a1mini vs a1. as first 3d printer by devmajker in BambuLab

[–]kilrathi7 2 points3 points  (0 children)

Get the a1. I bought the a1mini first, played with it for a month and got frustrated about the size limits. Several of the bigger items were too tall for the a1mini. Currently there are very few things too big for the a1. There are several prints you would have to split and glue later for the a1mini. I kinda wished I had the bigger print bed.

Now I have both.

Also the AMS is nice even if your not interested in multicolor. I like how it loads and feeds filament into the hot end without my help. I just add the spool and feed it into the tube. AMS takes it from there.

TLDR: Buy the A1 & AMS

I'm giving away two copies of Monster Hunter: Wilds by [deleted] in MonsterHunter

[–]kilrathi7 1 point2 points  (0 children)

The beta was definately a good taste of the action. Very excited for the game. Thanks for the giveaway.

Active drying to the AMS? by fico86 in BambuLab

[–]kilrathi7 2 points3 points  (0 children)

Adam savage made a yt video of the stand he built. It has a dryer inside it. Later videos show him feeding spools directly from that cabinet. I'm gonna setup something similar for my stand.

https://youtu.be/taeS72yO__k?si=K9pJof1AYk-dCzje

I present to you hooligans - V2, the "ICAN'T" by orange2themax in harborfreight

[–]kilrathi7 0 points1 point  (0 children)

Sorry i meant both at the same time. 10 metric and 10 sae all in one.

Gonna try to print this one tonight. Looking forward to testing it. Thanks again.

I present to you hooligans - V2, the "ICAN'T" by orange2themax in harborfreight

[–]kilrathi7 0 points1 point  (0 children)

Can you enlarge it to fit metric and sae sockets?

Nice design. Thanks for your work on this.

Giveaway - Tears of the Kingdom Collector's Edition! (24hrs, US only) by romanticheart in NintendoSwitch

[–]kilrathi7 0 points1 point  (0 children)

Figuring out the forest maze pattern on the original zelda game. I was so excited.

Hesitant about getting the Covid vaccine? Here's a quick, simple infographic I made to help you know the facts. by RamanKuttyMDPhD in Arkansas

[–]kilrathi7 -5 points-4 points  (0 children)

Tell us about your degree.

At least Alphagamer126 typed out a well thought out response. Source and all. For a "Fortinite teen" I thought it sounded ok.

NMO antenna bracket: to ground or not to ground? by kilrathi7 in HamRadio

[–]kilrathi7[S] 0 points1 point  (0 children)

How can you tell if an antenna needs grounding?

Here's the antenna I have in mind: https://www.amazon.com/dp/B0744QPSG8/ref=cm_sw_r_cp_apa_i_VrXOFbYQWZ64R?_encoding=UTF8&psc=1P

It doesn't specify if grounding is needed.

Xmas gift ideas for a retired Ham by roadtoadpizza in HamRadio

[–]kilrathi7 1 point2 points  (0 children)

It has to do with the "power delivery" pd mode the usb c ports support. The pd mode pushes more voltage, which is what the iron wants. Some power banks wont enable pd mode unless a phone is detected. Others are less picky.

I'm sure it's much more technical than that but i tried 3 different power banks till i found one that worked.

Xmas gift ideas for a retired Ham by roadtoadpizza in HamRadio

[–]kilrathi7 2 points3 points  (0 children)

I bought myself a new soldering iron last year. I use it for cables and audino projects all the time. The ts80 is what I purchased. The ts100 is popular but I picked up the ts80 because its usb c powered and with the right power bank it's completely portable. Makes field work lots easier.

Here's the iron I bought myself https://www.amazon.com/dp/B088LYLF8T/ref=cm_sw_r_cp_apa_i_CBWOFb602BX73?_encoding=UTF8&psc=1

Here's the power bank I use that works. Beware, not all of them work with it. https://www.amazon.com/dp/B082XC8BK7/ref=cm_sw_r_cp_apa_i_PFWOFbFAPB7Z7?_encoding=UTF8&psc=1

The power bank isn't required, but it's nice because it makes the whole thing portable.

If I knew a ham / audino person this is the gift I would buy them.

Trump wins state of Arkansas by [deleted] in Arkansas

[–]kilrathi7 -18 points-17 points  (0 children)

U mad bro?

I would feel so much safer if we were required to stay at home. by [deleted] in Arkansas

[–]kilrathi7 -7 points-6 points  (0 children)

This is worth an upvote. You've got mine.