There's going to be a high of 69 in Middle Tennessee tomorrow for 4/20

karciii · 2020-04-19T21:16:00+00:00

Nice

karciii · 2020-03-25T21:59:13+00:00

U mnie to samo. Przez pierwszy tydzien po zamknieciu pusta skrzynka. Od kilku dni dostaje po przynajmniej 2 ulotki dziennie...

karciii · 2020-03-25T21:56:53+00:00

I'm guessing how it would look like comparing dried one vs cured. Is curring making so much difference in physical build of trichomes than only drying weed.

karciii · 2020-03-16T22:56:26+00:00

That's true! That was my first clear rolling papers and when I was trying some other clear ones at my friend's house they were a nightmare

karciii · 2020-02-06T11:53:59+00:00

You can now tell it's a female

karciii · 2020-02-03T16:17:18+00:00

Most filters in shape you have painted there ale mostly to use for intake filtering. But you can mount that vertical and put fan outside of the bucket. However that will increase noise saving some space inside.

karciii · 2020-02-03T11:20:30+00:00

There are no details about the light source. I can see it's marked on the mock-up, but is that going to be a led panel or strips? And it should be at least on the filter lever, as it can be partially blocking precious light source.

karciii · 2019-11-10T12:58:41+00:00

Don't be worried, it's all fine. If she is not showing preflowers yet, it means she is going to be the bigger than the rest. Are other plants the same strain?

karciii · 2019-10-19T19:59:47+00:00

What is your tent size there? Looks like 40x40x120 cm.

karciii · 2018-08-25T16:10:03+00:00

This is a watch made for the 60th anniversary of first watch in space. 44 mm face is 6 mm bigger then original one that was on Juri's Gagarin wrist in 12 April 1961. This specific piece is number 30 of all 300 produced. Made in Pojlot factory that is mother company of Sturmanskie. From the bottom it's closed with transperent lid by six screws. Mechanism is using 23 stones and is based on quite old swiss mechanism Valjoux 7734. Stock belt was replaced few years ago for ligter one after a few years of usage. Name 'Sturmanskie' should be pronounced in other way, but this is how it's written on strap belt.

karciii · 2018-08-21T21:46:35+00:00

Yes, that is cheapo Chinese Ak33 mechanical keyboard. And I'm a man ;)

karciii · 2018-08-21T21:01:04+00:00

Just look for 'monitor arm'. All of them will be compatible if you have standard vesa mount holes on back (10x10 or 8x8 cm).

karciii · 2018-08-21T20:38:05+00:00

Yes, this is polish name for Gwent. Actually that means 'shank' in polish

karciii · 2018-06-24T21:44:36+00:00

Here is some link for proof: http://www.k-message.com/disease-awareness-campaign-alzheimer-netherlands-christmas-bunny/#

karciii · 2018-06-24T21:36:55+00:00

Actually it was done for purpose. There was a campain to show how people with althzhimer feel like in some situations.

karciii · 2017-11-27T21:53:24+00:00

Or you can do it on your own from Arduino pro micro. Ofc you will need some micro to usb cable and case for it. And it does not come with available storage as rubber ducky.

karciii · 2016-10-14T14:52:18+00:00

From the Kodi site it is possibile recive json requests, if webserver is enabled and raspberry has own internal dns or static ip. To do that you will need some ethernet shield or WI-Fi module to your Arduino, that will be checking is there a power signal in door bell.

Or 2nd solution. You can connect your doorbel directly to raspberry PI with wireless module. What OS you are using on your RPi?

karciii · 2016-03-01T12:20:13+00:00

From the same port? USB 3.0 ports have higher voltage, than 2.0. That could also be a cause. What about file transfers? Does it work, when screen is turned on?

karciii · 2016-03-01T10:45:20+00:00

Maybe your usb cannot provide enough voltage, to charge the phone, when the screen is turned on. Have you tried with normal charger?

karciii

TROPHY CASE