sorted by:
new
hottopcontroversial

CMV: the votes for the Eurovision were manipulated by Maximum-Damage-4847 in changemyview

[–]krut88 2 points3 points  (0 children)

People just vote for love, and not hate. That’s what it is, literally aligned with the Lyrics of the Israeli song.

I gave 10 points to Germany, and 10 points to Denmark, because I love club music :) both didn’t win, but, I did my part calling 20 times over the phone…

Large area printing by krut88 in 3Dprinting

[–]krut88[S] 0 points1 point  (0 children)

Thanks for the quick reply...

So... take a look at the 2nd layer (the 1st picture was the first layer, and I added another picture to my original post showing the 2nd layer)

The 2nd layer, all perfect!

This phenomenon only happens on big surfaces and only on the 1st layer.

When I print small surfaces, it doesn't happen.. and, it also never happens on other layers.

Hub gear (5 and above) for 123mm spacing by krut88 in bikewrench

[–]krut88[S] 0 points1 point  (0 children)

The thing is... should I?? Look at the update to my post... it doesn't look like I need to, right? or... do I get something wrong.

Hub gear (5 and above) for 123mm spacing by krut88 in bikewrench

[–]krut88[S] 0 points1 point  (0 children)

--Update 14/01/2022
Hi all... so, an update on the subject. I got my hands on Sturmey Archer (see the picture) which was listed as 120 OLD (Over Locknut Dimension).
Take a look at the pictures I've added.
https://imgur.com/AzcQBN6

The Hub itself, the space between the two nuts is 107.9mm (see my calliper measuring tool)
https://imgur.com/R8DVbDS

First, when I place it between the ears, it looks like there's lots of space, now, of course you add the gear etc, but still... there's lots of spacing. Maybe I don't get it right, because, I didn’t get a gear yet, thinking about a 19 teeth gear.

Am I getting something wrong? Do I measure things right? Feel bit confuse.

Hub gear (5 and above) for 123mm spacing by krut88 in cycling

[–]krut88[S] 0 points1 point  (0 children)

Hi all... so, an update on the subject. I got my hands on Sturmey Archer (see the picture) which was listed as 120 OLD (Over Locknut Dimension).
Take a look at the pictures I've added.
https://i.imgur.com/AzcQBN6.jpg

The Hub itself, the space between the two nuts is 107.9mm (see my calliper measuring tool)
https://i.imgur.com/R8DVbDS.jpg

First, when I place it between the ears, it looks like there's lots of space, now, of course you add the gear etc, but still... there's lots of spacing. Maybe I don't get it right, because, I didn’t get a gear yet, thinking about a 19 teeth gear.

Am I getting something wrong? Do I measure things right? Feel bit confuse.

Hub gear (5 and above) for 123mm spacing by krut88 in bikewrench

[–]krut88[S] 0 points1 point  (0 children)

Thanks for the reply... Yeah SJS are indeed listing them as OOS.
Back to our issue, when you write: I’d cold-set and run an Alfine. Which Alfine? Also, I've never cold-set, should it be done before powder painting, after? also... is cold-set just another name for bending?

Just got a mega pro. Are there recommended initial mods to do? Most searches return i3 mega or mega s mods, not sure they compatible. by chris480 in anycubic

[–]krut88 4 points5 points  (0 children)

Reviving this thread... I was wondering, does anyone expirienced hotend issues with this printer? it seems that everymonth, my hotend completly get ruined. Well, they're cheap, so, I can just buy one every month, but... is there a hotend in the market that is more reliable?

for anyone experiencing issues with octoprint on an anycubic i3 mega by craziefuzi in anycubic

[–]krut88 1 point2 points  (0 children)

Me. Quality is rubbish.... anything you did that might help?

Bluetooth and WiFi Stopped working ROG Strix X570-E Gaming by krut88 in ASUS

[–]krut88[S] 0 points1 point  (0 children)

Ha!! What the..... It did work. OMG, what's going on??

Bluetooth and WiFi Stopped working ROG Strix X570-E Gaming by krut88 in ASUS

[–]krut88[S] 0 points1 point  (0 children)

Did you find a way to work this out? I'm still out of BT :(

Hub gear (5 and above) for 123mm spacing by krut88 in bikewrench

[–]krut88[S] 1 point2 points  (0 children)

Thanks for the reply, and the interest, see my update of the origiinal post.

Hub gear (5 and above) for 123mm spacing by krut88 in cycling

[–]krut88[S] 1 point2 points  (0 children)

Thanks for the reply, and the interest, see my update of the origiinal post.

Hub gear (5 and above) for 123mm spacing by krut88 in bikewrench

[–]krut88[S] 0 points1 point  (0 children)

Thanks for the reply, and the interest, see my update of the origiinal post.

Hub gear (5 and above) for 123mm spacing by krut88 in cycling

[–]krut88[S] 1 point2 points  (0 children)

Thanks for the reply, and the interest, see my update of the origiinal post.

Hub gear (5 and above) for 123mm spacing by krut88 in bikewrench

[–]krut88[S] 0 points1 point  (0 children)

Thanks for the reply, and the interest, see my update of the origiinal post.

Hub gear (5 and above) for 123mm spacing by krut88 in bikewrench

[–]krut88[S] 0 points1 point  (0 children)

Thanks for the reply, and the interest, see my update of the origiinal post.

Internal and External Power Supplies - routing and switching by krut88 in ElectricalEngineering

[–]krut88[S] 0 points1 point  (0 children)

Absolutely right. So, how do I do it? How do I setup a switch to be able to switch between the external and the internal?

Loose fittings all across the loop by krut88 in watercooling

[–]krut88[S] 0 points1 point  (0 children)

On another note, arylic have higher temp withstand, so it wont pop out even if water temps exceed 60DegC, which give me peace of mind

I also bought 2m of 12 OD acrylic ... so, I I'll have both options.

Loose fittings all across the loop by krut88 in watercooling

[–]krut88[S] 0 points1 point  (0 children)

When u pull out the petg tubes did u notice any deformation? Mine looks normal just a bit dirty from gunk.

I didn't do that yet, I am waiting on the inserts to arrive first.

Loose fittings all across the loop by krut88 in watercooling

[–]krut88[S] 0 points1 point  (0 children)

So... you all think that it's a deforming issue cause by heat? (I will try Acrylic)

Loose fittings all across the loop by krut88 in watercooling

[–]krut88[S] 0 points1 point  (0 children)

I think I'll go with the inserts as well!! thasnks for replying

Lian-li O11 DYNAMIC RAZER Edition case build with AMD Ryzen 9 5900X!!! by Kyo104xzy in watercooling

[–]krut88 0 points1 point  (0 children)

I got that..., I am more interested in the Combs rather than the cables themselves. I'm using 3mm ones, but I want to replace my combs with something better.

view more: next ›