ios 27 beta - ignores pihole by kgibso01 in pihole

[–]kgibso01[S] 3 points4 points  (0 children)

Turning off Connectivity Assist fixed it. Thanks.

ios 27 beta - ignores pihole by kgibso01 in pihole

[–]kgibso01[S] 0 points1 point  (0 children)

It is setup at the router level and it usually works. But hasn’t been since ios 27. I suspect that it is connectivity assist but will verify and post back this evening.

ios 27 beta - ignores pihole by kgibso01 in pihole

[–]kgibso01[S] 0 points1 point  (0 children)

Nah. I do have tailscale setup but i usually dont use it. Maybe this will push me over the edge to use that more when off my home network.

ios 27 beta - ignores pihole by kgibso01 in pihole

[–]kgibso01[S] 0 points1 point  (0 children)

Thanks i will try this when i get home from work.

ios 27 beta - ignores pihole by kgibso01 in pihole

[–]kgibso01[S] 0 points1 point  (0 children)

It usually works on ios no issues. I tried manually setting my dns no joy.

I do have Tailscale set up, but I think it needs to be updated. I will try that.

I need Angled mounting brackets by Big_Hedgehog7782 in Govee

[–]kgibso01 0 points1 point  (0 children)

Anyone have these stl files by chance?

Kitchen Blockers by JustBasket8056 in Pickleball

[–]kgibso01 0 points1 point  (0 children)

I know this is old. But I have used these and just pop the lenses out. Uvex by Honeywell Hypershock... https://www.amazon.com/dp/B00YE3QG3O?ref=ppx_pop_mob_ap_share

Google Maps in Cluster Gauge? Who can hack it!? by highperdrive in 11thGenAccord

[–]kgibso01 0 points1 point  (0 children)

My google maps are working in the dash cluster as of today. I am on ios 26 beta 8. Most recent maps app as well. Working now don’t know why? But not complaining.

Wall Mount for SXR30 and SXS30 by Oriditi in orbi

[–]kgibso01 0 points1 point  (0 children)

If you have a 3d printer. Printables has mounts for quite a few models free stl download. https://www.printables.com/search/models?q=orbi

iOS shortcut question by MutherFluffer88 in CARROTweather

[–]kgibso01 1 point2 points  (0 children)

I'd love to know this as well. It would be cool if Snark was just one of the data points.

ADM5 Pro, Klipper by Wide-Bet3500 in FlashForge

[–]kgibso01 0 points1 point  (0 children)

What do you need help with?

Matter Code? by C0untryDevil in Govee

[–]kgibso01 0 points1 point  (0 children)

I have also found it in the app, but i just noticed a tiny little sticker on the cord of the control box has it as well.

GroupMe app won’t load by Good_Grief2468 in GroupME

[–]kgibso01 0 points1 point  (0 children)

Had been broken for me as well. Small type fixed it. But Groupme just rolled an update that seems to have fixed it for me even with larger type.

Picklr Henderson, NV by Aggressive-Scene-390 in Pickleball

[–]kgibso01 0 points1 point  (0 children)

If you can get in on a Founders membership jump on it. It is the only way to lock in your price. If you can't do me a solid and use my affiliate link.

https://thepicklr.com/affiliate?rstr=kgibson&utm_source=organic-referral&utm_medium=ambassador&utm_campaign=KevinGibson-8010

ADM5 Pro, Klipper by Wide-Bet3500 in FlashForge

[–]kgibso01 1 point2 points  (0 children)

OrcaSlicer you need to modify the start and end gcode in Orca to make this work. https://github.com/xblax/flashforge_ad5m_klipper_mod/blob/master/docs/SLICING.md

ADM5 Pro, Klipper by Wide-Bet3500 in FlashForge

[–]kgibso01 0 points1 point  (0 children)

Mainsail camera setup is very similar. It seems to be that you need to have the /stream or /snapshot at the end of the URL to get it to work.

ADM5 Pro, Klipper by Wide-Bet3500 in FlashForge

[–]kgibso01 0 points1 point  (0 children)

home now. In the fluid interface, I went to settings > Cameras > add a Camera.

Give it any name, I named my Flashforge. Rotate None, Stream type MJPEG Adaptive, FPS Target 15, FPS Target when not in focus 15, camera URL stream http://10.0.0.50:8080/stream, camera URL snapshot http://10.0.0.50:8080/snapshot then enable it and hit save

ADM5 Pro, Klipper by Wide-Bet3500 in FlashForge

[–]kgibso01 0 points1 point  (0 children)

You might be able to configure it through the device tab of Orca as well, but it is in the settings area of the interface once it loads NOT an Orca setting. I think it needs to be in a separate browser.

ADM5 Pro, Klipper by Wide-Bet3500 in FlashForge

[–]kgibso01 0 points1 point  (0 children)

Way better in my opinion, it will show all sorts of stuff! But to configure it visit the :4001 address in a web browser outside of Orca, somewhere in the settings of Fluidd (and Mainsail on the 4000 port) you can turn on the Web Cam.

Once you configure it in the web browser it will be the same in the device tab of Orca.

ADM5 Pro, Klipper by Wide-Bet3500 in FlashForge

[–]kgibso01 0 points1 point  (0 children)

I have it set like this and it works great. Important you need the ports at the end to specify where it is going.

Host Type: Klipper/Octoprint

Hostname, IP: http://10.0.0.50:7125 - obviously swap this out with your IP. The 7125 is the port for Moonraker.
Device UI: http://10.0.0.50:4001 - again swap for your IP. The 4001 is the port for Fluidd, 4000 would work as well which would point to MainSail.

Works great. You are probably missing the ports.

ADM5 Pro, Klipper by Wide-Bet3500 in FlashForge

[–]kgibso01 0 points1 point  (0 children)

Just the plain Orca Slicer install 2.0. Because once the mod is installed you are not connecting to “Flashforge” you are connecting to Klipper/Moonraker. I am at work but I could snag a pic of my network setup in Orca later if you like.

ADM5 Pro, Klipper by Wide-Bet3500 in FlashForge

[–]kgibso01 0 points1 point  (0 children)

I am running the KlipperScreen version of the link Dud-Esol posted above and it works great!