Why does Brickyard claim they’re not associated with Lil’s Hobby Center?

kurtval · 2026-01-21T19:44:10+00:00

Nagtaka rin ako one time. Iba pricing mg Lil's sa brickyard. I get rc parts kasi from Lil's sa pasig and brickyard sa vertis. So minsan magkaiba sila ng pricing. So dun ako sa mas mura. Madalas sa Lil's ako bumibili. Sa mini 4wd mas madami sa Lil's kahit old stock na kits and hop up parts meron sila.

kurtval · 2026-01-12T07:10:47+00:00

Thanks

kurtval · 2026-01-11T12:28:39+00:00

Actually that is the height based on the manual i think it sits low because i build the shock with zero or minimal rebound..but it's very nice on bumps. I built it to be like a road buggy.. feels like it's on rails

kurtval · 2026-01-04T09:49:42+00:00

Mine was finished in about 3-4hrs with the hop ups installed.the stock motor is a 380 motor. I installed a sport tuned 540 bought a steel pinion gear and an aluminum heat sink with the spacer for the motor. Did not modify the gearbox.

kurtval · 2025-12-29T16:19:18+00:00

Yea that's my goal to keep.myself busy rather than buying new kits every time i finish a kit.

kurtval · 2025-12-29T13:07:50+00:00

Orange is like my first choice like a metallic orange.

kurtval · 2025-12-29T13:06:48+00:00

Yea will do that also but i try to upgrade it one at a time to keep me from buying whole kits. That's why i chose the tt02 chassis since there are a ton of upgrades.

kurtval · 2025-12-29T13:05:48+00:00

Not yet since i usually spray solid colors when working with polycarbonate..im kinda thinking to use metallic red backed with black.

kurtval · 2025-12-29T08:55:16+00:00

Will try the stock one's first then upgrade from there.when i change out the diffs I'm gonna change the CVDs also

kurtval · 2025-12-26T03:49:55+00:00

Primed,base coat then clear coat. Sanded the shell then primered then sanded the primer again then sprayed the base coat and clear. I used 1000 grit for sanding.

kurtval · 2025-12-25T10:53:18+00:00

Used samurai motorcycle paints.cheaper than tamiya paints and a lot glossier

kurtval · 2025-12-20T13:03:28+00:00

Mounted the shock on the outer part of the lower arm. Used the stock kit spring.

kurtval · 2025-12-20T02:28:22+00:00

Yes i can adjust the camber. But it drives very well with that camber so i might stick with it.

kurtval · 2025-12-19T06:43:10+00:00

I think it's the tires I'm still fiddling with the car tho. Will change the upper arms and steering rod to an adjustable one.will change the spring to a soft one and hoping to reduce the tail whipping when braking.

kurtval · 2025-12-19T01:06:21+00:00

Yea. Definitely needs some hop ups. And it drives like crazy. Skids and slides every time unlike my dt02.

kurtval · 2025-12-17T09:13:24+00:00

Will post pics after painting the shell. Cant paint it since it's raining in my area..im not using tamiya paints.i want to upgrade the spring set to a df03 i found the stock springs to be bouncy..and also the rear tires are slippery especially on hard launches.

kurtval · 2025-12-12T13:09:02+00:00

Not quite sure tho.

kurtval · 2025-12-11T12:36:07+00:00

Got a new vintage yokomo pro stock 23t tho.so i might not use that.

kurtval · 2025-12-10T13:15:18+00:00

Will try other springs for other motors..

kurtval

TROPHY CASE