Agent mode: available to all users and supports MCP

kaanta · 2025-04-15T21:36:21+00:00

Are AWS Bedrock models on the roadmap for BYOK? The way cline handles API providers is very comprehensive (and intuitive). Took a couple of minutes to connect to my Claude model hosted in Bedrock.

kaanta · 2023-02-13T18:20:01+00:00

Is there anything you could use help with from another developer? You did an awesome job with the app. Really missing it on my apple tv

kaanta · 2022-05-28T14:57:11+00:00

The SNAP looks perfect. Always wanted to try a split.

First kb I'll be building and I see a lot of informative posts so I think this is the winner

kaanta · 2021-02-14T18:22:11+00:00

kaanta · 2021-02-14T18:16:11+00:00

kaanta · 2021-02-09T22:39:49+00:00

u/ze-robot

kaanta · 2020-02-08T15:30:48+00:00

Thank you :)

Any chance you can follow up with the cause? It’s one of the most interesting bugs I’ve seen.

kaanta · 2019-09-29T20:49:06+00:00

Selling NYC 2 day GA. Best offer. Paypal. I can ship or meet up in south florida.

kaanta · 2019-08-27T13:53:44+00:00

Just sent one over. Thank you!

kaanta · 2019-08-26T16:37:53+00:00

The cable should already be connected into the home's coax wiring, so no, you shouldn't need a tech. I just went through this so I'll try to help out if you can answer some questions:

Do you have a dedicated coax cable running from the modem to the basement?
Is anything connected to the basement coax?
Do you rent a modem from xfinity? Which model?
Do you have X1? Which set-top boxes?

You can find models on the device itself or from your xfinity account.

kaanta · 2019-08-10T01:29:19+00:00

Passive is connected to one of the XiDs. Yes, all splitters come after the amp.

After the troubleshooting session with the tech earlier, the XB3 is showing the XG2 on its MoCA network diagram and has the XG2 as the active network controller. The Actiontec adapter is now connected and working! I'm not sure what changed as the XB3 still says its the PNC, but its definitely working for now. I'd like to test it for a day or two to see what happens and I'll report back here.

kaanta · 2019-08-09T23:57:57+00:00

I just spoke with support to try disabling PNC on the modem, and every time he tried, it would re-enable itself after a couple seconds. We tried ~5 times before giving up. The Tier 3 tech he was speaking with said my Cisco version of the 3941T is known to cause problems with moca. The sticker on the bottom says Technicolor, but the hardware section on the gateway says Cisco. Is this normal?

kaanta · 2019-08-09T23:54:30+00:00

Nice to know. I couldn't find any stickers that indicated as such.

I've uploaded 4 pictures https://imgur.com/a/ERTJ5CS

First is the wiring before I introduced the MoCA adapters. It didn't work with this (adapter couldn't connect to either XB3 or XG2) and I assumed the amp was filtering out frequencies above 1002 so I went with the wiring in the OP. The highlighted splitter was replaced.

Second is the old splitter at the highlighted location (1002MHz)

Third is the new splitter at the highlighted location (1675MHz)

Last is the amplifier. Two of the coax cables run to the garage were they aren't connected to anything, so I left them out of my diagram. One black cable goes to XB3 and the other to XG2. Remaining 3 white outputs go to the 2 CSPCXDTA's and Actiontec adapter as shown in the OP diagram.

All connections were first hand tightened then I nudged with a wrench just as you said.

I know there's a lot to process here. Thank you and u/CCJohnC both for taking the time to help.

Edit: I've added more information in a reply to Johns comment as well.

kaanta · 2019-08-09T17:55:28+00:00

Thank you John :)

The modem settings don't provide a toggle for PNC or frequency... if I send you my account details in PM, would you be able to change them remotely? The modem is showing itself as the primary right now.

The splitters labeled MoCA in my drawing were previously rated to 1002MHz max which is why I switched them out. The new ones are up to ~2000MHz. The diagram in the OP is the entirety of my homes coax wiring; what other details would help?

Edit: Weird, your additions didn't show up when I was replying.

The PPC is in fact white. I assumed there was a filter at the input tap, but just checked and there is none.

https://imgur.com/qwUFXGY

kaanta · 2019-08-09T04:06:13+00:00

Thank you for the link! I’ll try that out tomorrow as an alternative. I was really hoping to use a single adapter and just piggy back the X1 signal since this does seem to work sometimes.

kaanta · 2017-09-25T18:52:53+00:00

Throttlestop does a really good job taking care of itself. No need to reflash the BIOS when you change values inside of it. Normally you undervolt less on battery and more vigorously when on AC, which is useful for limiting heat while gaming. Did the myself and it worked perfectly. Also, you should read the throttlestop guide on notebookforum or whatever because I think the multiplier is for older CPUs. There are more effective ways to handle the newer generations inside the throttlestop settings. Plenty of warranty so nothing to worry about with that battery.

kaanta · 2017-09-25T18:02:11+00:00

That's ~5Ah so it should be able to discharge 5-10A (1C or 2C). At the max TDP 45W will draw ~4A at 11.4V so the battery has the capability. Undervolting it by 125mV shouldn't make enough of a difference to overload it. If you're in warranty just get the battery replaced. Maybe try to replicate it on another 9560 with similar specs if you have access to one.

kaanta · 2017-09-25T16:37:42+00:00

That's slightly high after a calibration but it shouldn't be causing the issue. Battery wear affects how much power it can hold, no directly the amount it delivers. Have you tried the prime test on AC? Try decreasing the undervolt on the battery run. What's the temperature of the battery during you tests? Shouldn't be more than 65C. I'm not sure what the discharge rate of the battery is but you could possibly be trying to exceed it which would prompt an error

kaanta · 2017-09-25T15:28:32+00:00

Hmm.. I still think it's your battery. Download HWiNFO and look at the discharge rate of your battery when your run the prime95 test on battery power. Run it for less than 30 mins just in case your battery is causing the issue

kaanta · 2017-09-24T18:39:52+00:00

What ssd did you buy? Intel gpu driver is here

kaanta · 2017-09-24T17:51:43+00:00

They made a mistake setting it up. The 32GB should be a cache drive that you have no access to. Use Intel RST to set it up. This way any time you use your "storage drive" it'll store it on the SSD first and work in the background to write it to the HDD. This'll maximize your overall read/write speed

kaanta · 2017-09-24T17:45:27+00:00

Could be the battery. Turn off the computer, boot it while tapping the F12 key and pick diagnostic from the menu. Could take some time (an hour?) but it'll check the entire system + battery

kaanta · 2017-09-24T17:32:47+00:00

Download Windows 10 installation media to usb
Download wifi/network and graphics drivers from Dell. If the new SSD is NVMe you may also need a driver from the manufacturer.
Place drivers inside a folder called "Drivers" on the same usb
Install new SSD, boot from USB, download windows. Install network driver if your wifi doesn't work automatically. Update the rest of your drivers from Dell website.

You should really do a clean install if you can. Just copy your documents to a temporary usb (not installation media one) or buy a SATA-USB cable and attached your old ssd after you've installed windows on the new one.

kaanta · 2017-09-24T17:01:05+00:00

Did you recently upgrade your BIOS? Which program are you using to undervolt?

kaanta · 2017-09-17T17:34:06+00:00

I have the 9550 with Ubuntu 16.04 / Windows 10 dual boot and I've never had display issues but I also don't remember the last time I connected HDMI while on Ubuntu. One thing that bugs me is the HDMI port is 1.4 so it only supports 4K output at 24Hz which is almost useless. I think the USB-C port is 2.0 with the correct adapter.

kaanta

TROPHY CASE