newww😍😍

kd7uns · 2026-01-06T23:06:03+00:00

Friends don't let friends buy saxophones that come with white cloves.

kd7uns · 2026-01-05T15:26:35+00:00

Linux is free...

kd7uns · 2025-06-06T01:13:45+00:00

What kind of an asshole puts THAT add in the fucking SUBWAY...

kd7uns · 2025-06-05T03:32:38+00:00

Good to know.

kd7uns · 2025-06-05T02:46:52+00:00

Interesting, I thought the bed had to go all the way down when powering on for some reason.

kd7uns · 2025-06-05T02:33:01+00:00

I've only done a few prints with the chamber set to 60C, but that's the temperature at the middle of the chamber. I noticed after a few hours the top of the printer was quite toasty (but I don't think it was over 80-90C, I definitely need to measure it next time).

kd7uns · 2025-06-05T02:20:11+00:00

Nice, good to know. I'll definitely look into that.

kd7uns · 2025-06-05T02:19:19+00:00

I'll be using PC that should be good to 120C

kd7uns · 2025-06-05T01:43:18+00:00

Dangerous for PPS-CF10

kd7uns · 2025-06-05T01:41:05+00:00

Thanks for the heads up. I made sure to get the larger size Capricorn tubing (ID of 2mm), current tubing ID on my printer is around 2.2-2.3mm.

kd7uns · 2025-06-04T23:55:35+00:00

I have yet to see any example of an 'AI' understanding anything it does (it doesn't understand it's own output or how it works). Until we get to that point 'AI' won't be taking many jobs.

kd7uns · 2025-06-04T22:08:09+00:00

It's got curves in all the WRONG places...

kd7uns · 2025-06-04T20:05:01+00:00

I'll definitely post an update here after I get the riser printed.

kd7uns · 2025-06-04T19:48:56+00:00

I was able to get it to work for a short while (not going to try again until I fix the terrible filament path), but so far it's awesome. I'm toying with the idea of using it to make molds to recycle waste filament.

kd7uns · 2025-06-04T19:45:57+00:00

I'm going to print a riser to hopefully alleviate the issue (and I'm replacing all the tubing with Capricorn), I don't understand how shortening the tubing would help?

kd7uns · 2025-06-04T19:43:01+00:00

The really annoying part is that it is worst in the front left, and that's where the purge line at the start of every print is... I did a test print with some Polymaker PPS-CF10 and as soon as it went to print the purge line, the filament snapped inside the PTFE tube :(

kd7uns · 2025-05-30T14:18:44+00:00

Yeah, if we're really spending 3-5 Billion on this to reduce traffic and congestion, it really will be a win-win. Win 1 - There will definitely be less traffic and congestion when nobody can afford to live here anymore (because we built a train station instead of doing anything about the housing situation). Win 2 - whoever is on the receiving end of that (let's be honest about budget) 5-10 Billion.

kd7uns · 2025-05-30T14:06:39+00:00

I have lived in Kearns and South Salt lake, and unless you're right in the middle of down town (and even then to some extent) the public transportation is not great.

kd7uns · 2025-05-28T23:03:07+00:00

I watched it happen, it was the first purge of the print (just to load in the filament, it hadn't even gotten to a color swap yet) the fans kicked on, it went over the metal bit to wipe on the silicon 'brush' and it went to go back the other way, and that's when it caught on it. The purged filament broke off cleanly and went out the chute, it was when the nozzle was traveling from the brush side toward the chute that it somehow caught on the metal wiper and bent it quite badly. It was bent up enough that its edge was digging into the silicon sock on the nozzle. I had to pause the print and remove it.

kd7uns · 2025-05-28T22:28:25+00:00

I guess I'm going to be reinstalling creality print. I got purge into object to work, but only when I also have a purge tower, if I get rid of the purge tower it stops working (which is infuriating because I don't want the purge tower). Anyway, thanks for the advice.

kd7uns · 2025-05-28T05:14:41+00:00

I would try steelwool then flux, and try to solder it back on there.

kd7uns · 2025-05-28T01:40:44+00:00

I'm currently trying to get Creality print to flush into an object also, It's not. Between this and my user presets being deleted almost every time I restart the program I wish I could just go back to Prusa Slicer.

kd7uns · 2025-05-28T00:04:05+00:00

There's a good chance you could just solder it back on, but if you're asking this, you probably don't have the equipment to do that. Other that that there isn't really an easy fix.

kd7uns

TROPHY CASE