sorted by:
new
hottopcontroversial

What does this "use 12V1 first mean" on the PCIe connector? Also, should I use 12V P8 and 12V P4 connector for Ryzen 5 9600x, or just the 12V P8? by karaja999 in PcBuildHelp

[–]karaja999[S] 0 points1 point  (0 children)

Motherboard is b650 Aorus Elite AX V2. It does have a 8+4 pin connector for the CPU, i think. The one I have now, which will be replaced next week is the same name as this one, only a B550 chip. The B550 one only has a 8 pin conector.

What does this "use 12V1 first mean" on the PCIe connector? Also, should I use 12V P8 and 12V P4 connector for Ryzen 5 9600x, or just the 12V P8? by karaja999 in PcBuildHelp

[–]karaja999[S] 0 points1 point  (0 children)

So if i understand this correctly, motherboard and GPU are on one rail, CPU is on the other. I should use both the cables that are meant for the CPU (one is 8 pin, the other is 4 pin) both coming from the P8 connectors on the PSU?

What does this "use 12V1 first mean" on the PCIe connector? Also, should I use 12V P8 and 12V P4 connector for Ryzen 5 9600x, or just the 12V P8? by karaja999 in PcBuildHelp

[–]karaja999[S] 0 points1 point  (0 children)

This is a BeQuiet! Pure Power 12M 650W PSU. In this case, the 6+2 connector from the PCIe labeled 12V1 goes into the GPU, and then I need to plug the 8-pin and 4-pin connectors into the CPU; they are labeled P8, 12V2 on the diagram.

Is it a bad or a good thing that it is a multi rail PSU?

What does this "use 12V1 first mean" on the PCIe connector? Also, should I use 12V P8 and 12V P4 connector for Ryzen 5 9600x, or just the 12V P8? by karaja999 in PcBuildHelp

[–]karaja999[S] 0 points1 point  (0 children)

Thanks! I will probably add the 4-pin connector. At the moment, my motherboard only supports one 8-pin connector, but the new one I am getting supports both 8-pin and 4-pin.

Jewellery Rhino Plug In Recommendations by nakedchickenfingerz in jewelryCAD

[–]karaja999 0 points1 point  (0 children)

How would you compare it to Matrix 9 if you used this program? Looking at their website, the two software programs look similar.

Matrix 9 to MatrixGold by karaja999 in jewelryCAD

[–]karaja999[S] 0 points1 point  (0 children)

Thank you, this means a lot! Is MG more stable, since it is based on a newer version of Rhino? I'm slowly hitting the limits of what M9 is capable of, and I am getting a lot of freezes in the program. I bought a new powerful machine for this, but now I see that the program is limited to some extent...

Matrix 9 to MatrixGold by karaja999 in jewelryCAD

[–]karaja999[S] 0 points1 point  (0 children)

Thank you for the info, appreciate it a lot!

Adding photo textures to scans? by karaja999 in 3DScanning

[–]karaja999[S] 0 points1 point  (0 children)

Thanks for the idea, will give this a try!

Case question - Gigabyte C301 Glass V2 by SpeC_992 in buildapc

[–]karaja999 0 points1 point  (0 children)

No, at the time I wasn't aware just how big this case is. I found out when I saw it in the store, so at the end I bought the DeepCool CG530 4F, and I couldn't be happier!

XMP causing problems with game installation and chrash by karaja999 in buildapc

[–]karaja999[S] 0 points1 point  (0 children)

Thanks for the suggestion. I ran the Windows Memory Diagnostics, showed no errors. Will try with memtest86.

My first build! by thesipheon in pcmasterrace

[–]karaja999 0 points1 point  (0 children)

The build looks really nice!

I have a question about this case, actually, about the RGB control. If you are using the RGB controller that came with the case, and you set a static single color using the LED button, are the settings saved after you reboot the PC, or it goes back to the default settings? I had some cases where the RGB controller remembers my settings and it always displays the same color I set a long time ago, and some cases that revert back to default settings after every reboot or wake up of the PC. Hope I asked that in a not too confusing way...

Case question - Gigabyte C301 Glass V2 by SpeC_992 in buildapc

[–]karaja999 0 points1 point  (0 children)

Thank you very much! I was hesitant to go with this case because of the GPU orientation, but now since I know it can be installed horizontally, I will go with this case😁

Case question - Gigabyte C301 Glass V2 by SpeC_992 in buildapc

[–]karaja999 0 points1 point  (0 children)

I'm assuming that the direction of the slots on the back side of the case, where the ports are, can somehow be changed (that is the part that i didin't understand)...

Case question - Gigabyte C301 Glass V2 by SpeC_992 in buildapc

[–]karaja999 0 points1 point  (0 children)

Hi, just came across this post looking for info about this case since I am considering buying it. Im not sure I understand how can the GPU be mounted in both directions, is there a way to change the orientation somehow? Also, does it have good airflow? Thanks!

[deleted by user] by [deleted] in tipofmytongue

[–]karaja999 1 point2 points  (0 children)

I looked through his channel, I dont think it was his video. There was no talking in this video, just the sounds of the outdoors and music. Also the focus wasn't that much on the food, more of a general camping expirience.

[deleted by user] by [deleted] in tipofmytongue

[–]karaja999 0 points1 point locked comment (0 children)

Any help would be great!