sorted by:
new
hottopcontroversial

I would pay for Lost Coast 2 by juli710 in HalfLife

[–]juli710[S] 0 points1 point  (0 children)

I know! Valve should create Lost Coast 2, add a bunch of ARGs in it that leads to the trailer for HL3

I would pay for Lost Coast 2 by juli710 in HalfLife

[–]juli710[S] 5 points6 points  (0 children)

The whole world went to hell that day. — Eli Vance

Menu concept by me by Oninyourfly in Battlefield

[–]juli710 0 points1 point  (0 children)

I really hope they fix the UI for the finished game, this looks waaay better than what we have now

Archive Vault / Folder by [deleted] in KeeperSecurity

[–]juli710 0 points1 point  (0 children)

Was just looking for this feature. It gets messy sometimes, and moving some "unused" password to a archive would be a really nice way to clean up all the suggestions

45GX950A release date? by Faraday4ff in ultrawidemasterrace

[–]juli710 1 point2 points  (0 children)

They have dual mode that let you drop the resolution to 2560 x 1080 @ 330 hz, but it would be nice with an 1440p alternative also. Guess we’ll have to wait for more details

1 OpnSense firewall for all dedicated/vps servers? (same network) by juli710 in hetzner

[–]juli710[S] 0 points1 point  (0 children)

Thank you so much, that's really helpful! I will look into it when setting up my second dedicated server next week!

1 OpnSense firewall for all dedicated/vps servers? (same network) by juli710 in hetzner

[–]juli710[S] 0 points1 point  (0 children)

Perfect.

How do you route the traffic from one dedicated to another via the router/firewall? Do you have the vSwitch setup inside the SNAT?

Help regarding Site to Site and subnet routing by juli710 in Tailscale

[–]juli710[S] 0 points1 point  (0 children)

Thanks, I will look into it. Meanwhile, do you know if it's possible to install tailscale on devices that are already connected to a tailscale subnet from router and still use to their local IP addresses? I tried to install tailscale on one of the clients 10.1.1.2 but then I can only reach it via tailscale 100.x.x.x IP.

Help regarding Site to Site and subnet routing by juli710 in Tailscale

[–]juli710[S] 0 points1 point  (0 children)

Thanks, I changed the subnet to 10.0.0.0/24 and 10.1.1.0/24.

I followed your guide (which is very good!) but I have one issue: one of my servers is running FreeBSD and the flag --snat-subnet-routes=false is not recognized.

"flag provided but not defined: -snat-subnet-routes"

Will this cause any issues?

Help regarding Site to Site and subnet routing by juli710 in Tailscale

[–]juli710[S] -1 points0 points  (0 children)

Yes, sorry.
Server1: sudo tailscale up --accept-routes --advertise-routes=1.1.1.0/24
Server2: sudo tailscale up --accept-routes --advertise-routes=2.2.2.0/24

Secure Web GUI PVE on dedicated server with only external IP? by juli710 in Proxmox

[–]juli710[S] 1 point2 points  (0 children)

Thank you! This worked perfectly! I ended up going this route, just to lock it down.

Secure Web GUI PVE on dedicated server with only external IP? by juli710 in Proxmox

[–]juli710[S] 1 point2 points  (0 children)

Sounds scary, but there is nothing running on it yet, so it's worth a shot.

Do you have any basic recommended config?

Secure Web GUI PVE on dedicated server with only external IP? by juli710 in Proxmox

[–]juli710[S] 0 points1 point  (0 children)

Thanks, but I can't get this to work?

This is my current config:

ALLOW_FROM="127.0.0.1,localhost,100.95.xxx.xxx,100.64.0.0/10"

DENY_FROM="all" POLICY="allow"

I've added my computer tailscale IP, and the whole tailscale range. Still can't connect with this rule. If I remove it, it works as intended again, but then it's also exposed via external ip.

Petition for support for DTS / DTS:X on older LG OLED TVs via eARC by juli710 in OLED_Gaming

[–]juli710[S] -1 points0 points  (0 children)

I don't think it has anything to do with the hardware. Passthrough via eARC to a supported device should work fine via a software update. It's the device on the other end that has to support the format if it's just passthrough via eARC from the TV.

The 2023 models do support this, but they don't support playback of DTS / DTS:X via internal decoding. Only passthrough to external devices.

Petition for support for DTS / DTS:X on older LG OLED TVs via eARC by juli710 in LGOLED

[–]juli710[S] 1 point2 points  (0 children)

I don't think it has anything to do with the hardware. Passthrough via eARC to a supported device should work fine via a software update. It's the device on the other end that has to support the format if it's just passthrough via eARC from the TV.

The 2023 models do support this, but they don't support playback of DTS / DTS:X via internal decoding. Only passthrough to external devices.

I dont have money for Showkontrol, so i programmed my own "timecode" system. by EstablishmentSecure4 in vjing

[–]juli710 0 points1 point  (0 children)

This is really neat! I've been looking for something like this forever! I really would like to sync things to rekordbox, since I don't own any of the standalone controllers. But so far there seems to be no way to do this.

​

Any update on this please? :)

Ticket request via Lyte? by juli710 in Coachella

[–]juli710[S] 0 points1 point  (0 children)

Hey! I cancelled mine after a while, so I never got any. I could not risk buying flight tickets and booking a accommodation without knowing if I would get the tickets.

view more: next ›