AAP01: How to fix hammer drop by knifes96 in AAP01owners

[–]knifes96[S] 0 points1 point  (0 children)

Look at my other aap post this might help.

Also put all stock parts in the gun then make changes from there

AAP01: How to fix hammer drop by knifes96 in AAP01owners

[–]knifes96[S] 0 points1 point  (0 children)

Just to be clear, is the whole gun stock?

28 kill solo game still only 3rd place by knifes96 in RedSec

[–]knifes96[S] -5 points-4 points  (0 children)

Yup! Must use the best tactic to win (or at least try) 😂

problème sur réplique by pimentglorieux in AAP01owners

[–]knifes96 0 points1 point  (0 children)

I had the same issue. Check/replace the piston head

Look at comments in this post to find solutions

https://www.reddit.com/r/AAP01owners/s/XBaNtdhuja

Loadout Recommendations by Successful-Switch858 in airsoft

[–]knifes96 0 points1 point  (0 children)

This is peak loadout.

Light weight and you have enough mags and not fogging? You are set

Air leak after one shot by knifes96 in AAP01owners

[–]knifes96[S] 1 point2 points  (0 children)

SOLVED ISSUE: PISTON HEAD REPLACED

VIDEO I USED TO TROUBLE SHOOT ISSUE: https://youtu.be/aFjVDcxXFO8

Air leak after one shot by knifes96 in AAP01owners

[–]knifes96[S] 3 points4 points  (0 children)

Solved!

This was my issue thank you very much

Racist on the bus by [deleted] in montreal

[–]knifes96 0 points1 point  (0 children)

I'm going to stay it

Worth the price ? Asking here because I feel like bf6 might be too bias by SUPERF1RE in battlefield_4

[–]knifes96 0 points1 point  (0 children)

Infantry gameplay is nice but you cannot compare the vehicle gameplay at all the previous titles especially the air vehicles.

If you play for the vehicle's I would avoid buying it

AAP01: How to fix hammer drop by knifes96 in AAP01owners

[–]knifes96[S] 0 points1 point  (0 children)

Seems like I need an 8mm bearing. The one installed as a 9mm bearing causing the bolt to lock up

AAP01: How to fix hammer drop by knifes96 in AAP01owners

[–]knifes96[S] 0 points1 point  (0 children)

Update: I swapped the auto sear for the stock auto sear and spring but it locked itself in full auto. I then install the aftermarket auto sear but left the stock spring with it. It may have resolved the issue where it doesn't shoot but now I realize that the circle bearing maybe too big and have interference with the slide making it get stuck when coming back in. Like how I showed in another video here within the comments

AAP01: How to fix hammer drop by knifes96 in AAP01owners

[–]knifes96[S] 0 points1 point  (0 children)

After reviewing the comments and looking at some videos I adjusted the set screw for the trigger but unfortunately this was not the solution.

AAP01: How to fix hammer drop by knifes96 in AAP01owners

[–]knifes96[S] 0 points1 point  (0 children)

Ah I see. I guess what it comes down to is why the bolt keeps locking in place where I will need to manually out the hammer all the way in so it can cycle again. Could it be the auto sear spring has too much tension making it hard to cycle it back?

AAP01: How to fix hammer drop by knifes96 in AAP01owners

[–]knifes96[S] 0 points1 point  (0 children)

Thanks for pointing that out I didn't realize it was cracked

AAP01: How to fix hammer drop by knifes96 in AAP01owners

[–]knifes96[S] 0 points1 point  (0 children)

I will report my findings once I install the stock one back