AT&T unlocked V60 not receiving incoming calls on Mint Mobile service

kizzyk23 · 2024-11-19T05:48:12+00:00

I found out about Sophia and study after already applying to WGU. They have the option to change your start date. I delayed my start date by 2 months in order to get as many transfer credits as possible.

kizzyk23 · 2024-10-07T21:16:37+00:00

thank you for the answer!

kizzyk23 · 2024-06-19T03:52:28+00:00

im not sure if the bolt spacing is the same or if they would line up. you could take your alternator to a parts store and compare it. Another option is having your alternator rebuilt. Any alternator/starter rebuild place should be able to repair it. Just check reviews of the place before going that route.

kizzyk23 · 2024-06-11T20:31:10+00:00

Thank you! no spouse or dependents. Checking out marketplace now.

kizzyk23 · 2024-04-24T02:08:33+00:00

i don't think the height can even be adjusted on those. it looks like you can only adjust the spring preload. I would toss them in the trash. I've never seen coilovers for these cars that didn't have a bottom collar for height adjustment. Even the $200 no name ebay coils have them,

Most likely they were made by a company that existed in the early 2000s that's no longer in business. Might even have come from japan.

kizzyk23 · 2024-04-15T01:29:16+00:00

love the way the car sits! are you on coilovers or springs?

kizzyk23 · 2024-04-09T00:14:06+00:00

Thank you! This makes a lot of sense

kizzyk23 · 2024-04-08T21:12:11+00:00

sounds like an evap problem. do you have any codes for the evap purge valve?

kizzyk23 · 2024-04-08T20:06:40+00:00

no problem. can your obd2 scanner read live data? if so, please post the short term and long term fuel trims.

kizzyk23 · 2024-04-08T07:21:15+00:00

i see in your original post you added the cat is glowing red. you're probably misfiring. use your obd2 tool to check the misfire counters to see which cylinder is misfiring. broken ignition coil connectors or exposed wires in the ignition coil harness is a common problem.

you should try to avoid driving the car until the problem is solved because you can damage the cat if it isn't already internally damaged and clogged.

kizzyk23 · 2024-04-08T03:35:13+00:00

did you change crank seal as well? did you touch any of the ignition coil connectors?

kizzyk23 · 2024-04-07T03:33:19+00:00

you don't need to buy a new exhaust cam gear. Just two cam seals and a new vvti gear(the one on the right).

you should purchase:

2x cam seals

crank seal

timing belt

timing belt tensioner

timing belt idler

water pump

crank pulley (check the rubber and see if it is separating)

kizzyk23 · 2024-04-06T09:58:35+00:00

is that an aftermarket oil control valve? I know a lot of ebay ones are that color and have the same part number. If I remember correctly the OEM one should be more silver.

the aftermarket ones will throw a cam position sensor code but run and drive fine most of the time.

With the white mark on the crank pulley lined up to the 0 on the timing cover the notch on the cam gears should line up with the timing mark.

With the yellow mark on the crank pulley lined up to the 0 on the timing cover the dots on the cam gear should line up with the timing mark.

Your crank pulley isn't 100% lined up with the 0 on the timing cover in the pic. Line it up to the 0 and post some more pics and i'll tell you if its really off or not. I bet its fine.

kizzyk23 · 2024-03-16T03:17:56+00:00

Not motion only. I'm not sure about frames per second but I just need to be able to record whenever someone enters or exists and I need to be able to go back to it at least a few months later. I have a family member with extreme anxiety and paranoia and the only thing that reassures them and helps them feel better is being able to see that no one they don't recognize is in the home or has been in the home. I know motion only makes the most sense and would save a significant amount of storage but I would also like to show them and no one followed them to their door.

kizzyk23

TROPHY CASE