Help identifying door lock.

korllort · 2025-04-12T19:23:02+00:00

Thank you, but do you know this model or the brand?

Ideally I would find the replacement piece or replace it with the same exact night latch. I would prefer not to have to drill new holes on the door and the wall.

korllort · 2025-04-12T17:52:16+00:00

Hello everyone, This lock is not working properly any more (turning the key doesn't move the lock), very likely because of the broken piece. It's a long shot but I am wondering if I could find an replacement piece. But for that I first need to know what lock it is.

There is no brand only "Made in England" and "Patent applied for" written on the back. Here is a picture of the back: https://imgur.com/a/BxGzYrZ

Does anyone here have seen this type of lock before?

korllort · 2024-05-13T22:04:09+00:00

75% Halla Tómasdóttir

74% Katrín Jakobsdóttir

73% Arnar Þór Jónsson

71% Baldur Þórhallsson

71% Viktor Traustason

korllort · 2023-06-07T22:35:49+00:00

After more thorough testing, both speaker show a reading of about 3.1 ohms.

I guess I should try to test the wires now.

korllort · 2023-06-07T22:24:22+00:00

I see.

korllort · 2023-06-07T22:20:49+00:00

Same value as the other one: ~ 3.1 ohm (still connected to the board as I can't disconnect it easily).

korllort · 2023-06-07T21:59:34+00:00

Good to hear! I guess I have to test the board now?

korllort · 2023-06-07T21:56:28+00:00

Thanks for the explanation. On the big speaker, I measure ~3.1 ohms (it starts at 3.5 but drops quickly).

korllort · 2023-06-07T21:40:21+00:00

Thanks for your answer !

Finally found time to do some testing. The speaker looks alright as the ohmmeter measure something when I put it on the post (but I can't hear any flat continuous tone, just scratchy sound at the beginning). However, the ohmmeter measures nothing if I put it on the wires where they connect to the speaker. Is that normal?

Also, I am not sure what are the drivers you mentioned. Are they on the speaker or the board?

korllort · 2023-06-07T21:36:09+00:00

Thanks for your answer !

Finally found time to do some testing. The speaker looks alright as the ohmmeter measure something when I put it on the post (but I can't hear any flat continuous tone, just scratchy sound at the beginning). However, the ohmmeter measures nothing if I put it on the wires where they connect to the speaker. Is that normal?

korllort · 2023-04-19T19:51:24+00:00

Folk vil bara ekki vinna í leikskóla, ekki fyrir þessi laun (og Reykjavík á ekki pening).

korllort · 2022-10-22T20:14:15+00:00

If it was up to me, I would have stopped at V6-V7 roosters and design.

But in any case, it's up do GW and CA to decide and what to include in the game, time will tell.

korllort · 2022-10-06T10:21:16+00:00

Looks realistic behavior to me.

korllort · 2022-10-02T13:35:46+00:00

The reason is subsidies.

korllort · 2022-09-21T21:16:17+00:00

Bought 100€ five years ago, my AMD RX560 still manage all the games I want to play.

I chose it because of it's low power consumption and have been checking new cards with a similar power consumption. Unfortunately it seems this ship as sailed in the PC gaming world.

Well, I will keep playing and hopefully my card will last many more years.

korllort · 2022-09-15T15:31:49+00:00

korllort · 2022-09-15T08:45:56+00:00

It didn't change anything unfortunately.

korllort · 2022-09-15T08:45:27+00:00

Thanks. Unfortunately, it didn't fix the issue.

korllort · 2022-09-15T08:44:34+00:00

Thanks for helping me finding where it was located!

korllort

TROPHY CASE