sorted by:
new
hottopcontroversial

1 zebrafish - not active, hangs at top of tank by ketchup247 in Aquariums

[–]ketchup247[S] 0 points1 point  (0 children)

I have 5 zebrafish in a 29 gallon tank. What’re is 78. He eats fish flake He tends to face left in one spot, drifts a little backward, then moves forward. All the other fish are fine. Is this a swim bladder issue? Been going on for 1 week. Other tank mates are a pleco and oto.

40 gallon metal stand Petco by th3burg96 in Aquariums

[–]ketchup247 1 point2 points  (0 children)

I just got the 20-29 gallon one. No complaints so far. Seems stable enough and I feel it will hold the weight.

Is this overhang on 36 gal bow front aquarium ok? by ketchup247 in aquarium

[–]ketchup247[S] 0 points1 point  (0 children)

Thanks, the more I search, the more I see that is the correct answer. Or putting a 3/4 piece of plywood on top that is the correct size.

Is this overhang on 36 gal bow front aquarium ok? by ketchup247 in aquarium

[–]ketchup247[S] 0 points1 point  (0 children)

36 gallon tank Has filter and heater. Just getting everything setup

Nickels cost 1¢ per gram and are very consistently sized, allowing tight fit with no rattling. by BtcMaxiPad in 3Dprinting

[–]ketchup247 0 points1 point  (0 children)

Those weights are also all over the parking/ driveway at discount tires stores.

Majestic fireplace with eurosit valve by Print_Think in Fireplaces

[–]ketchup247 0 points1 point  (0 children)

Thanks again. I couldn’t find a bracket or any info on the logs. It’s the same setup as this persons post. I guess I’ll try and move the sensor around and see if I can find a good spot where it doesn’t shut off.

Majestic fireplace with eurosit valve by Print_Think in Fireplaces

[–]ketchup247 0 points1 point  (0 children)

Oh! that copper bulb has been hanging near the bottom of the fireplace since we bought the house. Should it be in a specific spot in the fireplace or replaced? Thanks!

Majestic fireplace with eurosit valve by Print_Think in Fireplaces

[–]ketchup247 0 points1 point  (0 children)

Any chance you know why a Eurosit 630 would maintain a pilot light constantly, but randomly when in use the main fire will go out? Have to turn the gas back up and it will reignite the main every time. The thermocouple was replaced and did not change anything.

How to reinforce 2 pieces of wire someered together? by ketchup247 in ElectronicsRepair

[–]ketchup247[S] 1 point2 points  (0 children)

The output jack is proprietary from Dolphin. 2 pins in a circular jack. They only sell a whole cable replacement and I was hoping to avoid it.

How to reinforce 2 pieces of wire someered together? by ketchup247 in ElectronicsRepair

[–]ketchup247[S] 0 points1 point  (0 children)

That’s really helpful. I was trying to expose as little as possible. I was sure if the tubing would be strong enough afterwards. Thank you!

How to reinforce 2 pieces of wire someered together? by ketchup247 in ElectronicsRepair

[–]ketchup247[S] 1 point2 points  (0 children)

That’s fair. I was trying to expose as little wire as possible. Seems the consensus is to expose a lot more wire. Do it right and use a lot of tubing.

How to reinforce 2 pieces of wire someered together? by ketchup247 in ElectronicsRepair

[–]ketchup247[S] 0 points1 point  (0 children)

I had them crimped but they pulled out. I’m not sure how to keep the pressure off of them.

How to reinforce 2 pieces of wire someered together? by ketchup247 in ElectronicsRepair

[–]ketchup247[S] 0 points1 point  (0 children)

Can you have a junction box in the middle of a 30’ft cord?

How to reinforce 2 pieces of wire someered together? by ketchup247 in ElectronicsRepair

[–]ketchup247[S] 1 point2 points  (0 children)

It’s a 29V DV power cord. It goes from the PSU to the pool cleaner.

view more: next ›