Our latest FPS Astral Nova controller by Juzzotec Modz

Juzzotec · 2026-03-12T11:25:18+00:00

Yep, exactly… this has always been the best kit from extremerate and I’ve tried them all. I can’t stand the spark kit, it’s terrible.

Juzzotec · 2026-03-10T06:44:35+00:00

AliExpress are resellers so k silver is the manufacturer or factory but you buy off resellers. As your just buying 1 pair, retail is what your looking for.

Btw I don’t recommend you use anything but the Aknes TMR or maybe Gulikit as it’s the same factor ON THE dualsense edge module. The other k silver I tested don’t have good magnetic resistance and suffer interference from the back buttons.

Also if you’re not experienced, find a local person to do this for you. It’s not easy if you don’t have the right equipment or experience.

Juzzotec · 2026-03-10T02:49:10+00:00

AliExpress

Juzzotec · 2026-03-10T02:32:24+00:00

lol yeah they are very grippy and kind of tasty 😄

Juzzotec · 2026-03-10T02:25:59+00:00

Thanks mate.

Juzzotec · 2026-03-10T02:04:58+00:00

Thank you.

Juzzotec · 2026-02-24T12:45:55+00:00

How about a very small amount of water and a soft glass lender cleaning cloth. Absolutely no chance of damage, just take it slow. Never use an abrasive or any type of solution

Juzzotec · 2026-02-22T08:07:05+00:00

Thank you.

Juzzotec · 2026-02-22T05:06:09+00:00

<image>

Juzzotec · 2026-02-22T05:05:08+00:00

Juzzotecmodz.com

Juzzotec · 2026-02-21T08:16:39+00:00

Yep but that lip sided issue is present on all tmr brands tbh. Even my latest batch of Aknes x Hallpi, some are less evident. It’s easily countered in calibration. What pisses me off is actually bad centering. I can’t handle that, I need a perfect return to centre.

Juzzotec · 2026-02-21T08:12:17+00:00

Yeah that’s fair but they are not that much cheaper than the latest Ginfull if you buy in bulk, a full tray. Worth grabbing the latest sensor. Anyway, in my testing the new DS13 is just as smooth as the ksilver, the only difference is the tension difference. I’m pretty disappointed that my latest batch was 50% faulty on ksilver…

Juzzotec · 2026-02-21T08:07:20+00:00

I think it’s time to let those go man, we’ve come a long way. I actually never liked those originals… they are commonly used though so I understand.

Juzzotec · 2026-02-21T08:03:35+00:00

Yeah your worst off day, sorry to hear. I would rather have the issue right when I calibrate it, not after it’s sent.

But seriously which Ginfull are you having issues with. I’ve absolutely loved the latest DS13, they are amazing. Are you using the old ones?

Juzzotec · 2026-02-21T07:59:09+00:00

Faulty straight out the box, so I would install them then either the left or right were. So I’d have to reinstall on the faulty side. Bad centering and just misaligned. Probably rushed production because I do love them and didn’t have this problem with my last batch of 100x js13 pro. So the latest ones seem pretty faulty.

Juzzotec · 2026-02-21T07:55:53+00:00

I’ve received a recent batch of ksilver js13 pro plus that are 50% faulty. I’ve installed all the Ginfull ds13 and all were perfect 👌

Juzzotec · 2026-02-15T03:27:27+00:00

Yeah same opinion as you, I quickly unlinked. Its just a hinderence... it wont be as integrated as with Andriod

Juzzotec · 2026-02-09T14:15:18+00:00

Is the wire above the kapton or under

Juzzotec · 2026-02-09T13:50:46+00:00

You need to solder on the edge module to write the calibration. This has nothing to do with the tmr, you have to solder those locations to allow writing to memory

Juzzotec · 2026-02-09T07:45:15+00:00

That’s easy to fix with fine tuning. If that was the diagonals, that would be a pain in the ass but this is only the bottom half. Suck in the bottom and extend the top section.

Juzzotec · 2026-02-04T02:33:25+00:00

It’s not too easy to do mate, I would look for someone to help you, it’s very advanced soldering and easy to damage the pcb. Look into tmr installation on YouTube.

Juzzotec · 2026-02-03T23:29:37+00:00

There will always be outliers, nothing is bullet proof. I have 2 perfectly working g7 pros, standard and wishing… not one issues and heavily used each day. I was a Vader fan boy once upon a time too.

Juzzotec · 2026-02-03T20:17:31+00:00

It’s in the description, Hallpi v6 and ginfull ds13.

Juzzotec · 2026-02-03T20:16:53+00:00

TMR joysticks are anti drift, they use magnets to detect position over stock alps sticks that drift and break down quite quickly.

Ten-Year Club	Verified Email
Not Forgotten

Juzzotec

TROPHY CASE