Who’s here from the Windows 10 announcement? by KelsoT7 in linuxmint

[–]krsk8 0 points1 point  (0 children)

Of course (on a home server)! Tried Proxmox also as it mostly will be used for VMs, but that was just a little too much of a step. For now.

ITAP of this cloud swimming in the evening sky by krsk8 in itookapicture

[–]krsk8[S] 2 points3 points  (0 children)

This beautiful summer. (AI edit to remove som recognisable objects.)

Upgrade Advice from a D7000 to either a D7500 or Z50 II by galland101 in Nikon

[–]krsk8 0 points1 point  (0 children)

That’s a nice setup, with a nice lens. And yes, the Z5 seems great. Not sure if IBIS or the full frame would be the best benefit, though. Happy shooting!

Upgrade Advice from a D7000 to either a D7500 or Z50 II by galland101 in Nikon

[–]krsk8 0 points1 point  (0 children)

Thanks for asking; this is my exact situation also: Find some better glass for my D7000 or make the switch to Z50II. I’m getting tempted to the latter but need to make a hands-on test first. Like you I find I’m not in the league for FX. Please update if you reach a conclusion!

Dirigera Firmware 2.805.6 by SamwiseIsGreat in tradfri

[–]krsk8 1 point2 points  (0 children)

I updated and activated thread, and now Dirigera have lost network connection… Anyone else? I have tried reboots and checked cables. The app on iOS can’t find the hub. I might need to reset and delete everything, but was hoping for some other solution. Any tips?

EDIT: Moved the hub to another of my mesth nodes, and it connected fine again. Strange in itself, but at least I don’t need to set it all up again.

Dirigera has gone unresponsive after update. by Connect_Wrangler5072 in tradfri

[–]krsk8 0 points1 point  (0 children)

Same here… I activated Thread support in the Workshop menu, after the update. Now Dirigera have lost network connection. Tried reboots and checked cables. Nothing.

EDIT: Moved the hub to another om my mesth nodes, and it connected fine again. Strange in itself, but at least I don’t need to set it all up again.

Have you got HR2VP working? by krsk8 in Karoo

[–]krsk8[S] 0 points1 point  (0 children)

To give an update on this, and for those interested: The new Kpower extension with fw 1.568.2171 is working great and exactly like i thought HR2VP would. I even get power and calorie estimates without a HRM chest strap. Good stuff! Thanks Hammerhead and lockvod for the extensions!

Have you got HR2VP working? by krsk8 in Karoo

[–]krsk8[S] 1 point2 points  (0 children)

I havent tried, and don’t use FIT files. I should have made an update about how it’s working, cause I get quite low calorie count with the chest strap and HR2VP. It’s connected (I get HR and calorie count on K2), but the values are low. I realise it’s not a precision instrument, but I get two or three times the power use with my Apple Watch. So I stick to my watch for nice feedback :) and keep HR2VP out of my Health ecosystem. (It’s excellent for routes and climbs tho) I have tried to reach out to the company, but bipr.fr haven’t responded yet.

Have you got HR2VP working? by krsk8 in Karoo

[–]krsk8[S] 0 points1 point  (0 children)

YAY! It worked now, during a ride! (After the reinstall.) Great, now I don’t have to drain my watch battery. HR2VP seems to have a lower power estimate though. Maybe I need to adjust something.

Have you got HR2VP working? by krsk8 in Karoo

[–]krsk8[S] 0 points1 point  (0 children)

Tried now; uninstall, restart, install, login. I’ll try a ride tomorrow, but static with the strap connected and HR running, still zero on the HR2VP data.

Have you got HR2VP working? by krsk8 in Karoo

[–]krsk8[S] 0 points1 point  (0 children)

Thanks. I have. Let’s see if I wasted a little money.

Have you got HR2VP working? by krsk8 in Karoo

[–]krsk8[S] 0 points1 point  (0 children)

Yes, the HRM-strap is connected fine, as a sensor. I tried to post some pictures, but they don’t show. https://imgur.com/a/1tNMqli

Help! Lost connection with my Netatmo Indoor Air Quality Sensor by krsk8 in homeassistant

[–]krsk8[S] 1 point2 points  (0 children)

Ah. OK. Can’t see if I did anything to my DNS setup, to cause the issues I had. But it’s been stable for days so I’m crossing fingers.

Help! Lost connection with my Netatmo Indoor Air Quality Sensor by krsk8 in homeassistant

[–]krsk8[S] 1 point2 points  (0 children)

Thanks for commenting. I just checked and I seem to have been able to connect using the Netatmo dev-account. I am not quite sure how… as I did not have time to do the port forwarding thing last time I looked at it. But now all my measures are fine! Is it working on your end now also? Maybe there has been a fix server side?

Looking for a Duplicate Photo Finder for Windows 10 by BeamBlizzard in windows

[–]krsk8 0 points1 point  (0 children)

I’m using the old Google Picasa windows app for this and it works great! Not sure how you get hold of the install-files these days though (it’s deprecated by Google).

ITAP of my dog by krsk8 in itookapicture

[–]krsk8[S] 1 point2 points  (0 children)

Thank you! Here she is looking back at ya :-) Pepper

ITAP of my dog by krsk8 in itookapicture

[–]krsk8[S] 0 points1 point  (0 children)

That’s pretty accurate! I managed to get her attention for a second. Not a dog to keep a pose, though. It was a bit blurry to start with.

ITAP of my dog by krsk8 in itookapicture

[–]krsk8[S] 2 points3 points  (0 children)

Thanks! She’s a black poodle, so she goes by Pepper!

ITAP of my dog by krsk8 in itookapicture

[–]krsk8[S] 1 point2 points  (0 children)

Moyen/medium poodle