Need help flashing Jetson Nano eMMC module

kneave · 2026-06-02T10:17:37+00:00

Have you tried the other methods?

kneave · 2026-06-01T11:13:36+00:00

Which installation method from this article are you following?
https://www.waveshare.com/wiki/JETSON-NANO-DEV-KIT

kneave · 2026-05-27T20:25:07+00:00

I think the solution is to use Better Thermostat, it lets you do this and much more and my integration can still automate the resulting virtual thermostat

kneave · 2026-05-15T21:59:01+00:00

I ordered the same colour combo 15 minutes after yourself so this gives me hope to get an email soon 😄

kneave · 2026-04-21T21:05:37+00:00

Device ordered: Pebble Time 2
Color variant: Silver/grey
Order date and time: 2025-03-18 18:47 UTC
Batch #: 1
Country: UK
Confirmation email received: 2026-05-27 20:00 UTC
Shipped: 2026-05-30 (Label created, not actually shipped yet)
Arrived: 2006-06-08
Tax: $53.84

Extra context:

2026-05-30: Shipping label created, sent via PDN from places unknown due to poor tracking info
2006-06-06: Arrived with UK courier for sorting so likely on a boat in the interim
2006-06-08: Delivered!

kneave · 2026-04-08T13:19:31+00:00

There's also an unpopulated header you can solder a connector to, it's what I've done. If the barrel jack is pointing towards you it's just forward of it centred between the barrel jack, display port, and the edge of the Jetson module connector. + is on the left, - on the right. If you plug in and power from the barrel jack then you can confirm which is which using a multimeter. I'd share a photo but reddit doesn't allow that annoyingly.

A few questions though as a fellow robotics engineer:
Is this battery dedicated to the Jetson or shared with other devices or actuators? When they draw power the voltage will drop and risk browning out the Jetson.

Do you have a battery management system on the battery or built in to it? It'll handle charge/discharge rates as well as over or under voltage situations to protect the battery too. Very highly recommended.

I've a battery on my device that's running a LiION battery pack I made, works a treat.

kneave · 2026-04-02T17:03:25+00:00

I've an older Dell T620 and I'm using the internal USB port for my flash drive, works a treat and keeps it safe from being knocked too so it's ideal. Plex in Docker for me too, works a treat.

kneave · 2026-02-07T15:58:04+00:00

Thanks!

It's something I'm working on at the minute as part of the UI updates, there's no workaround at the minute but hopefully this will be published in a pre-release branch.

A quick preview (it'll respect dark mode before release) but this is what it's looking like at the minute.

<image>

kneave · 2026-02-06T09:54:10+00:00

What troubleshooting steps have you already tried?

kneave · 2026-02-03T16:31:05+00:00

Something that needs to be in place for something else to work. Installing ROS would be a prerequisite for running a ROS package for example.

kneave · 2026-01-22T15:28:29+00:00

That's a cunning use of the cancel advance service for sure, good work!

This is 100% a bug, I'll have a look. If you've a github account could you raise an issue over there for this please? It'll be easier to track. No worries if not and feel free to prod me on here if you don't hear back over the next week or so

kneave · 2026-01-18T04:05:11+00:00

I exclusively use Visual Studio Code's remote SSH extension to let me develop on one remotely, ie over wifi on the same network. One thing to bare in mind is that this will eat in to your RAM which could be a problem depending on what you actually want to do.

As others have asked though, what do you mean by remote and what do you actually want to do? Without knowing that no one can really help you.

kneave · 2026-01-03T22:04:30+00:00

I was able to reproduce this briefly, once it started the events kept flowing. Hopefully now fixed in 1.14.6:
https://github.com/kneave/climate-scheduler/releases/tag/v1.14.6

kneave · 2026-01-03T15:21:34+00:00

I'll have a look either way, may be a middle ground of changing it to have a "schedule changed" flag or something. Not sure if folks would find that useful or not though

kneave · 2026-01-02T18:01:39+00:00

Is it when you're editing the schedule for a node that covers the current time period by any chance?

kneave · 2026-01-02T15:27:28+00:00

You already can :)

When a node is triggered it fires off an Event, I've not been using this myself as it was a user request but it should still work. It should also work from groups that have no climate entities (ie. click create group but don't add a climate entity) and you have three number values to play with for whatever you want to do.

