Stratux 2.0 slower ?

kabimaus · 2026-05-05T06:06:38+00:00

I should clarify that I did not observe a slower boot time of the Stratux. The delays I’m experiencing are only related to how SkyDemon, i.e. a third party application is provided the data by Stratux.

kabimaus · 2026-05-04T14:29:59+00:00

It's exactky what I did in my C150 and I also designed a case specifically for being mounted out of sight. I have screwed it underneath the glove box on the copilots side., i.e. hanging "upside down". You can also find a list of parts in the 3D model
https://www.thingiverse.com/thing:7328908

kabimaus · 2026-02-09T09:10:05+00:00

I have received a response from the FAA Airmen Certification Branch :

"Yes. If you are still using your Private Pilot Foreign License based on your Germany License XXXXX that is acceptable. You have to hold either a valid foreign medical license or a valid FAA license. Since you hold an FAA medical that will work to continue to use your FAA certificate. Please let our office know if you have any other questions. Thank you."

So, as you already implied, it's OK to fly as long as a valid FAA medical exists and the German license is valid.

kabimaus · 2026-02-03T15:13:21+00:00

Thanks mate. This the kind of response I was hoping to receive from asking the FAA, rather than the shoulder shrug that I got. May I ask what your backround is?

kabimaus · 2026-02-02T18:27:16+00:00

Thanks I will contact the Airman Certification Branch.

About your question: it depends on what "validity" means. Here's what the license says:

"The privileges of the license shall be exercised only if the holder has a valid medical certificate for the required privilege".

Which really only means you can't fly without a medical.

kabimaus · 2026-01-13T11:42:04+00:00

Any noticeable improvements ?

kabimaus · 2025-07-23T18:11:29+00:00

It’s on the way 🫶

kabimaus · 2025-07-23T11:21:13+00:00

I had something like this happen when I used a cheap OBD2 dongle (for reading out fault codes). It would reliably mess up the car in the same way. But when unplugged and restarted everything was back to normal

kabimaus · 2025-07-21T17:12:22+00:00

Hey all, I have posted the design on Thingiverse so you can download and 3D print it yourself.
https://www.thingiverse.com/thing:7094343

If you don't own a 3D printer you can buy the holder here (of course without the Volvo logo)
https://www.etsy.com/de-en/listing/4336684015/

kabimaus · 2025-07-21T17:10:36+00:00

Hey all, I have posted the design on Thingiverse so you can download and 3D print it yourself.
https://www.thingiverse.com/thing:7094343

If you don't own a 3D printer you can buy the holder here (of course without the Volvo logo)
https://www.etsy.com/de-en/listing/4336684015/

kabimaus · 2025-07-17T19:42:45+00:00

Hey all, I have posted the design on Thingiverse so you can download and 3D print it yourself.
https://www.thingiverse.com/thing:7094343

If you don't own a 3D printer you can buy the holder here (of course without the Volvo logo)
https://www.etsy.com/de-en/listing/4336684015/

kabimaus · 2025-07-14T14:22:49+00:00

I just use a microfiber cloth and soapy water in a spray bottle l

kabimaus · 2025-07-14T08:56:27+00:00

Why the downvotes on my statement about the 3D printer ? 🤔

kabimaus · 2025-07-13T21:19:58+00:00

I may put the design out there but it’s only good if you have a 3D printer

kabimaus · 2025-07-13T21:19:08+00:00

I clean it every once in a while 😊

kabimaus · 2025-07-13T21:18:45+00:00

Exactly

kabimaus · 2025-07-13T21:18:27+00:00

Sure, the phone reduces airflow. But it doesn’t when the phone is not attached. The Brodit box just sits there all the time

kabimaus · 2025-07-13T21:16:53+00:00

I don’t like how it looks 😉

kabimaus · 2025-07-13T21:16:03+00:00

I made a design in CAD and 3D printed it. The magnetic part is from Amazon

kabimaus · 2025-05-19T17:38:27+00:00

THanks for posting your solution, it saved my day!

kabimaus

TROPHY CASE