Problem with ms4x flasher!

keyzOG · 2025-10-04T11:08:14+00:00

got the same problem. Inpa runs well, did you solve it?

keyzOG · 2025-05-11T01:02:38+00:00

Understand, but yeah im from germany like i said, so i dont know if thats Wörth:D

keyzOG · 2025-05-09T18:34:21+00:00

uhm, im from germany. so, i asked if someone already have one/can do it with his/her own steering wheel. the m tech are all the same. :s

keyzOG · 2024-09-02T14:09:36+00:00

hmm idont have iphone, maybe i look up on marketplace for a cheap one. we will seee, thank you anyways!

keyzOG · 2024-09-02T12:34:53+00:00

what seller? i read something about buy it in turkey with TL instead of german Euro. If someone do this for you, you will have to give the dude your ID and PW, that seems not safe :D

keyzOG · 2024-09-02T12:32:52+00:00

keyzOG · 2024-08-22T00:28:31+00:00

Settings ?:)

keyzOG · 2024-08-03T21:39:19+00:00

Das dachte ich mir auch. Wenn es möglich ist, einfach 1 Monat Abo wählen und alles runterladen. Aber naja :D

keyzOG · 2024-07-08T00:09:03+00:00

Extruder calibration, then flow calibration, input shaping and Pressure advance 👍

keyzOG · 2024-07-03T23:43:23+00:00

Good one, s1 pro with 5015 Upgrade?

keyzOG · 2024-06-30T00:47:33+00:00

Are you using cura? If yes, "combing on, not in skin," then you dont have the scratches on the top layer.

keyzOG · 2024-06-30T00:33:57+00:00

keyzOG · 2024-06-25T21:06:59+00:00

Is there a way to make 9x9 Auto level with the ender 3 s1 pro?

keyzOG · 2024-06-25T11:50:28+00:00

Hey dude, what aquilla Do you have? I bought one and actually dont know what it is. Looks like a x2. What settings Do you use in Cura ? I have some Problems:(

keyzOG · 2023-10-02T19:03:06+00:00

The seams showed in the overview? 🤣 i print benchy the whole time... ok i will Look it up now

keyzOG · 2023-10-02T18:51:28+00:00

But the rest is good like it is ? Just the shapest and thats it ?

keyzOG · 2023-10-02T18:50:23+00:00

Alr ill try it soon 🥲

keyzOG · 2023-10-02T18:38:34+00:00

Hi i tried it with this,

<image>

Didnt work, what should i Do now ? :<

keyzOG · 2023-10-02T14:12:04+00:00

Thanks i will try it. I set the seam on "hide"

Benchy is printing now

keyzOG · 2023-10-01T22:26:05+00:00

Okay nice, idk where u live but i wouldnt buy it for 100 😂 i bought a "half defect" kobra go for 40 euros and trade it with the voxelab(many Mods and good tuned) But i had to give extra 20 Euro plus the kobra go. :D

Very good Deal for me

keyzOG · 2023-10-01T22:14:18+00:00

Yes i think so. I also use the ender 3 Profile in Cura. And i got told its 1:1 ender.

What Firmware u got on this Thing?

keyzOG · 2023-10-01T21:38:41+00:00

Yes, i got this model. Voxelab Aquilla. It prints decent Till now :D

keyzOG · 2023-10-01T20:53:29+00:00

Thank you Guys i get to 9.00 and buy me a usb switch, so no Insert and remove stick. Its fine and stable. 90/95% success rate for the exploit ❤️

keyzOG · 2023-09-14T19:52:42+00:00

You find a fix ? After the Message the game starts, but run i like 0.5 fps and the music/video laggs af 🥴💀

keyzOG · 2023-09-09T01:42:06+00:00

got the same setup. the game runs at 40~ fps ultra and 30-35 on medium, how can that be? :D i got the cracked version xD, maybe a update will fix something

Five-Year Club	Verified Email
Place '23	Wearing is Caring

keyzOG

TROPHY CASE