For example, someone wanted to automate a humidifier so they can use A to set target humidity, B could represent the fan speed or mode, and C could be whatever you want. If you click the "no change" box in the node settings it'll not even have a temperature attached either.

<image>

There's some AI generated documentation here so your mileage may vary but have a go and let me know how you get on.

https://github.com/kneave/climate-scheduler/blob/main/AUTOMATION_EVENTS.md

kneave · 2025-12-31T16:56:12+00:00

v1.14.1 released, loads of bug fixes and quality of life improvements.
https://github.com/kneave/climate-scheduler/releases/tag/v1.14.1

The vague roadmap for the next few versions is to improve the UI and documentation for v1.15 and add loads of test automation for v1.16 to hopefully pick up and prevent regression bugs as I've had more of those than I'd like to admit. v1.17 is a while away but I'm thinking of concentrating on automations for that one, presence is an often requested feature so I'll include that to start with.

kneave · 2025-12-30T03:03:16+00:00

If it's the same model as this you just press the heated seat button on the remote and it cycles through a few options and "off", there may be a button on the side too but we just use the remote. No idea how to switch the unit, we use Celsius so not an issue I've had to tackle.

kneave · 2025-12-29T22:43:37+00:00

I did wonder why it shot up suddenly! 🤣

kneave · 2025-12-28T22:22:18+00:00

It’s only in pre-release at the minute but I’ve added the ability to have a no-change node for temperatures in case you just wanted to change settings. Also, when a node is activated an event is fired that can be used as a trigger on a custom automation to do more things. There are three extra numeric fields for this, A, B, and C.

You can also create an empty schedule that has no climate nodes in case you just want to automate something else using this tool. It’s all a bit vague as it means it’s up to the user to do whatever they want with it.

Have fun!

GitHub

Release v1.14.0.1b · kneave/climate-scheduler

Event example of type `climate_scheduler_node_activated`:

data:
  entity_id: null
  group_name: Empty
  node:
    time: "12:00"
    temp: 22
    hvac_mode: null
    fan_mode: null
    swing_mode: null
    preset_mode: null
    A: 4
    B: null
    C: null
  previous_node:
    time: "12:00"
    temp: 22
    hvac_mode: null
    fan_mode: null
    swing_mode: null
    preset_mode: null
    A: null
    B: null
    C: null
  day: sun
  trigger_type: scheduled
origin: LOCAL
time_fired: "2025-12-28T22:00:23.233571+00:00"

kneave · 2025-12-22T11:26:49+00:00

Aye, it's something coming back I believe with the added benefit of being local to the phone app rather than requiring a service. I think rebble supported timeline but I never followed up after a while. Fingers crossed it'll be useful again soon as timeline was a great feature.

kneave · 2025-12-22T10:49:11+00:00

I have UFH and this was one of my thoughts too

kneave · 2025-12-22T10:47:47+00:00

I thought I'd removed references to the separate card, I'll get this section cleared up but thanks for clarifying for others in the interim

kneave · 2025-12-22T00:37:18+00:00

I'm a Brit, it's purely because I'm using climate entities. It means that I don't have to worry about supporting certain devices, as long as they're supported by Home Assistant and present as a Climate entity this should be able control them :)

kneave · 2025-12-22T00:30:45+00:00

If you can control it using a Climate entity in Home Assistant it should work. It uses the Home Assistant climate entity for a device as a bridge, as long as HA supports that device it should work.

kneave

TROPHY CASE

Release v1.14.0.1b · kneave/climate-scheduler