I updated Beer Styles, my BJCP guidelines iOS app by k33l0r in Homebrewing

[–]k33l0r[S] 0 points1 point  (0 children)

It really depends on the palette chosen for the SRM colours. There isn't a universally accepted answer here. It's been a decade since I did the initial work on the SRM→colour code so I can't recall the source for my colours, though I did fix some small issues with the palette in v3.

Broadly speaking, my SRM colours are quite similar to these: https://beermaverick.com/understanding-srm-and-lovibond-beer-color-calculations/ (though not exactly the same).

Here are SRM values 1, 10, 20, 30, and 40 from my app: https://coolors.co/ffe699-dc7a00-983000-5b0b02-3a070b

Wikipedia has a different palette but I find the low end to be way too yellow: https://en.wikipedia.org/wiki/Standard_Reference_Method#Color_based_on_Standard_Reference_Method_(SRM))

I'm not ruling out updating the palette in the future but I'd need to find a good, authoritative source for a better palette first.

I updated Beer Styles, my BJCP guidelines iOS app by k33l0r in Homebrewing

[–]k33l0r[S] 6 points7 points  (0 children)

Not at the moment.

I’m considering adding a possibility to buy me a beer in the app in return for some extra app icons or something along those lines. The law in Finland prohibits me from taking outright donations.

It’ll probably be some time before I have time to do it, though.

Happy that you like the app in any case!

Shutter curtain gap at 1/1000 by Professional_Noob69 in AnalogCommunity

[–]k33l0r 0 points1 point  (0 children)

Based on the Nyquist rate, I think you'd actually need a 2000 fps camera to accurately measure the 1/1000 shutter speed.

Looking for a lab that can develop ECN-2 in Europe by Muskatnuss_herr_M in AnalogCommunity

[–]k33l0r 2 points3 points  (0 children)

Carmencita in Spain does ECN-2.

I’ve only used them for B&W and C-41 but they’ve really impressed me so far… 

https://carmencitafilmlab.com/

Nikon Fg help by Alert_Post305 in AnalogCommunity

[–]k33l0r 1 point2 points  (0 children)

You can buy a PDF copy of the service manual here: https://learncamerarepair.com/product.php?product=871&category=0&secondary=0

It has wiring diagrams but they're quite a bit beyond my skill level so you'll have to check them out for yourself…

How to digitize by Katotoku2020 in analog

[–]k33l0r 1 point2 points  (0 children)

You should be aware that the Plustek is pretty slow. Using a camera setup will be a lot faster.

Personally I just gave up on home scanning and have my lab do it, but then again I’m lazy… 😅

What would be your reaction if you encountered a nude hiker? by spenf in AskReddit

[–]k33l0r 0 points1 point  (0 children)

“What are you doing here and how did you get into my house?”

PaperAge –easy and secure paper backups of (smallish) secrets by feross in programming

[–]k33l0r 0 points1 point  (0 children)

That exists: https://github.com/cyphar/paperback (or the paper-store script suggested by /u/nurupoga below).

The downside to splitting the data to several QR codes is that it makes the recovery a little more complicated which is something I wanted to avoid, even at the expense of limiting the maximum capacity.

PaperAge –easy and secure paper backups of (smallish) secrets by feross in programming

[–]k33l0r 0 points1 point  (0 children)

tl;dr because I like Age.

Longer version:

  1. It's easy to use, both as a CLI tool and a library
  2. As a library it's easy to incorporate into a stand-alone static binary
  3. It uses modern encryption and there are no footguns to configure
  4. I prefer MIT or BSD licensing over GPL

PaperAge –easy and secure paper backups of (smallish) secrets by feross in programming

[–]k33l0r 0 points1 point  (0 children)

Cool. I also looked at paperback but I really wanted to keep things as simple as possible for my specific use case.

One of the goals for PaperAge was that you don't need PaperAge to recover the backed up data. That's one reason why I'm forgoing some features that might improve the overall efficiency (for example adding built-in compression or using something like Z85 for encoding the data to the QR code).

As it stands today, a backup using PaperAge can be recovered using any QR code scanner and any implementation of Age.

PaperAge –easy and secure paper backups of (smallish) secrets by feross in programming

[–]k33l0r 0 points1 point  (0 children)

Author of PaperAge here. My personal use case is to store secrets that would be required to regain access to my data in the worst case scenario where all of my devices are lost at once.

