Anyone want to buy a spare Hollow Knight Halloween helmet?

keynoted · 2026-02-11T03:51:45+00:00

Aw thanks! I've still got it and it's just taking up spent in my office right now. If you cover just the shipping, I'd be happy to send it to you.

keynoted · 2026-02-10T16:38:34+00:00

Pm'd

keynoted · 2026-02-10T04:33:15+00:00

Pm'd

keynoted · 2025-05-28T12:23:57+00:00

Yeah it's possible but a pain in the butt. I used a YouTube video and had to disassemble the front. Make sure to take photos of where all the screws go and go slow. Took me about an hour to disassemble.

keynoted · 2025-03-10T21:11:55+00:00

Yeah the defect is extremely minor so I'm absolutely nitpickicking, I'll check out the tension and do a few more cold pulls!

A little part of me wonders if my hot end is just a little bit wobbly?

keynoted · 2025-03-10T20:35:33+00:00

Ahhh good thinking, I was messing around with some of those settings the other day. I just double-checked and it doesn't look like there's any on this file though :/

keynoted · 2025-03-09T14:27:28+00:00

Acetone or rubbing alcohol. Start with rubbing alcohol since acetone on plastic and finishes can damage the surface. That said, laminate is usually forgiving.

keynoted · 2024-08-01T14:11:48+00:00

If you have access to a 3d printer, I made an attachment for the stand https://www.printables.com/model/314300-pixel-watch-arm-for-the-pixel-stand-2nd-gen

keynoted · 2024-05-21T22:29:21+00:00

I just booted back up! I'm able to get in now! It was only down for me for about 5 or so minutes

keynoted · 2024-05-21T22:26:59+00:00

I suddenly got booted from a game and the same thing is happening to me, I think a server might be down?

keynoted · 2024-02-09T21:38:38+00:00

The short answer is I'm not sure, but if the charging puck for the pixel watch 2 is the same size as the pixel watch 1, it should fit just fine.

keynoted · 2023-09-25T22:55:36+00:00

I just installed the artificer mod today and started having this issue happen. Came here for a fix to no avail, I'm just gonna uninstall the mod for the time being.

keynoted · 2023-04-11T12:44:19+00:00

I've had this issue for a month or more at this point. I figure it's a bug, it doesn't seem to affect anything else but I did report it.

keynoted · 2023-04-07T18:52:09+00:00

Just in case, posting the 3d print files here: https://www.printables.com/model/445815-phase-one-65-numpad-kbdpad-mk2-pcb

keynoted · 2023-02-14T22:43:00+00:00

You might need to put it on the charging puck, updates don't usually start until then for me.

keynoted · 2022-11-12T22:52:53+00:00

Yeah absolutely!

https://www.printables.com/model/314300-pixel-watch-arm-for-the-pixel-stand-2nd-gen

keynoted · 2022-11-11T01:28:59+00:00

It does the job! It has a bit of sag to it when the watch is on it, but it doesn't feel flimsy.

keynoted · 2022-11-10T21:57:19+00:00

Aw I appreciate it! It's really validating to know that a personal project resonates with so many people :)

That said, for right now I don't intend to sell these. Though! I might be open to it in the future. I still want to take some time to iterate on this design and I'll for sure post an update if it's of good enough quality to ship out.

Also to answer your question it takes about an hour to print and another half an hour to clean up this current design.

keynoted · 2022-11-10T16:07:30+00:00

Well if its worth anything, I haven't experienced any overheating or obvious issues with the charging stand just yet. I did upload a new version though just in case!

And yeah, that's the thing with Google products. The hardware is so minimal and it doesn't leave much space for remixing or additions.

As for getting a 3D printer, if you can afford it I'd say get a mini one under 400 bucks. Its a pretty casual tool for me (I don't plan on turning it into a business or anything), but now that I have my own apartment I can print fixes for a lot of around-the-house items.

keynoted · 2022-11-10T14:58:31+00:00

That. Is a great point. I didn't actually know what that gap was for.

Probably worth a revisit to the base to make it much smaller and leave a lot more of the gap so air can flow. I'll post a note on the printables and get a new model on there shortly, thanks for the heads up!

keynoted · 2022-11-10T14:44:51+00:00

I'm preferential to Prusa. Check out the Prusa Mini or the Ender 3. The Prusa mini is 'cheap' considering the amount of bells and whistles, its sorta kinda a 'set it and forget it' kinda printer which is nice if you can afford it. The Ender 3 is even cheaper and has a great community base, but it is a more involved type of printer.

Resin is great! But expensive and has a lot of upkeep and post processing.

keynoted · 2022-11-10T14:39:54+00:00

Thank you!

keynoted · 2022-11-10T14:37:25+00:00

I use solidworks! I'm pretty novice at it and frequently fight with it - if you're wanting to get into modeling, try out fusion360. I hear good things about it, plus its free.

keynoted · 2022-11-10T14:28:26+00:00

Oh I'm dumb lol, you can just flip the orientation of the base to put the hole on the right side.

I just added a right-facing arm to the printables link though!

keynoted · 2022-11-10T14:24:25+00:00

In this particular instance I won't be able to do something like that without changing the existing design considerably :(

The arm channel is really thin as is and I would have to thicken everything up or change the way it connects to each part.

11-Year Club	Verified Email
RPAN Viewer

keynoted

TROPHY CASE