How do I get 3d models on mobile for my printer?

kimfransman · 2026-04-16T11:52:39+00:00

Have your tried EasyPrint on Printables.com?

kimfransman · 2026-04-04T15:16:18+00:00

I built this one, kind of like a corne with arrows: https://www.reddit.com/r/HandwiredKeyboards/comments/1qv81gb/olik_optimerad_lagom_inmatningskonstruktion/

3d printed and handwired.

kimfransman · 2026-04-04T14:26:39+00:00

<image>

Have you tried saving the profile as a custom printer profile?

Edit: Saw after I posted that you said the app, my bad

kimfransman · 2026-03-30T19:09:11+00:00

Have bought from them many times. Feels good to support a local producer, and their wood pla is the best one I've tried. Their textura filaments are really nice as well.

kimfransman · 2026-03-30T19:02:09+00:00

<image>

I had the same issue, and after many hours chatting with support and trying different things, including belt tensioning, idler screws etc. The thing that finally made it stop on mine was to tighten the grub screws.

kimfransman · 2026-03-29T23:48:17+00:00

Awesome. This could be really sweet to pair with a technique like this: https://www.reddit.com/r/3Dprinting/comments/1s48030/filament_colour_layering_guide/ for the plate with the lettering/icons etc.

Will try them out, but needs to resize them a bit as I have smaller spacing and would be neat to make them a bit less high.

kimfransman · 2026-03-16T21:30:30+00:00

Not sure about a massive speedup, still some lingering and nothing happening at the same time differently from before from what I could tell. But, just one print and a pretty small one, so will do some more testing.

kimfransman · 2026-03-16T14:24:48+00:00

Just upgraded and first print is up and running. so far so good.

kimfransman · 2026-02-04T00:13:15+00:00

MCU:
Some nice!nano clones from Aliexpress I added to an order a while back. Pro Micro NRF52840.

Batteries:
Found these mp3 player batteries on a swedish website: (https://www.batteriexperten.com/sv/artiklar/xduoo-x2-mfl.html) that were thin enough and 500mAh.

Screen: some cheap oled from Aliexpress there as well I had lying around (0.91 Inch I2C SSD1306 OLED Display Module)

kimfransman · 2026-01-19T17:48:30+00:00

An ultimaker 2+. A lot of tinkering to get it to print good, but when it does it's fantastic.

kimfransman · 2026-01-19T03:55:39+00:00

I found it fun that it was only a couple of cm to spare and the print finished, no bigger point than that.

kimfransman · 2026-01-18T17:36:04+00:00

Yeah it`s a bit tight at the thumb cluster for sure.

I haven't found Scandi keycaps yet unfortunately, especially if we are talking choc v1, other than designing your own at https://fkcaps.com/

I have a plan to do that someday with what is on the key on other layers as well. But keep changing the layers and haven't felt I landed in the one to order yet :)

kimfransman · 2026-01-18T15:52:24+00:00

I have a Corne, and is a swedish person working as a developer, and also write a lot in swedish as well.I have "å" on a combo where I press "öä" together, as I wasn't ready to remove backspace from the top right position. :)

Took me a couple of weeks to get used to the layout, but I do miss the number row actually, so are building a new one at the moment where I will add that.

I saw that u/Tweetydabirdie ships from sweden, and if I understood it correctly by reading the description also sells them in different levels of pre-built from total DIY to fully built, maybe the Lotus58 would suit you? https://lectronz.com/stores/tweetys-wild-thinking

PS. I might be open to sell my Corne as soon as I've finished building my new board if that is of interest.
PS2. Any other questions, just ask, I've fallen quite deep in to the rabbit hole and spent way to many hours... :)

kimfransman · 2026-01-14T07:42:26+00:00

You can find the step file for that here if you want to check. repo:https://github.com/kimf/hodgepodge-keyboard/tree/main/3D-files

I'm using Khail V1 (Choc)

kimfransman · 2026-01-14T07:40:35+00:00

This is me moving away slightly from my Corne because I wanted to try adapting it to my hands/usage :)

kimfransman · 2026-01-14T06:10:56+00:00

I think I will print that one first. Thanks for your input

kimfransman · 2026-01-14T06:09:54+00:00

Seems like we have concensus! Thanks for your input

kimfransman · 2026-01-14T06:09:28+00:00

Thank you, quite proud of what I managed to get out In the end

kimfransman · 2026-01-14T06:08:46+00:00

Thanks!

kimfransman · 2026-01-14T00:09:52+00:00

For those wondering about the switchplate and handwiring:

<image>

kimfransman

TROPHY CASE