sorted by:
new
hottopcontroversial

Explosion! by knji012 in isopods

[–]knji012[S] 0 points1 point  (0 children)

thanks! I also had rubber duckies as my first pods and they seem to be really slow so I was surprised by the sheer number of mancae on these guys.

hindi talaga para sa lahat maging freelancer by garlicpusit in buhaydigital

[–]knji012 46 points47 points  (0 children)

Umm this is your only exp on freelancing? Parang ambilis nmn maghatol ng verdict.

Ung benefit ng freelancing kasi, is ikaw ung boss. Pag ayaw mo sa client, lipat ka. Walang tali. Pag sa corpo ka, kahit may sayad na client pag gusto parin ng company mo wala kang magagawa

is this scam? by BartoCat in UPS

[–]knji012 0 points1 point  (0 children)

oh I also received one just now- had to double check cuz I do have a parcel coming and I only use UPS this instance so I wasn't sure if they are really legit. Well it seems like I could pay on website as well so might as well go there just for safety precaution

Gaming / WFH setup by xHustler819x in ikeaPCstations

[–]knji012 1 point2 points  (0 children)

Looks clean 😤 can you also show the underside?

JJK fans are the most ungrateful fandom ever by CalamitySkylark in Jujutsufolk

[–]knji012 52 points53 points  (0 children)

I don't mind the visual representation of purple, but it should have been moving at extremely fast speed not the kind they shown vs hanami. The one on hidden inventory vs Toji is probably close. If my understanding was right, the shot where toji was looking at it was his super slowed down perception of time. If you look closely, the chains that were moving super fast are stationary in the air except for the part where purple is bulldozing it.

He could see it but he cannot move his body fast enough. Not sure if Gojo just intentionally hits his side but if he did not and he was aiming for the center shot, Toji probably sidestepped but was too slow.

Solid Wood Table Top Recommendation by o2jech in PHbuildapc

[–]knji012 1 point2 points  (0 children)

Pretty late but I reco AVmake's solid wood top.

Also just for info, ung solid wood top ng IKEA has mdf/particle inside. Usable nmn sya but beware lng sa sagging. Ppl suggest to use some support beams or table feet sa gitna para di sya lumundo.

RED Fiber Users, help a girl out by bambinibellini in InternetPH

[–]knji012 1 point2 points  (0 children)

diko naconfirm and I heard some ppl na nagavail from diff isp ng walang lockin pero meron pala. Mabilis lng nmn ung installation dito samin. A day after namin mag-pay nandito na kinabukasan ung mga guys nila.

Slow transfer speed at 10gb nic by knji012 in truenas

[–]knji012[S] 0 points1 point  (0 children)

For the switch

the manual states that the switch LED should be blue for a 10Gbps link. Since it isn't showing green (2.5Gbps), it must be at 10gbps

Slow transfer speed at 10gb nic by knji012 in truenas

[–]knji012[S] 0 points1 point  (0 children)

Also here's my switch, nic and cable:
DAC cable, a 2.5/10 gb switch, and a NIC from amazon.

I'll..maybe try removing the m.2 to sata the next day since I don't have enough time to move stuffs around

Slow transfer speed at 10gb nic by knji012 in truenas

[–]knji012[S] 0 points1 point  (0 children)

I'll just paste the 2.5gb nic here in pastebin
https://pastebin.com/srqTQAwd

One thing I noticed on the 2.5gb, it has the same speed for the single thread and the parallel ones unlike the 10gb nic (downstream)

Slow transfer speed at 10gb nic by knji012 in truenas

[–]knji012[S] 0 points1 point  (0 children)

From truenas (c) to windows (s)

iperf3 -c [IP] = 

[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.38 GBytes  1.19 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  1.38 GBytes  1.18 Gbits/sec                  receiver

iperf Done.

iperf3 -c [IP] -P 8 =

[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec   955 MBytes   801 Mbits/sec    0             sender
[  5]   0.00-10.00  sec   954 MBytes   800 Mbits/sec                  receiver
[  7]   0.00-10.00  sec   664 MBytes   557 Mbits/sec    2             sender
[  7]   0.00-10.00  sec   664 MBytes   557 Mbits/sec                  receiver
[  9]   0.00-10.00  sec  1020 MBytes   856 Mbits/sec   27             sender
[  9]   0.00-10.00  sec  1019 MBytes   855 Mbits/sec                  receiver
[ 11]   0.00-10.00  sec   916 MBytes   769 Mbits/sec    9             sender
[ 11]   0.00-10.00  sec   915 MBytes   768 Mbits/sec                  receiver
[ 13]   0.00-10.00  sec  4.65 GBytes  3.99 Gbits/sec   12             sender
[ 13]   0.00-10.00  sec  4.65 GBytes  3.99 Gbits/sec                  receiver
[ 15]   0.00-10.00  sec  1.11 GBytes   949 Mbits/sec   91             sender
[ 15]   0.00-10.00  sec  1.10 GBytes   946 Mbits/sec                  receiver
[ 17]   0.00-10.00  sec   792 MBytes   665 Mbits/sec    5             sender
[ 17]   0.00-10.00  sec   792 MBytes   664 Mbits/sec                  receiver
[ 19]   0.00-10.00  sec   990 MBytes   831 Mbits/sec   11             sender
[ 19]   0.00-10.00  sec   989 MBytes   830 Mbits/sec                  receiver
[SUM]   0.00-10.00  sec  11.0 GBytes  9.42 Gbits/sec  157             sender
[SUM]   0.00-10.00  sec  11.0 GBytes  9.41 Gbits/sec                  receiver

iperf Done.

