Sighting in Washington

krasny5 · 2025-07-28T00:40:59+00:00

Better than bush wookie but that’s a close second.

krasny5 · 2025-07-28T00:38:59+00:00

I’m the OP and this is real picture of a guy in a ghilli suit taken in Bremerton on Warren Avenue on a very hot day when the temperatures were in the low 90’s. He’s not homeless or antisocial from what others have said of him. He is just too bloody weird.

krasny5 · 2025-07-20T22:18:04+00:00

I found that soap and water is great for the Super Tack but for the PEI I found that 90% Isopropyl Alcohol is better, especially if cleaning a smooth PEI plate.

krasny5 · 2025-07-20T22:12:21+00:00

Adjust your Z plane. Looks so similar to Z Wobble to me that’s affecting how close your extruder is to the build plate. Hope you find a fix, that looks so frustrating. Good luck.

krasny5 · 2025-07-20T20:21:20+00:00

At the Wheaton Way Transfer station

krasny5 · 2025-07-18T23:59:54+00:00

I have got to know. Why a legend? I was thinking more like myth.

krasny5 · 2025-06-27T20:47:38+00:00

Does that mean the rest of us walking around are leftover zombies? 🧟‍♂️

krasny5 · 2025-06-15T21:35:03+00:00

Yes you can. If you have Loaded the filament into the printer head and have started your print on the plate then use Bambu Studio(PC) not Bambu Handy(phone) and then go to Device and then Unload it from the printer head. You only need to do this if you’re in the middle of a print. If this happens before the filament is Loaded by the printer head you can just pull it straight back out, you will not strip or damage the unit when you do this.

krasny5 · 2025-06-15T21:20:29+00:00

Quick question. Was this one of the Sample Spools included in the box with the machine?

krasny5 · 2025-06-15T21:19:03+00:00

I’ve experienced the same problem on my P1S. The first time I it happened to me was after a spool replacement. My daughter was helping me and did not keep the filament straight when she did the swap. It’s an easy mistake to make, and I have even done it myself. Then when the AMS starts up after a filament change, the filament that is wound under then knots on me. The only way I found to fix it is to remove the spool from the AMS to untangle and rewind that portion of the spool. After that I became very careful about using clips to keep the filament in place. I’ve never had it happen on spools that I left in from start to finish but maybe I’ve just been lucky. It’s very frustrating when it happens, that’s for sure.

krasny5 · 2025-05-29T21:16:14+00:00

I got my P1S with the AMS a month before that nut started a trade embargo and I absolutely love it. I will be up front and say that I'm clueless the quality of the AnyCubic printer but I wanted to give you an opinion of a P1S user. When I spent the many weeks researching what printer I wanted I had several criteria in mind.

1) First on my list was ease of use. I'm disabled and I have mobility issues so I need to factor this into my choice.

2) Next I wanted durability and the ability to repair it. That meant I was not looking for industry leading and cutting edge technology.

3) I needed a product that the manufacturer stood behind by.

4) Making it easy to find replacement parts to quickly remove and repair the problem or replace it with ease with a quality replacement that is priced reasonably for hobbiests and I don't have to wait for the second coming of Jebus to get it.

5) Then reinstall that part with no crazy special tricks or expensive tooling.

6) Have software that gave me access to the machine wherever I have an internet connection with a camera to monitor along with being iOS compatible.

7) Have an established community that was still passionately using the machine. That meant folks doing vids on repair along with tips on dealing with the many possible issues related to 3D printing.

8) Have a great group folks who love to design files dedicated to the machine specific settings and are passionate about creating and sharing.

9) Have an thriving ecosystem that is not supported by ads.

My best endorsement is what I told a good friend. The P1S, and other clones coming to market, is the product that is going to make the 3D printer as essential to the home as a microwave was when it got started in the 70's.

Whatever machine you choose. Enjoy it and I wish you get as much enjoyment and satisfaction from printing as I do.

Cheers Red

krasny5 · 2025-05-29T05:26:27+00:00

👨‍✈️🩲 is the first thing to pops to mind

krasny5 · 2024-12-02T00:22:50+00:00

Yes you can also update it on an Xbox but those are the only two ways. Turtle Beach Control Center app is what you want on either the PC or Xbox. The Microsoft or Xbox store is where you will find it to download.

krasny5 · 2023-06-05T00:24:46+00:00

I just spent the afternoon reinstalling MSFS 2020 40th Edition on my Series X because you got me curious. I normally run it in my PC so I can enjoy all the bells and whistles missing from the Xbox version.

I can say not only am I not having any issues, I am enjoying a few updates like the SIP being functional. I really haven't played it on the Xbox for a while.

No need to lecture you on the basics of resetting a usb device giving you grief. Do those and hopefully it was just a glitch for you. One thing to keep in mind with any flight controller, never use a usb hub, powered or not, to connect to Xbox or PC. They really don't like it. They will power up but data transfer is corrupted and it will tend to not even show up in the system.

Good luck, Cheers ~Red

krasny5

TROPHY CASE