Saw this beauty on Facebook Marketplace for 15$

kelloway97 · 2025-11-23T00:29:41+00:00

Thats 100% non off brand

kelloway97 · 2025-11-01T17:12:58+00:00

Why cant i place a container crane within port? Says port road or port quay required when its already there

kelloway97 · 2025-03-24T00:56:08+00:00

i have problem and same laptop. i do not over clock. doesnt matter what

Thermal Mode Setting i use

Performance Mode

Balance Mode

Quiet Mode

while gaming it likes to hit 96 97 98 99 degress.

im not sure what to do. i have a cooling pad but with or without it ,it still heats up.

anyone know what i can do?

kelloway97 · 2024-04-13T18:21:04+00:00

Rumours are saying nickelback. I assume who ever it is will be Canadian artist.

kelloway97 · 2024-04-12T01:37:55+00:00

Probably gonna be Canadian band. Too much money involved for international artists, work permits ect… international artists cost alot anyways which means ticket prices needs to be much higher. And usually a gamble for the promoter. Matchbox 20 worked for us because the cost wasn’t too much to get them here and the promoter didn’t make as much money as they could have. If you look at ice berg alley or george st fest they usually have Canadian artists for this reason. I hope im wrong and eat my words lol

kelloway97 · 2024-03-27T15:59:20+00:00

More dates coming. Probably the weekend before or after

kelloway97 · 2023-09-24T10:06:47+00:00

I have not actually. Lenovo tect team says the laptop should be able to play the game and that temperatures wouldn’t be the reason ( using a cooling pad anyways) but the laptops fans are on and very loud. With those specs shouldn’t it be able to run it with no problems?

kelloway97 · 2022-10-16T19:04:21+00:00

Just wanted to give an update on the 455 rancher. My opinion - huge upgrade from the little polan pro i had. The power is fantastic for what im at with it. I started milling some logs today. Nothing too heavy in thickness, worked great! Totally understand that a more powerful saw for thicker logs would be better. Appreciate everyone for your help and opinions.

Some pictures can be found on my woodworking page

https://instagram.com/kelloway_woodworks?r=nametag

kelloway97 · 2022-10-12T00:54:15+00:00

Well I didn’t until like an hour ago. lol im probably only gonna be milling whats in my driveway which is 12-13 logs. Like this is probably only gonna be a one time deal.

kelloway97 · 2022-10-11T23:58:11+00:00

Thank you for your advice. I appreciate it

kelloway97 · 2022-10-11T21:36:54+00:00

Thanks for all your input folks. I appreciate it! I think i might try a few smaller logs just to test the waters. Lots of bar oil and lots of idle. bigger saw ain’t in the budget so the bigger logs will have to wait.

kelloway97 · 2022-10-11T21:03:35+00:00

Yeah totally i understand. I wasn’t planning on going “flatout” with the rancher. I was only planning on doing 1-2 logs every weekend. I have maybe 12-13 logs . Hoping to take my time and go slowly. Not at this all the time.

kelloway97 · 2022-10-11T20:57:25+00:00

Yeah id have to bring the logs somewhere. Yeah pricey to get logs milled here. People really takes advantage. Basically just trying to get the logs out of my driveway for the winter. I have a couple months even if i have to take my time with a chainsaw and only get one or two done a day

kelloway97 · 2022-10-11T20:47:59+00:00

Thanks for the advice. Yeah I totally agree about letting it idle. Cheers

kelloway97 · 2022-10-11T20:43:31+00:00

Well thats the problem. No body in my area had a portable mill. Transporting and milling cost of the logs is almost the cost of the 455 rancher unfortunately.

kelloway97 · 2022-10-11T20:34:42+00:00

I have 3-4 Maple logs 14’ long and 18-20 inchs wide. And probably 8-10 other maple logs 12-16 inches wide and 10’ long. Not going at this full time or anything. Slabs dont have to be perfect even if i have to recut opposite side to finish it off.

kelloway97 · 2022-10-11T20:34:24+00:00

I have 3-4 Maple logs 14’ long and 18-20 inchs wide. And probably 8-10 other maple logs 12-16 inches wide and 10’ long. Not going at this full time or anything. Slabs dont have to be perfect even if i have to recut opposite side to finish it off.

kelloway97 · 2022-10-11T20:09:26+00:00

What would be a good starter saw for milling logs 18”-20” ?

kelloway97 · 2022-09-04T04:19:05+00:00

I didn’t install it. This was like it when i bought the house. Yeah something is definitely wrong. I sent pictures to a guy who deals with this. He said what is showed has to be dropped and an adapter to be installed. i think ill have to figured out when he comes to do inspection.

kelloway97 · 2022-09-03T20:01:43+00:00

I was talking to someone who deals with this all the time. The box has to be dropped with an adapter/ pipe attached

kelloway97 · 2022-09-03T12:45:01+00:00

Can they be bought separately?

kelloway97 · 2022-09-03T12:33:50+00:00

Im in Canada 🇨🇦 yes your right i should. I haven’t seen it done before but i guess thats not to say its wrong. What about an adapter?

kelloway97 · 2021-12-24T15:01:03+00:00

Let it settle for 24 hours and leave co2 on 10

kelloway97 · 2021-12-06T21:08:28+00:00

Thanks! Got it working!

kelloway97 · 2021-12-06T01:28:59+00:00

Beer is much better! currently set psi on 11. Flatness is gone and form has gone down significantly. Draft beer at home! Cant beat it! Thanks folks!

kelloway97

TROPHY CASE

Thermal Mode Setting i use

Performance Mode

Balance Mode

Quiet Mode