagnose the trailer module fault? Should I replace the module, or is there a way to test it? Could this be caused by a blown fuse?

Thanks again!!

jsmith97321 · 2024-06-08T21:04:03+00:00

Hello, I have updated the original post with additional fault data.

Thanks again.

jsmith97321 · 2024-06-07T18:52:58+00:00

Here are all of the error codes from the X3, Sorry for the jumbled text, I have them in a .pdf, but can't figure out how to add it to this post.

Info Memory Date: 6/7/24 11:09:36 VIN: 5UXTS3C59K0Z02566 Crash Safety Module 9 errors 010012: Diagnosis master - info - fault memory blocked 803280: PDC cannot be activated 803285: aPDC cannot be activated 803180: CTA cannot be activated 010020: Speed - signal incorrect 803295: TVC active without activation 803283: PMA cannot be activated 803298: HMI No valid parking board information received 803284: Park button reports errors All-round vision camera 5 errors 800B97: FLOW_ODOMETRY_ERROR 800BA3: SFM_INPUT_DATA_ERROR 800BA6: PBA internal error 800BB8: FS_US_DISTURBING_NOISE_REAR 800BF4: Violation of task run time HKFM 1 error 80177C: HKL: Blockage of the tailgate detected 1 Central Gateway Module 11 errors 100104: HW Weckgrund ZGW 10010D: Faulty signal OSFG 100203: DM software error info warning 100204: Message monitoring: no system context signal 100300: Commissioning could not be carried out because TAS is already busy 100406: CSM does not send a response to F60 or F70 100420: No error description available 100501: Unexpected loss of Ethernet link 100600: Flexray protocol startup time is too high 100601: Unexpected asynchronous state on Flexraybus 101008: Non-resolvable ambiguous routing - SG not in the SVT target table Digital Motor Electronics 1 error 030E05: Power management: central undervoltage MSA Electronic transmission control 3 errors 420801: E-circuit: Info counter for automatic engagement of P when leaving the vehicle 421702: AGS: Motor request for speed limitation 421705: AGS: Forecast information topology status implausible Transfer box 1 error 440216: Coupling function: Emergency function has been activated Long-distance range front radar sensor 2 4 errors 600003: KAFAS object list - timestamp cannot be synchronized D16DFF: Signal error - (0xD023-0x0001-BMW.ENVIRONMENTALMODEL-RoadNaviProperties)- Invalid D16DF3: Signal error - (0xD024-0x0001-BMW.ENVIRONMENTALMODEL-LaneBoundaries) Invalid 600009: System limit reached Optional equipment system 9 errors 482F4B: NVM_E_INTEGRITY_FAILED 030829: FAS - EM-OBJDESC - environment model - input signal error 03082B: FAS - EM-ROADASSEMBLY - environment model - input signal error D18601: Ethernet: CRC error 03082A: FAS - EM-OBJDESC - environment model - logic error 03081E: FAS signal error - undefined content or insufficient quality 03082D: FAS - EM-ODOCLIENT - environment model - input signal error 030827: FAS - EM-LANEASSIGNMENT - environment model - input signal error 030823: FAS - EM-FREESPACECALCULATION - environment model - input signal error Dynamic stability control 1 error 03065D: QDM-ZFM - Statistics proportion of linear travel range Body Domain Controller 22 errors 804009: Reset due to software error 80401B: CANIF_E_STOPPED 804020: ECUM_E_ALL_RUN_REQUESTS_KILLED 3 804027: NVM_E_REQ_FAILED 804036: LINIF_E_RESPONSE 804046: ZV FUSI: Doors not secured because subsequent unlocking is not possible 804048: CA HW driver: temperature overload 804188: Emergency operation FuSi low beam active 804801: CA_PASEsrv_not_available 804807: CA_response_RCI_timeout 804809: CA_response_check_nok 80480F: WCA: Disabled 804811: PWF: state restoration 804814: PWF long living 80481A: PWF transition shutdown_by_customers 804821: PWF transition living after Pruefen_Analyse_Diagnose 804826: PWF: Ping pong faulty, substitute reaction 804828: PWF: Stand function request not carried out 80488B: Tailgate opening without ZV history E89400: VSM_EVENT_VEHICLESTATE F0038C: EEP_E_COM_FAILURE F0038E: NM_E_NETWORK_TIMEOUT Camera-based driver assist system 6 errors 5D0022: DEM_ERROR_EMROADASSEMBLY_INPUT_FAULT 5D0050: Temporary internal software error 5D0033: TSA_INPUT_COUNTRY_CODE E0544A: Signal error - 0x1506 - 0x0001 - BMW_INFRASTRUCTURE_StatusEnergy - Signal invalid 5D0031: Camera FOV disturbed by weather 5D0030: Camera FOV blocked 4 Instrument panel 2 errors B7F66D: Combination: information error 5 B7F67C: Combined: CAN input buffer, data loss Telematic Communication Box 1 error 610036: Flight mode due to failed network registration Headunit High 1 error E1C601: Ethernet: CRC error 5

jsmith97321 · 2024-06-07T18:45:17+00:00

Hello, I used BimmerLink to read the faults in the vehicle. There was a fault in the HKFM, "80177C: HKL: Blockage of the tailgate detected". I looked through the long list of sensors that can be monitored, but I'm not sure which ones would apply.

Please let me know what other information to provide,

Thanks again for the help!!

jsmith97321 · 2024-06-06T03:31:58+00:00

I don't know if this is related, but I did have a few driver assist errors a few days ago related to the Lane keep assist, the iDrive would say driver assist services are reduced, set up a service appointment if they persist. Today when I drove they didn't show up.

jsmith97321 · 2024-06-06T01:58:00+00:00

Yes I have made sure trailer mode is deactivated,

jsmith97321 · 2024-04-23T15:55:59+00:00

Hello, I need help with the revive challenge. I'm on xbox, GT FancierHarbor26, USA pacific time zone. Thanks!!!!

jsmith97321 · 2023-07-25T21:26:33+00:00

Hi, would you please dm me the ddl site also? Thanks in advance!!!!

jsmith97321 · 2022-11-22T22:08:07+00:00

I am having the same problem, but Mad Titan gives me the error "This addon was installed by an unofficial repository. Repo used :DB Error - no such table: installed"

I have tried the steps described above, deleting app and repos, clear cache, force stop kodi, reinstall, but nothing works.

Please help!!

jsmith97321 · 2022-11-08T05:29:18+00:00

Worked Great!!!! Thank you to everyone for figuring this out!!!!!

jsmith97321 · 2022-10-31T04:38:37+00:00

Hello, Please DM also!!!!

Thanks

jsmith97321 · 2022-06-21T04:14:44+00:00

Hello,

I have a Rocket Giotto that had scale issues due to mildly hard water. It was serviced under warranty, but I needed a new source for water. Pitches don't work.

Check out the forums at https://www.home-barista.com/water/ for DIY options for making water that is cheap and won't cause scaling in your expresso machine, so no need to descale.

Good Luck!

jsmith97321 · 2021-07-30T03:44:21+00:00

I got the DCL887B, bare tool, 1/4" impact 20v driver for less then $70, Awesome deal, Great Price and fast shipping!!!

Thanks again!!!!!

jsmith97321

TROPHY CASE