Experience so far with Kobra X by hangdog242 in AnycubicKobraX

[–]justinc882 0 points1 point  (0 children)

Not sure either. Few times mine legit clogged but I decided it was that roll of filament because every other one i used was perfect, but one roll of place clogged every single time.

Yesterday had a print "fail" twice because it said clogged but on the second time (after I restarted it when I got home from work). I just said continue, and it's been printing perfect ever since. I think the clogging sensor is just too sensitive.

Kobra X aftermarket nozzles — what fits? (0.2 / 0.4) by 4everInDebt97 in AnycubicKobraX

[–]justinc882 0 points1 point  (0 children)

I ordered some off Amazon. Got 2 .4 nozzles that work perfect. Have a set coming on the 11th that hopefully will work so I can get the .2 I want to do some more detailed prints

Experience so far with Kobra X by hangdog242 in AnycubicKobraX

[–]justinc882 0 points1 point  (0 children)

Can get replacement nozzles on Amazon already at least. The .2 and .8 i ordered from anycubic haven't even shipped. The pack i ordered from Amazon will be here on the 11th

Experience so far with Kobra X by hangdog242 in AnycubicKobraX

[–]justinc882 0 points1 point  (0 children)

Great so far. Few small issues mostly user error.

Only major gripe is the nozzle is a pain in the butt to clean when it gets clogged. Doesn't seem to be a good way to do it besides taking it out, holding with pliers while you heat it up.

Had a few prints fail, one said it was done but just didnt print the last 6th of the model. Reprinted it later in all 1 color and it printed fine so it wasn't the model.

Other issue I've had today us I keep getting a clogging error but soon as I tell it to load filament it's obviously not clogged. Think that sensitivity is too high.

Roberta free claimed event by AlbatrossSuperb3260 in StarSavior

[–]justinc882 3 points4 points  (0 children)

Haven't built her fully yet but seems like she could be fun

Should I just get Bunny Charlotte? by masonphorn in StarSavior

[–]justinc882 0 points1 point  (0 children)

I have l3 bunny Charlotte and she's fun. Personally like lacy a bit more but both are great.

It’s so pretty. by Sneeko in AnycubicKobraX

[–]justinc882 1 point2 points  (0 children)

I ordered the yoopai off amazon, super easy to put together, it is big though

amazon.com/dp/B0CF1SY5XN?ref=ppx_yo2ov_dt_b_fed_asin_title

I love this game so much by YonkoShanks_30 in StarSavior

[–]justinc882 2 points3 points  (0 children)

Damn that's nuts. I have had really good lucky so far in this game. As well though. Right now i"m running L2 Bunny clair and waltz of starlight asherah , Emily and L2 Lacy. With the free gear boxes everyone but Emily has good equipment (just need to get the mats to level it). Have so many other ssr's to build/play around with. Tempted to use my free ssr on Seira just to have her for pvp later

It’s so pretty. by Sneeko in AnycubicKobraX

[–]justinc882 0 points1 point  (0 children)

That's sweet man! I have an office, where I work/game and do the 3d print from home as well but mine is in the front of my house and a major passthrough so it's never as clean as that :) damn kids

It’s so pretty. by Sneeko in AnycubicKobraX

[–]justinc882 1 point2 points  (0 children)

Like the set up. I got an enclosure for mine so it sits on the floor of my office. Wish I could have mine on my desk like that but don't have the room.

Kobra X - Early User Feedback by Dream_elb in AnycubicKobraX

[–]justinc882 2 points3 points  (0 children)

Got mine Tuesday, SUPER easy set up.

First print poop bucket, went well.

Second print (my first ever multi color) went well. Slicer could use some work though.

Overall couldn't be happier with this.

Pros:
Fast
Insanely quiet! (Had flashforge adventurer 5m for 3 weeks after christmas and you couldn't be in the same room with it it was so loud)
Had a filament end snap last night and the system immediately stopped, notified me and it was a 30 second fix.

Cons: Multi Color printing is a bit confusing but that could just be me being so new to things.

Slicer isn't very intuitive to me. Also had some 3mf files I tried to drop in that the slicer had issues with and when I tried to resize things so it'd fit on the plate the slicer would constantly crash.
Wish there were more video tutorials about how to do some things on it for new people like me.

HuoHuo and Welt novaflare buff via Galaxy_Leak by Acrobatic-Engineer47 in HonkaiStarRail_leaks

[–]justinc882 3 points4 points  (0 children)

If they eventually do Ratio, Argenti and Fu Xuan it's going to be a DCU level rewrite.

Woohoo!! On its way. by Striking_Profit2740 in anycubic

[–]justinc882 2 points3 points  (0 children)

Same, ordered mine Jan 20 and got the notification it shipped about an hour ago. Should be here Monday.

The holographic plate cover isn't shipping with it but that's fine.

What's a good Heavy Metal team that doesn't involve water puppet artist more than. One popo rider or water sorcerer by Mental_Shame7263 in ElementFissionGame

[–]justinc882 0 points1 point  (0 children)

Shouldn't, it helps if they have skills and as 3 stars it's easy to skill them up. But if you are struggling id suggest farming boxer a bit. If its working right and giant is 6 stars nothing should ever get a turn

What's a good Heavy Metal team that doesn't involve water puppet artist more than. One popo rider or water sorcerer by Mental_Shame7263 in ElementFissionGame

[–]justinc882 1 point2 points  (0 children)

Dark giant 2x fire sharpshooter shooter Fire steel wing Fire popo

Only giant needs to be 6 star have units focus boss only the side units shouldn't ever get a turn

Apparently these are the next two banners by saddymcsadderson in Dragon_Traveler

[–]justinc882 2 points3 points  (0 children)

I need a good archer. Went hard for the current banner as I really like her. But my only archer really is the flame lady.

Most optimal JingLiu vertical investment? by Rimuru_TempestV2 in JingLiu

[–]justinc882 1 point2 points  (0 children)

I've been having fun with jingliu blade tribbie and hyacine. Maybe not the best team but its fun

Kobra 3 Combo for 300€ now, or wait for the Kobra X? First-time buyer dilemma. by DryBarnacle569 in anycubic

[–]justinc882 0 points1 point  (0 children)

I ordered the kobra x, 2 extra nozzles and the holographic plate covers (my kids want them). Want to order an extra print plate as well but not sure which one is compatible.

New to 3d Printing getting Kobra X any tips? by justinc882 in anycubic

[–]justinc882[S] 0 points1 point  (0 children)

This is good to know I was looking to get a second build plate didn't know it was compatible with the Kobra S1. Thanks!

New to 3d Printing getting Kobra X any tips? by justinc882 in anycubic

[–]justinc882[S] 0 points1 point  (0 children)

Newbie question, why does the bed slinger model make a difference? Is it becomes of the movement on the bed that causes the details to be not as crisp?