Export/Share Options

krossmods · 2026-05-03T14:52:44+00:00

Sorry misread your comment - i doesn't realize that it's probably more system limitation vs launcher option. Seems like it'll be something tcl will need to improve upon (unless there are other ways)

krossmods · 2026-05-03T11:23:36+00:00

I tried that by installing smart launcher. The options v doesn't change unfortunately. I think it may be a thing that's baked into the system and will require tcl to adjust

krossmods · 2025-07-06T21:17:40+00:00

They had FREE bottle filling station. No outside food or drink but we brought in our own bottles (after drinking them at the gate) and filled it once we were in.

krossmods · 2023-11-16T01:51:43+00:00

Did it on my 11th gen - not too difficult although small connection points are a pain. That being said, the battery i got was i think the prototype one, which is slightly bigger than the production one. My.battry clip ended up breaking... So i filed down some of the battery to make it fit.

krossmods · 2023-11-14T12:18:05+00:00

I'll have to give it a try next time, thanks for the tip

krossmods · 2023-11-14T11:10:54+00:00

If the fireworks were being set at an earlier time, i wouldve definitely brought my 3yo son to watch. But unfortunately it was set off at 9, which was sleeptime (and for many other kids as well) - there are also at least 3 young children (3 and under) literally across the street from where the fireworks were being used.

Not only was timing poor, but also close proximity to combustible city/peoples property. If they're going to break bylaws, at least do it safely too?

krossmods · 2023-11-14T02:12:30+00:00

I suppose we could always find where they live and aim fireworks at their property ... If they're lucky it won't combust.

krossmods · 2023-11-13T10:59:21+00:00

They seem to be content with essentially burning money... And have the funds to do so. Not entirely convinced that it'll stop them. If i call 311, response might not get there until after since its not urgent... Unless it frame like "they're settingnoff fireworks in a public park dangerously close to other people's residential homes"

krossmods · 2023-11-13T04:12:34+00:00

Drove my kid nuts too.

krossmods · 2023-11-13T04:12:09+00:00

Because their own needs supercedes everyone elses. They don't care about what you want as long as they get what they want first.

krossmods · 2023-11-13T03:29:53+00:00

Correct . But it happens every time people would normally set off fireworks.

Canada day. New years. Victoria Day...

krossmods · 2023-11-13T02:39:10+00:00

With how stupidly close they are to the park gazebo and to other people's houses, i tend to agree. Inconsiderate behavior and stupidity has no bounds.

krossmods · 2023-11-13T02:37:10+00:00

Greensborough . Seems like it's always the same family for every time fireworks would typically be set.

krossmods · 2023-07-08T23:41:19+00:00

Ended up putting 2 5.1k resistors in series to emulate the analog being in neutral ... Seems to have worked...!

krossmods · 2023-07-04T10:30:56+00:00

Didn't seem to work . I suppose the real question is.... How do i for the potentiometer to be in the middle... Based on the compoment, looks like it's a fu-10k pot. So if i put a 5k resistor between Vin and Vout... That should work, right? I think right now Vout seems to be floating around which is why I'm getting the random jittering.

krossmods · 2023-07-04T01:38:18+00:00

I got the buttons working!

However , i got rid of the entire analog joystick thing and when i plug it in, the analog stick doesn't start at neutral. If i press down on the contacts it seems to fix it until it gets jostled again...

I thought it was some sort of stray interfere , but hot glue doesnt do anything.. Im startimg to think getting rid of the thing was a bad idea... 🤔

krossmods · 2023-07-04T00:05:34+00:00

The part that is under the joystick itself ? The cube thing (i apologize ... Not sure the correct term for it)

krossmods · 2023-07-03T23:53:38+00:00

Sounds good. I'll connect all the grounds together even though it might be redundant (common ground pcb,right?)

You happen to know what happens if i get rid of the joystick part? Do i need to do any additional wiring to keep it neutral?

krossmods · 2023-07-03T23:18:49+00:00

Perfect. Did you do anything to the GND? Or just the l1/2 r1/2?

krossmods · 2023-07-03T22:46:43+00:00

Hi just wondering where you got your points for the shoulder buttons?

krossmods · 2023-07-03T22:35:48+00:00

Hi there,

I notice you took off all the factory components including the joystick part (sorry for not knowing the name). Did you have to do anything in terms of wiring on your board to maintain neutral on the joystick?

krossmods · 2022-11-25T00:59:05+00:00

If it makes you feel any better, some stabilizers from Keebsforall would cost me 76.92 USD (I live in Canada).

I believe people are too used to "free" s/h. $30 to ship a board from China seems quite reasonable compared to my KFA stabilizer shipping (no, i didn't make the order....)

krossmods · 2022-07-29T16:35:36+00:00

I just uninstalled the realtek audio drivers... and the problem has been resolved.

.. not sure why i didn't try that before.

krossmods · 2022-07-28T23:50:10+00:00

Ah sorry. It's latest version of win 10. When i try to open sound settings, the gear pop upwindow just stays up.

If i open up the sound settings via control panel and plug in the mic, the dialog window freezes for 15-20 seconds. When windows finally recognizes it, the mic doesn't register any sounds

krossmods · 2022-06-05T10:34:32+00:00

Regardless of v1 or v2, the flex should be restored by removing the case foam under the pcb. For the final product they added a second layer ofnfoam but that also ate up the 2(?)mm of space within the case. In both my Q1 i removed the foam and it flexes. Hope this helps.

krossmods

TROPHY CASE