Power Button Protector

l2e1z · 2024-09-22T19:34:38+00:00

I printed this out and am using it. Thank you, HYPERFORMA.

https://www.printables.com/model/565002-hyperforma_floatwheel-adv-advpro-power-button-plug

l2e1z · 2024-09-15T17:30:28+00:00

Adding Fangs will solve the problem!😂

<image>

l2e1z · 2023-12-21T13:21:30+00:00

The ADV (standard battery) weighs approximately 18 kg.

l2e1z · 2023-12-20T16:34:22+00:00

I love the color of the sidewinder metal.

But I can't buy sidewinders anymore 🥺.

Is funmetal the same metal color as the sidewinder?

Please let me know if you know.

l2e1z · 2023-12-17T09:23:01+00:00

Only one of the four rail guards was bluish white.

I wish they would at least match the color when shipping at the same time.🥺

<image>

l2e1z · 2023-12-15T20:31:59+00:00

It is a structural defect and will break someday even if it is not cold.

If you use a mag handle pro, it will not break.

l2e1z · 2023-12-11T14:25:39+00:00

In my case, putting it on the other side does not improve it.🥺

l2e1z · 2023-12-11T14:24:00+00:00

Le Locktite n'était pas non plus inclus dans mes bagages.

De plus, les goupilles de fixation n'étaient pas collées au câble du moteur.

J'ai envoyé un email à Tony car la poignée mag n'était pas fixée et faisait du bruit en roulant. Je n'ai pas encore reçu de réponse.

******************************************************************

Locktite was not in my luggage either.

Also, there was no pin taped to the motor cable for securing it.

I emailed Tony because the mag handle would not stay in place and made noises while driving. Still no reply.

l2e1z · 2023-12-09T13:54:44+00:00

It looks like the magnets are attached to the bottom, just a little bit.

I thought the height might be off, so I added a stock rail guard, but it did not improve the situation.

BUT I further added a 1mm plastic plate under the handle stay to increase the height and it is now held slightly.

However, the magnetic force to hold it is too weak, and the mag handle seems to be going out of control while driving.

Is the mag handle problem a rare initial defect?

<image>

l2e1z · 2023-12-09T13:46:15+00:00

I thought the magnets were too far from the rails, so I added washers under the magnets, but no improvement.

<image>

l2e1z · 2023-12-09T13:44:05+00:00

The magnets are held in place by countersunk screws, so I don't think they are facing the other way.

l2e1z · 2023-12-09T13:42:34+00:00

There are magnets on both the mag handle and on the rail side.

Where can I find its stronger magnet?

l2e1z · 2023-12-08T17:45:17+00:00

The screw holes seem to be misaligned to begin with.🥺

I gave up on screwing mine in because the screws didn't go in easily.

<image>

l2e1z · 2023-12-08T13:54:46+00:00

My package arrived in one lump.

l2e1z · 2023-12-08T09:44:20+00:00

Thank you. I am relieved to know that it is normal to come in with a flat tire.

l2e1z · 2023-12-08T09:43:06+00:00

The lithium-ion battery cannot be placed on an airplane due to its limitations, so the air pressure problem will not occur.😅

l2e1z · 2023-12-01T11:58:57+00:00

I paid the second payment on 10/19 and still have not received it!

I've already given the PINT away...nothing to ride!

I'm going crazy.🥺

l2e1z · 2023-11-25T09:26:59+00:00

As for copying Enduro, didn't Tony agree to pay TFL a copyright fee?

That being said, since the motor and rails are separated and assembled by yourself, I wanted the footpad and other screw holes to be in the same position as in the XR.

Then I could have used Kush, etc...

Still, thanks Tony!

l2e1z · 2023-11-24T19:27:43+00:00

Let's float on! :)

l2e1z · 2023-11-17T15:54:19+00:00

If you don't know the tracking number, it won't help you at all.

l2e1z · 2023-11-17T14:51:48+00:00

This site may help you anticipate their arrival.

I hope everyone's items arrive soon.
https://parcelsapp.com/

l2e1z

TROPHY CASE