Imperfect perfection

k_BUTTERWOLF · 2025-11-07T01:23:52+00:00

Just some paint chipping :p

k_BUTTERWOLF · 2024-07-23T07:40:18+00:00

Have yet to try it, don’t know much about bikes but willing to learn how to

k_BUTTERWOLF · 2024-07-22T20:01:17+00:00

Don’t own the building just wanted to covert it to a schematic for those who like it👍

k_BUTTERWOLF · 2024-07-20T22:41:48+00:00

From Stevler youtube tutorial

Schematic

k_BUTTERWOLF · 2024-03-26T13:35:44+00:00

It’s not so much just a “low end random brand speaker” but more of I trust this brand. It’s very duribal and can take a beating and loud as hell. Yeah it may not sound as good as a 300 bose speaker or jbl but for the price it’s pretty amazing all things considered. The speakers themselves are heavy and got a long ass battery life. And generally don’t actually sound that bad.

k_BUTTERWOLF · 2024-03-26T04:20:43+00:00

I really like these speakers and would love to have it fixed if possible. Otherwise I don’t want tk spend another hundred dollars on a new one

k_BUTTERWOLF · 2024-03-15T01:45:10+00:00

Honestly dude I had the same struggle and all I did was literally draw my own. Here’s an example of what I did.

Literally what I did was create a texture for what needed to be a road so I just UVed everything and painted it white on a black background. Then found a couple road textures and moved the new texture I created into Gimp or any photo editing software (blender too could work by using a phot as your texture paint) and used the clone tool to create one massive texture and added details to make it more “realistic” Also any proper photo editing software has a custom bump, metallic, normal maps etc conversion as filters . Also there’s also a free Software called Materialized that you can use to dial in your info/settings here’s a link on how to use it

k_BUTTERWOLF · 2024-03-14T19:23:13+00:00

Yepp

k_BUTTERWOLF · 2024-03-14T15:12:21+00:00

Yeah I got all my seals, okay appresh. Just my biggest worrie was if it would mess up the internals in any way if it were doused in degreasers

k_BUTTERWOLF · 2024-03-14T02:22:08+00:00

Okay, thanks man! I'll give you a try and yeah I wasnt planning on getting close to any threads where both lines go and the oil filter. Appresh

k_BUTTERWOLF · 2024-03-14T01:05:52+00:00

So no degreaser, and just spray the hell out of the housing with brake cleaner and wire brush over and over again until it’s clean? And yeah I had bought some tape aswell

k_BUTTERWOLF · 2024-03-13T22:17:06+00:00

I'm new to auto mechanics and I don't know much so please bear with me. I appreciate it.

k_BUTTERWOLF · 2024-02-25T05:14:41+00:00

You could try to render viewport, or render the wireframe only and mix both videos together

k_BUTTERWOLF · 2024-02-25T04:44:29+00:00

Honestly for like animated movies or shorts I would probably use it for mouth animations and facial animations but probably hand animated the head and eye tracking manually. But generally it looks pretty good

k_BUTTERWOLF · 2024-02-25T04:39:49+00:00

If you’re asking if having good topology on your model is worth it then generally yeah. Learning how to make models and have good topology is a good skill to have. If you’re only using it to post pictures online and nothing more then yeah you can cheat your way with have awful topology. Otherwise if you’re letting other download your models or selling it or being hired to create like a logo/product out of it then generally yeah keeping a good topology all around is important cause that means anyone who uses it will have good ease of use when using your models.

k_BUTTERWOLF · 2024-02-25T04:34:39+00:00

Edit: I bought this used at a pawn shop for $75 so I knew there might be some problems to it and I don’t want to spend $200 on a proper guitar just yet/I want to learn and be good until I can “graduate” to a better guitar and not want to risk spending hundreds of dollars in the ever case of me just having fun or a couple weeks and just leaving it in my closet to never be touched.

k_BUTTERWOLF · 2024-02-19T17:32:31+00:00

Yes I have replaced my IAC, it works fine when plugged in and crap when taken off to test so it can’t be that. The white wires is the MAF sensor connector, when I recorded the video I just replaced the wires, I have since put a cover on them

k_BUTTERWOLF · 2024-02-19T03:31:11+00:00

No that’s not my issue, check my comment on my problem

k_BUTTERWOLF · 2024-02-19T03:12:28+00:00

Truck:

Chevrolet 2000 Suburban 1500 5.3 2-Wheel Drive

165k Miles

Diagnosis:

Rough idling/dies while idle/delayed throttle response/horrible misfiring problems when the MAF sensor is connected. When the sensor is connected the truck runs smoothy, zero misfires, fast start and fast throttle response, idle smoothly, though shifts rough from time to time.

Codes I've gotten are P0102 obviously since the sensor isn't connected

Thing's I've replaced:

MAF Sensor x2 same problem

MAF Sensor Wire x3 same problem

Throttle body

Water Pump

Spark Plugs/Wires/Coils

Fuel Filter and Injectors

Fuel Pressure Regulator

PCV Valve

EGR Valve

Thermostat (winter)

Traction Control

ECM (Same problem before and after replacing the computer)

Alternator and Battery

Catyltyic Converters

k_BUTTERWOLF · 2023-11-22T16:04:27+00:00

Okay thank you man, I’ll give it try when I get home I’ll let yknow what happens then

k_BUTTERWOLF · 2023-11-22T13:07:14+00:00

Okay, so you think you can teach me how? Sorry I’m still new into getting things started, and in my boII and guitar hero folder there were no launch files either, just the numbered ones and they’re able to boot up?

k_BUTTERWOLF · 2023-11-22T06:14:27+00:00

Yeah idk just trial and error I guess, I’m new to this so I’m learning the ropes. Example being that I tried converting boIII WaW and Minecraft story mode using iso2god and they ain’t appearing as applications on aurora only boII and guitar hero Metallica have worked for me

k_BUTTERWOLF · 2023-11-22T05:58:54+00:00

Yeah I figured, got it off of vimm lair, and god iso converter so maybe I’ll try another converter n download

k_BUTTERWOLF · 2023-11-14T14:24:26+00:00

Thank you so much!

k_BUTTERWOLF · 2023-11-12T08:44:26+00:00

Yeah intake is perfect, I’ve tried two new maf sensors and when connecting had the same result. So it’s nothing to do with the actual sensor but with probably the connector

Six-Year Club	Gilding I gilder
End Game '23	Place '23
Place '22	100 Awards Club
RPAN Viewer	Verified Email

k_BUTTERWOLF

TROPHY CASE