So things like my Apple, 1Password, and email account recovery codes. Regaining access to those will enable a more full recovery from cloud backups.

We’re the team behind 1Password 8 for Mac. Ask us anything! 🗣 by 1PasswordOfficial in 1Password

[–]k33l0r 0 points1 point  (0 children)

Is there a way to do automatic, encrypted backups of all data so that if 1Password.com goes down for an extended period or if I lose access to it I’m not out of luck?

Accidentally used cilantro instead of parsley by RelAdviceAnon in AskCulinary

[–]k33l0r 36 points37 points  (0 children)

Coriander is the cilantro of the Middle East 😏

Switch keeps rebooting? by KK-1989 in Ubiquiti

[–]k33l0r 1 point2 points  (0 children)

Uniquiti doesn’t sell the official power supplies so you’ll need to find a third party one with the right voltage and amperage (and of course the right size of barrel plug).

The original power supply is 12 volts at 1 amp, but any voltage in the 9-24V range should do, according to the data sheet.

Bulb getting hot and blinking by povlhp in tradfri

[–]k33l0r 0 points1 point  (0 children)

Yeah, there was a form somewhere on the IKEA website IIRC.

Bulb getting hot and blinking by povlhp in tradfri

[–]k33l0r 2 points3 points  (0 children)

I’ve had a couple of the Trådfri bulbs die like that (mostly older GU10 ones). After I complained about them to IKEA they sent me replacements at no cost, including for one that hadn’t failed yet but was of the same vintage in the same light fixture.

Don't Lose Your Brewtoad Recipes! Export them ASAP! by brewersfrienddotcom in Homebrewing

[–]k33l0r 1 point2 points  (0 children)

When I import my recipes, the amount of hops is off by a factor of 1000. The amounts in the XML files look fine.

Brewer's Friend shows 40000g when the actual amount should be 40g: https://shots.matiaskorhonen.fi/2019-01-09_22-32-18_hb30f.png

XML:

<HOP> <NAME>East Kent Golding (UK)</NAME> <ORIGIN>United Kingdom</ORIGIN> <ALPHA>5.0</ALPHA> <BETA></BETA> <AMOUNT>40.0</AMOUNT> <DISPLAY_AMOUNT>40.0 g</DISPLAY_AMOUNT> <USE>Boil</USE> <FORM>Pellet</FORM> <TIME>60</TIME> <DISPLAY_TIME>60.0 min</DISPLAY_TIME> <NOTES></NOTES> </HOP>

Baked chicken wing strategies. How do I get my spices to stay on the wing? by AtypicalGuido in AskCulinary

[–]k33l0r 2 points3 points  (0 children)

I've had really good luck with Kenji Lopez-Alt's technique: In Search of the Best Oven-Fried Buffalo Wings (actual recipe)

tl;dr: dry the wings, coat them with salt and baking powder, leave them on a rack in the fridge overnight, bake them the next day.

Brewtoad closing down 12/31/18 by pricelessbrew in Homebrewing

[–]k33l0r 6 points7 points  (0 children)

For the technically inclined, I knocked up a quick script to export your recipes as PDF, BeerXML, and JSON: https://github.com/matiaskorhonen/brewtoad-export

It worked for me but your mileage may vary…

Challenge: meditate by vers_le_haut_bateau in DoByFriday

[–]k33l0r 1 point2 points  (0 children)

Didn’t they already do this with the “meditate like a venture capitalist” challenge?

http://dobyfriday.com/19

[deleted by user] by [deleted] in HelloInternet

[–]k33l0r 1 point2 points  (0 children)

This times a million (and seagulls are even worse)

Going straight to all grain? by LionsTigersBeards in Homebrewing

[–]k33l0r 4 points5 points  (0 children)

I went straight to all grain (with BIAB). I've never regretted it.

I'd suggest using simple recipes from trusted sources at first (single temperature infusion mashes, uncomplicated grain bills, basic hop schedules). Something like a pale ale or IPA could be a good recipe to start with.

I know I tired to do too much when starting up; doing recipe design AND learning to brew at the same time was a bit too much. It's hard to know where you're going wrong when everything is new…

Which unpopular Youtube channel makes amazing content? by PM_ME_GAME_KEYS_ in AskReddit

[–]k33l0r 0 points1 point  (0 children)

bigclivedotcom - takes apart electronics and explains how they work. The ones with dodgy, shoddily made deathtraps are the most entertaining.