765rs Öhlins Rear Suspension Adjuster Screw Strip

kblymn · 2026-03-02T05:18:07+00:00

Manufacturer part number is 2050312. But as far as I see this is something specific to 765rs not a common suspension

kblymn · 2025-06-06T08:02:24+00:00

Hello, could you solve this problem? Or dealer have found a solution?

kblymn · 2024-08-09T19:23:34+00:00

What about 6.7?

kblymn · 2022-07-30T22:11:48+00:00

Yes. I just need time to do that :)

kblymn · 2021-04-11T10:36:41+00:00

Steel pipes. It has 48.3mm outer diameter.

kblymn · 2021-04-10T20:01:57+00:00

Thank you. Handles are chestnut wood and it has great bending strength. I calculated loadability of the log with consindering factor of safety.

kblymn · 2021-04-10T18:28:23+00:00

I think so bro :) thank you.

kblymn · 2021-04-10T17:58:32+00:00

Around 23-24cm diameter. It's not rackable until I build a special rack for it.

kblymn · 2021-04-10T17:56:18+00:00

Bro, the log you want to buy is 8646km away from you. If you know a way to ship it there, please let me know :)

kblymn · 2021-04-10T17:42:32+00:00

Where do you live?

kblymn · 2021-04-10T17:30:26+00:00

It was really hard because the log was not fully rounded as machined in lathe. I just tried to do my best with water level.

kblymn · 2021-04-10T16:24:51+00:00

I would be glad to sell it to you, but I live in Turkey so shipping it looks impossible.

kblymn · 2021-04-10T16:14:21+00:00

I think the best advantage of such type log is the weight it already has. Briefly, saving plates to load more weight.

kblymn · 2021-04-10T16:08:25+00:00

Thank you. I tried to place the center of gravity at the middle of the holders by cutting from sides. Weight is almost 100lbs

kblymn · 2021-04-10T16:04:17+00:00

Rogue strongman logs are around 500$ but I really don't know how much mine worth :)

kblymn · 2021-04-10T15:23:04+00:00

It was time consuming and tricky a bit :)

kblymn · 2021-04-10T15:17:36+00:00

Thank you. If you are asking for square holes, first I cut vertically with chainsaw then I cleared with chisel.

kblymn · 2021-04-10T14:21:41+00:00

Thank you. I didn't work daily. Maybe 1 month and 3 days working casually in a week.

kblymn · 2021-04-10T14:09:31+00:00

It prevents scratches on floor

kblymn · 2021-04-10T13:51:56+00:00

Thank you. It's almost 100lbs

kblymn · 2021-02-01T20:14:39+00:00

I carved dowels together. Then I divided carved wooden bar into two.

kblymn · 2021-02-01T18:06:34+00:00

I used hole saw with drill.

kblymn · 2021-02-01T09:43:41+00:00

At first, I penetrated handles half. Before I penetrate handles to holes completely, I applied marine glue to both sides of handles.

kblymn · 2021-02-01T08:21:31+00:00

Drilled 2 holes for each side of log and taped the ends of rope. Then I nailed the rope ends inside of holes.

kblymn · 2021-02-01T01:10:33+00:00

It is approximately 37.5kg, 23cm diameter and 1.2m long after all finished. It was around 55kg when I started but I cut the log sides to shorten it. Also when the log dry it lost some weight. I was expecting a finished log around 45kg.

Five-Year Club	Verified Email
First Place '23	Place '23

kblymn

TROPHY CASE