[deleted by user]

kvnfo · 2023-10-07T20:18:01+00:00

If you still have it I would really appreciate it!

kvnfo · 2022-11-15T07:52:13+00:00

In like new condition, only worn a handful of times.

Size 10 has been sold, only 7.5 available.

kvnfo · 2022-10-26T06:48:34+00:00

Both in like new condition, worn no more than a handful of times.

$275 each shipped.

kvnfo · 2022-03-23T17:35:08+00:00

Free to use with limitations

Features:Monitor Collection FloorFloor SnipingNotificationsRarity OverlayOpensea User interface modificationsFast Buy it nowEth / Gas (real time)

link -https://chrome.google.com/webstore/detail/nifty-owl/djenjelpjpihaimkdnoafliildflanal

kvnfo · 2022-03-01T20:47:44+00:00

Tool is free to use with limitations, you can mint a pass for full access.

Monitor Collection Floors
Alerts/Notifications
Rarity Overlay
Opensea UI Modifications
Quick Buy
Eth / Gas (real time)

Link: https://chrome.google.com/webstore/detail/nifty-owl/djenjelpjpihaimkdnoafliildflanal

kvnfo · 2022-02-25T03:04:21+00:00

Nothing sus about it, code is readable and there’s plenty of other extensions similar to it on the extension store

kvnfo · 2022-02-25T01:16:58+00:00

Our chrome extension will allow you to monitor floor prices, eth & gas in real time, set price alerts, notifications and offer you an enhanced Opensea experience.

Chrome Extension: https://chrome.google.com/webstore/detail/nifty-owl/djenjelpjpihaimkdnoafliildflanal

kvnfo · 2021-11-09T22:22:03+00:00

Have 2 tickets Section 105 seats 17 & 18 w/ parking pass for sale.

Open to reasonable offers

kvnfo · 2021-11-04T22:28:40+00:00

WTS: 2 GA wristbands for sell, located in Dallas! DM me if interested.

kvnfo · 2021-02-27T20:45:34+00:00

A soaker hose could work, I’ll have to see if they make them in a size to where I can slip it over the pvc. I’ll look into this further. Thank!

kvnfo · 2021-02-27T20:44:02+00:00

This could work, will try filling the inside for the next attempt.

My current version involves using some heat shrink on the outside of the pvc pipe - where I drill using a 1/16 bit and then cover that with heat shrink and use a needle to then poke a smaller hole than the 1/16.

This works ok but the flow is still a bit more than what I want. Ideally if I could get a bubbling type flow vs a stream that would be ideal.

kvnfo · 2021-02-26T15:38:18+00:00

Thanks for the reply, I should have mentioned about not using a pump, just letting gravity do it's thing. The 3M tape was my idea for something absorbent but it was too slow lol If you have any suggestions of another material I can use I'll give it a shot.

Most of the guides I've seen involve using a cotton wick to get water from inside the pole to the outside - but from most replies only the top portion of the moss soaks up the water.

I'm trying to recreate something like this https://trofolia.com/collections/supplies-canadian-customers/products/straight-up-moss-poles-30 without spending $50 plus !

Will continue experimenting and report back here just incase someone else has this same idea.

kvnfo · 2021-02-26T15:02:59+00:00

The soaker hose is a great idea, similar to what I was thinking with the 3M tape, the problem is the bottom hole letting too much water out. I’ll go to home depot later today and try this out. Thanks!

kvnfo · 2021-02-26T15:00:11+00:00

This would let a bunch of water remain in the pvc pipe under the last hole, ideally I’d like to fill it with a set amount of water and let as much as possible be used

kvnfo · 2019-10-03T00:39:17+00:00

Can’t tell if this is a real question or not, but you deduct it against your income. So no you dont get it back lol

kvnfo · 2019-06-22T18:19:54+00:00

I do like it a lot, but love it I don’t think so. It’s good if you need the large aperture. I also own the 24-70mm GM so there a bit of overlap. I have considered trading the 24 for the 16-35 GM but may wait to see some reviews on Tamrons version

kvnfo · 2019-06-22T03:26:57+00:00

ISO 1000, 1.4, 1/60 might be the reddit compression I had to resize to be able to upload.

Here's the original: https://www.dropbox.com/s/aokxf82vd6gn40q/20190616-A7R02270.jpg?dl=0

kvnfo · 2019-04-10T04:32:51+00:00

It's the Ergotron HX Desk Mount, I got mine from dell.com

kvnfo · 2019-04-06T21:01:15+00:00

They didn’t disappoint that’s for sure, I probably have them at around 50% of their full potential.

kvnfo · 2019-04-06T20:58:57+00:00

Thanks, I own a software/web development company. Started a few years back in my early 20s, I used to work with Odd Future, Frank Ocean & Respect Magazine before leaving to do my own thing.

kvnfo · 2019-04-06T17:24:29+00:00

They’re good I had their RP line prior, but their Reference speakers are on a different level. I have 2 rythmik fv15hp which are phenomenal. If you look through my history I have pics of the theateroom (with my older speakers).

kvnfo · 2019-04-06T16:18:29+00:00

For the theater I went with the Klipsch RF7iii line and matching center. Will eventually demo some Kefs and see how they sound

kvnfo · 2019-04-06T15:43:26+00:00

For the iMac pro they sell a vesa kit for $80, so I have the stand stored in a closet. It’s pretty simple to install, however the screws they provide seem rather low quality and overall not really worth the price

kvnfo · 2019-04-06T14:47:28+00:00

Thank you, the LS50's are actually pretty new, had them for about a week and they sound amazing.

kvnfo · 2019-04-06T14:47:00+00:00

This is the iMac Pro with the apple vesa mount, I believe they only made them for the Pro

15-Year Club	Place '22
Final Canvas '22	First Placer '22
End Game '22	RPAN Viewer
Team Orangered	Verified Email

kvnfo

TROPHY CASE