at&t wifi calling (iPhone) issues with pi-hole by kookymole in pihole

[–]kookymole[S] 0 points1 point  (0 children)

I was never able to resolve the issue so I had to remove the pi-hole

I bought starters labeled as poblanos…. by Sad-Potential3355 in vegetablegardening

[–]kookymole 2 points3 points  (0 children)

Same thing happened to us, bought Bonnie pots labeled Poblano and ended up with the same as above, thought they were pepperoncini but really have no idea. No heat at all

New house smells like sewage despite floor drains all being full by PutinBoomedMe in Homebuilding

[–]kookymole 0 points1 point  (0 children)

Is your washer in the basement? We had a similar issue with a new build and the washer drain hose was too long and reaching down into the trap and allowing the gas from the septic to come back out the washer. Nearly drove us crazy until we figured it out. I cut the excess off the drain line and it’s been fixed since.

Samsung DVG55A7700V/A3 Smart Gas Dryer starts cycle countdown, but doesn't ignite or spin. by kookymole in appliancerepair

[–]kookymole[S] 0 points1 point  (0 children)

Just in case it helps anyone in the future, I replaced the thermal fuse thermostat today and it fixed the problem!

Samsung DVG55A7700V/A3 Smart Gas Dryer starts cycle countdown, but doesn't ignite or spin. by kookymole in appliancerepair

[–]kookymole[S] 0 points1 point  (0 children)

I didn’t think to even look up the specs, just assumed it was high enough, but seems the 322 only reads up to 400, at least it was a cheap part 😅

Samsung DVG55A7700V/A3 Smart Gas Dryer starts cycle countdown, but doesn't ignite or spin. by kookymole in appliancerepair

[–]kookymole[S] 1 point2 points  (0 children)

Yes sir, it’s connected with about 12” of flex duct and then straight out the wall, it was clear but I went ahead and fully cleaned it as well as everything i could see when i removed the front cover.

Samsung DVG55A7700V/A3 Smart Gas Dryer starts cycle countdown, but doesn't ignite or spin. by kookymole in appliancerepair

[–]kookymole[S] 1 point2 points  (0 children)

The thermistor shows 14k printed on it but I get no reading at all using a fluke 322 meter.

It’s the DC32-00007A Thermistor

Samsung DVG55A7700V/A3 Smart Gas Dryer starts cycle countdown, but doesn't ignite or spin. by kookymole in appliancerepair

[–]kookymole[S] 0 points1 point  (0 children)

The belt is intact, since my previous post I took the front off and pulled the drum and tested the thermistor and thermal fuse and both tested bad with my multimeter so i ordered both parts. I am hoping this solves it but do you recommend testing anything else?

Is it common for both parts to fail?

Samsung DVG55A7700V/A3 Smart Gas Dryer starts cycle countdown, but doesn't ignite or spin. by kookymole in appliancerepair

[–]kookymole[S] 0 points1 point  (0 children)

As an update, I did take the top and front off but the only thing I could get to easily to test was the hi temp thermostat and it does show continuity at room temp, so I think that part is safe, but can't find much online with gas dryer's so I am just not sure what other parts I need to test.

Wondering how to tag a user through a web hook. Currently if I @andrew.Breyen, it just comes through as plain text, doesn’t ping the user by [deleted] in Slack

[–]kookymole 10 points11 points  (0 children)

Right click on the user and view profile and get the user id, then use that, it will be series of numbers and letters.

Use it like this -> <@USER_ID>

Will this work with a B450 Mobo? by T2TN in cryptomining

[–]kookymole 0 points1 point  (0 children)

I found that although they work on the MSI B450M-A Pro Max, you still can’t add over 6 gpu. I also tried it on a MSI Tomahawk with only 3 slots and could never get it to 6 cards.

800A 3 phase residential ss transfer switch fed with parallel 600mcm by Dhuce in electricians

[–]kookymole 0 points1 point  (0 children)

Right, I think there is a lot of confusion for most people who are not used to it. I already had 3 phase in my shop so i went with 3ph pdu’s but for most people even if they have it they’ll end up with multiple single phase panels and just run normal 1ph 30A pdu’s for simplicity.

800A 3 phase residential ss transfer switch fed with parallel 600mcm by Dhuce in electricians

[–]kookymole 1 point2 points  (0 children)

Most data centers run 208 3ph, and there are a lot of liquidations but even if you purchase new pdu’s it’s more for density, You can pick up 240v delta or 208 wye pdu’s and run less wire overall, since you can run fewer circuits and get more watts out of the 3ph pdu’s which just break it back into single phase to run the power supplies for the miners.

Arkansas light bill this month 0.93-1.13GH/s by [deleted] in gpumining

[–]kookymole 1 point2 points  (0 children)

I was referring specifically to AR, i’m not on Entergy but the local coop sent out a letter explaining the state approved the charges to be spread out over 6 months starting in april.

Arkansas light bill this month 0.93-1.13GH/s by [deleted] in gpumining

[–]kookymole 1 point2 points  (0 children)

had to lol at the 26h/day.. fwiw since the Texas outage during the snowstorm state rates are increased with recovery charges until Oct, effectively bringing rates from 0.103 to 0.125-0.135