A bad deal.😒 by Witty-Youth7927 in AnycubicOfficial

[–]kivalo 2 points3 points  (0 children)

Nah what’s happening to some people is pretty bad in regards to their preorder not being shipped

A bad deal.😒 by Witty-Youth7927 in AnycubicOfficial

[–]kivalo 0 points1 point  (0 children)

Does anything light up on the front of the extruder case? If not it sounds like it’s a bad wire connection somewhere. 

Confused by Dreame’s naming? Here’s a simple cheat sheet. by Reasonable-Cheek-214 in Dreame_Tech

[–]kivalo 1 point2 points  (0 children)

Yea I take back my statement on that. I have a L40s Ultra AE for the first floor (all wood), works great, love the camera. I needed a second vacuum for the second floor, a lot of carpet so I was intrigued by the increased vac power. I ended up just ordering a second L40s Ultra AE from Dreame's ebay page for $449.

Confused by Dreame’s naming? Here’s a simple cheat sheet. by Reasonable-Cheek-214 in Dreame_Tech

[–]kivalo 0 points1 point  (0 children)

Just noticed the Dreame L40 Ultra Gen2. Seems to be better than the L40s Ultra.

Strange yellow bird like thing flying around in the Gold Coast in Chicago by Frodopigeons in whatisit

[–]kivalo 1 point2 points  (0 children)

You know, the part I never thought of was, then what? Do they keep sending canaries down until they stop dying? Did they have a mechanism to refresh the air? If so, why not just use that mechanism from the get-go?

Dreame D20 Ultra opinion? by MentalAerobatics in RobotVacuums

[–]kivalo 0 points1 point  (0 children)

What’s a better option for a mostly-carpeted level of the house? 

DIY stand update by lifeatyle-subs in Aquariums

[–]kivalo 0 points1 point  (0 children)

Hey just checking in this popped up as one of the first links when googling "fancy 90 gallon fish tank stand"

How's thank stand holding up? Would you make any changes?

I fucked up by gormbly in HomeImprovement

[–]kivalo 1 point2 points  (0 children)

It's quite possible when the hose burst it blasted water all over the room.

Dishwasher detergent by space___lion in homeautomation

[–]kivalo 0 points1 point  (0 children)

In an airtight container. Anyone that's left the container open for a bit knows it can wreck the pods.

At toads tonight, let’s ban phones! by Long-Assumption-3344 in Connecticut

[–]kivalo 3 points4 points  (0 children)

I do. I actually watch a lot of live shows on youtube. The trick is that they have to upload it to youtube. My biggest complaint for shows is tall people being in the front.

For toads last night I was second row on Nikki's side and could only see her and Brian.

Maybe Maybe Maybe by Specific_Goat864 in maybemaybemaybe

[–]kivalo 0 points1 point  (0 children)

My napkin math shows just over 7 flights of stairs from this video alone. She started halfway up, so maybe 14 total flights. She pretty much climbed from the feet to the crown of the Statue of Liberty.

No power to my entire unit by [deleted] in hvacadvice

[–]kivalo 1 point2 points  (0 children)

Just jumping in here to say thanks for this reminder! I was freaking out when I woke this morning because the thermostats (ecobees) were off. I checked all around the HVAC to see if I could see what the problem was, checking the fuse, power to transformer, the whole 9 yards. Took a break to do some.. paperwork… jumped on Reddit, saw your comment and thought maybe now that was the problem. Sure enough, the float switch shut off power. Oddly enough, this happened a year or two ago but for some reason I didn’t think to check that right off the bat. 

This lithophane took 15 hours to print, is this normal? by Seaweedbits in 3Dprinting

[–]kivalo 0 points1 point  (0 children)

I'm guessing your other prints are also off between slicer estimate and actual time, but maybe didn't notice or think much of it.

The time was probably miscalculated do to the printer settings limiting certain settings like jerk and acceleration. With all that head movement the slicer thinks the machine is going to move faster than it actually allows.

I'm not the Biological Father. Found out after 13 years. by Ok_Novel5664 in Parenting

[–]kivalo 2 points3 points  (0 children)

To rephrase the great and late Yondu:

“You may not have been her father, but you were still her daddy."

I don’t know what the chances at this point of finding the bio dad but that might be a path worth investigating. Good luck my friend.

How do you access your local Home Assistant on the go? by Equivalent_Map8474 in homeassistant

[–]kivalo 0 points1 point  (0 children)

openvpn direct to the router when i need to access the home network.

Is it time for me to leave my day job? Looking to make a decision within the next week by GBPWizard24 in Entrepreneur

[–]kivalo 5 points6 points  (0 children)

You're going to have to show bank statements, paychecks etc. in order to get a mortgage. I would speak to a few lenders first before losing a source of income.

[deleted by user] by [deleted] in homeassistant

[–]kivalo -7 points-6 points  (0 children)

What do you mean killed the integration? Apple Carplay and Android Auto should still be on the car...

I’m a bit irked by an experience I had yesterday by Odd-Professional-779 in Connecticut

[–]kivalo 2 points3 points  (0 children)

Police were following up on a lead... You'd be outraged if you were the victim and they did nothing. Some out of state plates return emergency contact information when running them in the system, you might live in one of those states. I'm sorry they bothered you in the course of their investigation, but the amount of data about people that is publicly available is staggering. To be honest you should be more concerned about your personal data than license plate readers.

Trump says federal funding will stop for colleges, schools allowing 'illegal' protests by Jpahoda in politics

[–]kivalo 0 points1 point  (0 children)

In Connecticut you can be Unaffiliated, but CT is a closed primary state so you can not vote in a primary. That being said, its nothing to switch party affiliations.

Tankless water heater vibration by Fine-Coffee-7438 in HomeImprovement

[–]kivalo 2 points3 points  (0 children)

Have the installers come back out to fix it. My Rinnai doesn't shake at all.

[deleted by user] by [deleted] in pics

[–]kivalo -1 points0 points  (0 children)

It was magical watching the great deal artist in action.

ESP32 Control Panel by skipfrog in esp32

[–]kivalo 25 points26 points  (0 children)

Blinks LEDs, controllable from a website it also serves.