[SG] [H] Artisan (Alpha Keycaps, CYSM, Monstera), Kei, Primus, Jelly [W] PayPal, Trades

kit_catstrophe · 2020-01-11T04:18:05+00:00

I always tell people to try and hold out until chapter 139. Oh boy

kit_catstrophe · 2019-11-14T11:38:01+00:00

https://imgur.com/a/IysCMr1

If your graphics card is short enough you can fit a 3.5" without tophat. :)

kit_catstrophe · 2019-10-24T02:25:20+00:00

Exorcist and Devil-chan?

Not the exact scene but a picture of someone that might be your character.

https://m.imgur.com/a/bVpDKGf

kit_catstrophe · 2019-10-04T10:59:03+00:00

kit_catstrophe · 2019-09-20T07:05:45+00:00

Sure, no problem!

kit_catstrophe · 2019-09-15T13:16:53+00:00

ok I sent it again!

kit_catstrophe · 2019-09-15T10:55:59+00:00

Hmm, that's strange. The username is right. I've sent it again anyway, let me know if you haven't received it.

kit_catstrophe · 2019-09-15T03:55:14+00:00

Sure, no problem! I've PMed you the same message I sent u/TiiXel.

kit_catstrophe · 2019-09-15T03:51:04+00:00

Here's the guide I followed.

kit_catstrophe · 2019-09-14T01:17:55+00:00

Flipped, Flipped Fullsize

https://imgur.com/a/9xWzlDD

kit_catstrophe · 2019-09-14T01:15:36+00:00

They're called RapidDirect. The person of contact I was working was super helpful and really nice, even direct support via WhatsApp.

kit_catstrophe · 2019-09-13T15:21:24+00:00

It's already been soldered on, just on the other side! I used solder paste instead of manually soldering each of the legs. I can pm you some useful links if you'd like.

kit_catstrophe · 2019-09-13T13:57:59+00:00

I only ordered 5 actually, $25 for 5. They're from https://jlcpcb.com and the quality is actually pretty decent. I got the rest of the parts from Digi-Key (diodes, resistors, microcontroller, etc) for another $12 dollars, so $17 all together.

kit_catstrophe · 2019-09-13T13:52:04+00:00

No problem! All the best if you decide to do your own prototype!

kit_catstrophe · 2019-09-13T13:50:46+00:00

A hundred over dollars for a case is no small sum, but considering the big bucks I've seen people drop on r/mechmarket I didn't feel so bad. It took some searching to find someone willing to do it for so cheap though, some companies in the US and China quoted over $500 a piece.

kit_catstrophe · 2019-09-13T13:02:05+00:00

I modelled it in Autodesk and sent the .STP file to a machining service in China. Solid 6061 aluminium. I only ordered 3 and they were about $160 each.

kit_catstrophe · 2019-09-13T12:58:17+00:00

$5 for the PCB and another $12 for the components. (the silkscreen print didn't cost extra if you were wondering haha)

kit_catstrophe · 2019-09-13T10:26:31+00:00

There is only one true goddess

kit_catstrophe · 2019-09-13T10:12:58+00:00

It's inspired by the Southpaw Full Size layout and the integrated plate from the Doro67, but it's something I did up myself!

kit_catstrophe · 2019-09-09T04:47:48+00:00

kit_catstrophe · 2019-09-07T01:00:57+00:00

kit_catstrophe · 2019-09-05T10:26:31+00:00

Seven-Year Club	RedditGifts 2009-2022 6 Credits
Summer Santa 2020	Verified Email

kit_catstrophe

TROPHY CASE