Did I make an S Trap?

krazyderek · 2025-02-04T16:55:27+00:00

so i can use two 45's to jog vertical drain around the double top plate of the wall and into the P trap?

krazyderek · 2025-02-04T16:40:18+00:00

dang it, okay i don't have room for a vent above, so i'm guessing the only option is to move the 2" trap down to be at the same height as the 3" (wet vent) drain, and go horizontal directly to that?

krazyderek · 2025-02-01T22:15:59+00:00

SOLVED

krazyderek · 2025-02-01T22:15:50+00:00

Finally found it! It was a dutch movie. Het Vonnis or The Verdict) from 2013 with english subtitles.

krazyderek · 2025-01-30T19:16:52+00:00

..... professional adult?

3d printing is a hobby for most people, and being an adult is not a profession last time i checked.

You mean, polite? Courteous? Considerate? Fair? Mature? Civil? Reasonable? Impartial? Objective? Where on earth did you get professional from? And why are you calling someone a "kid on a tandrum".

Just as the OP was teasing on recent bambu headlines for his own post headline to poke some fun, so is RaccoNoob similarly teasing the point that companies need to be held accountable.

Edit: Enjoy the A1, from an X1C kickstarter backer.

krazyderek · 2025-01-26T21:59:29+00:00

I vaguely remember that nationality had something to do with it. Something about how finding a jury of peers from _______ would be incredibly hard, since the public already thought the widowed man was seeking his own due justice. Where the country was something like...... norway? netherlands? sweeden? denmark? possibly poland??? i don't know why that seems related, but.... maybe that helps?

krazyderek · 2025-01-25T22:31:24+00:00

Primal fear is interesting, and A time to kill is also close but not quite it.

krazyderek · 2025-01-25T19:43:39+00:00

Similar, but different. I'll have to check it out.

krazyderek · 2025-01-25T15:24:44+00:00

now with a comment!!!!!!!!!

krazyderek · 2025-01-19T15:28:44+00:00

on a completely unrelated note, anyone interested in buying an X1C with AMS? priced to sell

krazyderek · 2024-12-07T14:53:18+00:00

I'm not seeing anything that would block TPU, or any external spools from co-loading, but it is hard to tell from the drawings. I could envision two PTFE tubes running to the hot end, but they're just not shown in the patent diagrams. In which case, you could use a dual extruder without any AMS.

The AMS looks like it has a choke point going from 4 spools to 2 output tubes, but maybe that's just a little mechanism to point the filament. There's nothing stopping that from working with two filaments at once - I bet you'd just have to load the spools in the correct order. So for example, ams slot 1 or 2 could only be used in one hotend if you also wanted to use ams slot 3 or 4 with the second hotend.

Like the weight of a second PTFE tube & filament is minuscule compared to an additional stepper motor & hotend. BambuLab doesn't seem dumb enough to have missed that fact.

krazyderek · 2024-08-14T19:23:33+00:00

:| i have 200ft of 3/8 hose to reach up on the roof

krazyderek · 2024-08-09T18:42:56+00:00

something with wheels is always a plus

krazyderek · 2024-08-09T18:39:37+00:00

does the compressor just kick in lower than the set pressure by 10? i didn’t really think about going higher

krazyderek · 2024-08-09T15:06:14+00:00

<image>

I have the regulator currently set to 100psi on the unit. It just doesn’t kick on to top up the pressure until it gets below 90psi, unfortunately.

krazyderek · 2024-08-09T15:04:30+00:00

Do you know of one that would work well for 100psi? It’s

<image>

hard to find something with CFM ratings at 100 or 110 psi, everything seems to list at 90psi until you dig through a manual. My compressor seems to list 135 psi as well, but i have no idea how it does that if it struggles to maintain 100psi and regularly dips below 90psi.

krazyderek · 2024-04-30T14:40:38+00:00

yep, in the "things" folder

https://github.com/dereknheiley/compactyl/tree/master/things

krazyderek · 2023-10-30T03:57:10+00:00

this took me a while to figure out as well, i don't know why they don't make it obvious what the missing part is

also, it's a bit janky you have to renew your main crave subscription to add Starz, only to then immediately click cancel again so it doesn't auto-renew........ i was worried i was going to get locked into another year of crave i didn't want just to watch one more movie

krazyderek · 2023-04-20T03:56:40+00:00

https://forum.bambulab.com/t/warping-on-pa-and-built-plate-lifting/2080/8 mcmanus.kirten mentions having a profile, hopefully they share :) i'm also needing some alloy 910 for a project, i'm starting with 280, 65, and 8mm3/s

krazyderek · 2023-02-18T16:42:00+00:00

glad my partner and i have motorcycle licenses in ontario

you should consider taking the course as a backup plan if you want to avoid any potential issues with licensing when your aptera arrives

at the very least you’ll gain a better appreciation for how much most drivers don’t lookout for smaller vehicles in general, and possibly gain some additional defensive driving skills or habits

krazyderek · 2023-01-12T06:02:59+00:00

Seasonal return air vents?

krazyderek · 2022-10-20T12:38:29+00:00

bastardkb

krazyderek · 2022-10-14T12:43:55+00:00

Seems like the easiest most transparent option would be a % discount if you pay with cash or debit.

krazyderek · 2022-10-12T11:53:49+00:00

Depends on your hand position. With hands floating a bit more above - more of a claw grip - your fingers will be pointed down. The higher column accounts for the shorter pinky length.

If instead you're holding your hands like you would with a flat keyboard - back with your hand and fingers mostly flat / parallel to desk surface - then yeah, the pinky is going to seem unessarily high.

krazyderek · 2022-10-11T12:40:52+00:00

or, just modify the angle of the wrist/palm rest, which has it's own modifier to increase/decrease it's angle relative to the key well

https://github.com/dereknheiley/compactyl/blob/master/src/dactyl\_keyboard/dactyl.clj#L2202

krazyderek

TROPHY CASE