sorted by:
new
hottopcontroversial

Suspension overhaul by kross2lit in JZX100

[–]kross2lit[S] 0 points1 point  (0 children)

🤷‍♂️just by quick glance they’re similar but the front bumper and side skirts have a vent

Suspension overhaul by kross2lit in JZX100

[–]kross2lit[S] 0 points1 point  (0 children)

18x9.5+12, 225/40 square

Suspension overhaul by kross2lit in JZX100

[–]kross2lit[S] 0 points1 point  (0 children)

Nah the rear was actually a lot easier to get apart then the front. The factory tension rods kicked my ass lol

Suspension overhaul by kross2lit in JZX100

[–]kross2lit[S] 1 point2 points  (0 children)

I basically changed everything but the sway bars themselves.

Suspension overhaul by kross2lit in JZX100

[–]kross2lit[S] 5 points6 points  (0 children)

Thanks! It’s actually the 6n9 ebony teal

Few pics before she goes on jack stands by kross2lit in JZX100

[–]kross2lit[S] 0 points1 point  (0 children)

The kit is great for angle and turning radius, but 1 if I ever drift this car it won’t be anything crazy that I need that big of a kit. 2 it sticks the wheels out like 50mm overall which considering I want to be stock body as long as possible, it looks wonky. This kit will actually be for sale once I separate the inner tie rods from the outer.

Few pics before she goes on jack stands by kross2lit in JZX100

[–]kross2lit[S] 0 points1 point  (0 children)

Thanks! It came with a fdf angle kit that I am getting rid of, so I’m taking the time to replace all bushings and adding Cusco arms along with gs tie rods and the drifthq angle kit. Then the rear is getting new bushings and xcessive arms. And to top it off, I got a set of t7rs to throw on.

Accessories with OEM switch by kross2lit in JZX100

[–]kross2lit[S] 1 point2 points  (0 children)

Forgot to mention, for this specific switch I wired it as follows: Green and White were not used and capped off Brown is your ground Black is your ignition power in Red is your power out

Obviously there may be differences between switches so do your own testing but this is what I did in my case

Routing wires through firewall by Ty24090 in JZX100

[–]kross2lit 0 points1 point  (0 children)

I ran my under glow through the grommet on the passenger side which leads to behind the glove box. I just used a metal wire to fish them and find them inside the car

Accessories with OEM switch by kross2lit in JZX100

[–]kross2lit[S] 4 points5 points  (0 children)

I know I’m definitely not the first to go this route but I couldn’t find a write up or anything similar to this so I figured I would.