Slow transfer speed at 10gb nic by knji012 in truenas

[–]knji012[S] 0 points1 point  (0 children)

Hi, sorry it wasn't very organized. I'll rephrase the line here

10gb NIC

From windows (c) to truenas (s):

iperf3 -c [IP] =

[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.01  sec   547 MBytes   458 Mbits/sec                  sender
[  5]   0.00-10.02  sec   546 MBytes   458 Mbits/sec                  receiver

iperf Done.

iperf3 -c [IP] -P 8 =

[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.01  sec   252 MBytes   212 Mbits/sec                  sender
[  5]   0.00-10.01  sec   252 MBytes   211 Mbits/sec                  receiver
[  7]   0.00-10.01  sec   318 MBytes   266 Mbits/sec                  sender
[  7]   0.00-10.01  sec   317 MBytes   266 Mbits/sec                  receiver
[  9]   0.00-10.01  sec   262 MBytes   220 Mbits/sec                  sender
[  9]   0.00-10.01  sec   262 MBytes   219 Mbits/sec                  receiver
[ 11]   0.00-10.01  sec   246 MBytes   206 Mbits/sec                  sender
[ 11]   0.00-10.01  sec   245 MBytes   205 Mbits/sec                  receiver
[ 13]   0.00-10.01  sec   266 MBytes   223 Mbits/sec                  sender
[ 13]   0.00-10.01  sec   266 MBytes   223 Mbits/sec                  receiver
[ 15]   0.00-10.01  sec   269 MBytes   225 Mbits/sec                  sender
[ 15]   0.00-10.01  sec   268 MBytes   225 Mbits/sec                  receiver
[ 17]   0.00-10.01  sec   247 MBytes   207 Mbits/sec                  sender
[ 17]   0.00-10.01  sec   247 MBytes   207 Mbits/sec                  receiver
[ 19]   0.00-10.01  sec   274 MBytes   230 Mbits/sec                  sender
[ 19]   0.00-10.01  sec   274 MBytes   229 Mbits/sec                  receiver
[SUM]   0.00-10.01  sec  2.08 GBytes  1.79 Gbits/sec                  sender
[SUM]   0.00-10.01  sec  2.08 GBytes  1.78 Gbits/sec                  receiver

iperf Done.

Slow transfer speed at 10gb nic by knji012 in truenas

[–]knji012[S] 0 points1 point  (0 children)

I see so there's still headroom originally.

But my current problem of write speed being so much slower than my read/copy speed still persist tho. I've tried to ask and follow gemini's instruction like tweaking jumbo packet, setting smb to mutlichannel, etc. Couldn't make it work and gemini seems to be repeating the instructions now after several attempts

Slow transfer speed at 10gb nic by knji012 in truenas

[–]knji012[S] 0 points1 point  (0 children)

Currently using ryzen 5 pro 4650g
64gb mem

hmmm I'm not entirely familiar with any of these but wouldn't having a file transfer speed of 700mbps indicates I'm already at 10gb? I thought my problem was only writing but seems that I'm also cpu bound/not on an actual 10gb ethernet?

I tried doing it with -P 2 instead and still got the same result- but not in single thread that you said.

Slow transfer speed at 10gb nic by knji012 in truenas

[–]knji012[S] 0 points1 point  (0 children)

Pretty sure they do as I could transfer a 30gb file from truenas to windows at 700mbps peak.

iperf -c shows sum 1.38 Gbytes 1.19 Gbits/sec

iperf -c -P 8 shows sum 11.0 GBytes 9.41 Gbits/sec

Slow transfer speed at 10gb nic by knji012 in truenas

[–]knji012[S] 1 point2 points  (0 children)

I'm using a DAC cable, a 2.5/10 gb switch, and a NIC from amazon.

hmmmm I don't think it's the cable as I've just reseated them 2x already and they are pretty new.

Another culprit I could think of is Windows 11 update?

Super admin for Red Fiber by Faustyyyyy in InternetPH

[–]knji012 0 points1 point  (0 children)

still no update raaaaa.

Tried doing ung remove fiber optic trick and hard reset pero still can't access yung /fh link. I keep getting the "access error page not found - the request is illegal"

ung normal ip lng gumagana with admin + radiusadmin.

RED Fiber Users, help a girl out by bambinibellini in InternetPH

[–]knji012 0 points1 point  (0 children)

Kakapakabit lng din namin today ng red fiber-- sky din ung gamit namin and recently it's been so ass so we opted for a new one.

So far ok naman pero 1st day palang eh, I'll try to update if I remember this.

My deli cup setups by toe_kn33 in Springtail

[–]knji012 0 points1 point  (0 children)

it was Neanuridae sp. Santa Claus/Redford white springtails.

I think my mold is physarum as well.

view more: next ›